5 pagesV  « < 3 4 5 »  
 
REPLY
> NETGEAR JWNR2000-4EMRUS - Discussion | [wifirouter] Discussion
alex @ rya
Message#1
08.02.17, 16:08
WiedЕєmin
*********
[offline]

Group: Curators
Messages 10009
Check in: 04.09.13
Xiaomi Redmi Note 3 Pro Prime

Reputation:-  3397  +

NETGEAR JWNR2000-4EMRUS - Discussion


A photo:
Attached Image
Description:
The innovative and easy-to-install NETGEAR JWNR2000-100RUS router will give you the opportunity to create access to the Internet via Wi-Fi in a matter of moments. The presented model is universal, since it is designed to integrate with all types of connections. Due to the fact that the NETGEAR JWNR2000-100RUS router boasts an unprecedented speed of transmission of signals and data, you can send and receive any amount of information at lightning speed. The model is equipped with an advanced security system. The presence of a firewall allows you to protect your computer and the data stored on it from unauthorized attacks. This is due to the fact that the device blocks requests from the network for access to personal data. You will be pleased with the appearance of the device: a laconic design and a glossy stylish case will complement the interior of your home. In addition to the router itself, the power supply unit, a disk, a patch cord, and an ergonomic stand are included in the product package.
Specifications:
Internet connection (WAN)
Wireless Internet access: no
IPv6 support: no

Wi-Fi support: yes
Wi-Fi standards: 802.11b / g / n
Frequency range of Wi-Fi module: 2.4 GHz
2.4 GHz maximum speed: 300 Mbps
5 GHz maximum speed: none
Simultaneous work in two ranges: no
Transmitter power: 17 dBM
Type and number of antennas: internal x2
Antenna Gain: 3 dBi
Connection Security WEP, WPA, WPA2, WPA2-PSK, WPA-PSK

Number of LAN ports: 4
Baseline data transfer rate: 100 Mbps
Number and type of USB ports: no
USB port features: no

DHCP support: yes
Static routing: yes
Dynamic routing protocols: RIP v1, RIP v2
Dynamic DNS: yes

Firewall: yes
NAT: yes
SPI: there is
Demilitarized Zone (DMZ): yes
Filtering: by IP address, by MAC address

VPN functions: VPN pass through

Possibility of outdoor installation: no
Equipment power supply, materials CD, documentation, router, patch cord, stand
Additional information support STB-port
Dimensions Weight
Width: 173 mm
Length / Depth: 116 mm
Height: 33 mm
Weight: 216 g

Useful links:


There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links, or through QMS.
kotov666
Message#82
24.12.18, 08:39
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 56
Check in: 25.03.10

Reputation:-  0  +

Absolutely not clear pattern, once got access to the settings, eventually set up the SSID name, but then the settings again blocked the name of the wafer left which I indicated. After the reset, the SSID name changed to a home one. There are 8 of these routers and it’s not with one that hasn’t been done yet.
kotov666
Message#83
24.12.18, 09:11
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 56
Check in: 25.03.10

Reputation:-  0  +

The description and cap in the cap are not correct, it has a USB port
joy56
Message#84
24.12.18, 13:44
Novice
***
[offline]

Group: Active users
Messages 30
Check in: 16.01.15
Xiaomi Redmi Note 4 4/64

Reputation:-  0  +

Want to connect 4g modem to it? Has anyone got this done?
kotov666
Message#85
24.12.18, 17:32
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 56
Check in: 25.03.10

Reputation:-  0  +

* joy56, * joy56,

No, just flash drives.
joy56
Message#86
24.12.18, 17:51
Novice
***
[offline]

Group: Active users
Messages 30
Check in: 16.01.15
Xiaomi Redmi Note 4 4/64

Reputation:-  0  +

* Squat, Hello. Tell me, please, but you did not find the original firmware?
kotov666
Message#87
26.12.18, 04:23
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 56
Check in: 25.03.10

Reputation:-  0  +

joy56 @ 12.24.18, 22:51*
Squat, Hello. Tell me, please, but you did not find the original firmware?


There are only source codes which should be tried to compile.
joy56
Message#88
04.01.19, 08:44
Novice
***
[offline]

Group: Active users
Messages 30
Check in: 16.01.15
Xiaomi Redmi Note 4 4/64

Reputation:-  0  +

There is a very big interest to fasten huawei e3372 or huawei e3272 to it. Tell me where to start, maybe someone has been trying? Also I understand that most likely you will need openwrt?

Post has been editedjoy56 - 04.01.19, 09:14
kotov666
Message#89
09.01.19, 11:36
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 56
Check in: 25.03.10

Reputation:-  0  +

joy56 @ 01/04/19 13:44*
There is a very big interest to fasten huawei e3372 or huawei e3272 to it. Tell me where to start, maybe someone has been trying? Also I understand that most likely you will need openwrt?




Read the entire thread, it is not so big.
joy56
Message#90
09.01.19, 13:33
Novice
***
[offline]

Group: Active users
Messages 30
Check in: 16.01.15
Xiaomi Redmi Note 4 4/64

Reputation:-  0  +

5 times re-read. There are just a lot of routers in the city. Buy cheap can be. People need to use such routers somewhere.
joy56
Message#91
15.01.19, 20:57
Novice
***
[offline]

Group: Active users
Messages 30
Check in: 16.01.15
Xiaomi Redmi Note 4 4/64

Reputation:-  0  +

Tell me, please, how to fill in another firmware with it, for example with the extension bin? Or did someone manage to connect with a telnet?
v111v111
Message#92
17.02.19, 00:23
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 988
Check in: 01.04.14

Reputation:-  76  +

Sorry, that is not quite the topic, the question about the netgear jnr3210 (Realtek RTL8198) of a general order ... I don’t want to create a topic for the sake of a common question. Never dealt with netgear.
Tell me if the firmware contains netgear boot and how to determine if there is a boot loader or not. In tplinki for example, the presence of the boot is indicated in the name of the firmware ... And the size of the firmware TL-WR1043ND v.3 with boot is 8065 Kb, and without it 7936 Kb .. I don’t know how to be here ... This firmware is interested inhttps: //www.netgear.co...e%20Version%201.1.0.30
And better tell me how to cut it properly ...

Give a dump of the netgear JNR3210 ....

Post has been editedv111v111 - 17.02.19, 18:45


--------------------
Lenovo P70-A
miui9_Pro_8.3.8_by disega
Balavnic
Message#93
19.02.19, 15:58
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 114
Check in: 02.03.07
Meizu M3 Note 3/32

Reputation:-  0  +

Hello!
What is the login to log in via webmord from an external IP address?
How to spoil the entrance to the webmord from the local network?

Post has been editedBalavnic - 19.02.19, 16:00
Zorkpos
Message#94
17.03.19, 14:31
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 188
Check in: 09.05.13

Reputation:-  2  +

joy56 @ 01/04/19 12:44*
There is a very big interest to fasten huawei e3372 or huawei e3272 to it. Tell me where to start, maybe someone has been trying? Also I understand that most likely you will need openwrt?

there is no compilation of OpenWRT with USB support for this hardware if you don’t do it yourself. ;)
But there are other firmware that will make huawei e3372 or huawei e3272 work: D
SJEY_85
Message#95
18.03.19, 10:50
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 825
Check in: 30.04.11
LG G2

Reputation:-  6  +

Hello friends! Recently, the router has become very hot and often the Internet falls off. Already dismantled, cleaned, does not help. What could be? Or advise what to take as a replacement. JWNR2000
thank

Post has been editedSJEY_85 - 18.03.19, 10:51
theserfers
Message#96
18.03.19, 23:27
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 62
Check in: 12.10.14
Elephone P6000 Pro

Reputation:-  8  +

What could be? Or advise which one to replace

Power Supply? - to replace dlink 620f1


--------------------
In times of universal lies, telling the truth is extremism.
theserfers
Message#97
30.03.19, 23:15
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 62
Check in: 12.10.14
Elephone P6000 Pro

Reputation:-  8  +

joy56 @ 01/15/19, 20:57*
How to fill it with another firmware, for example with the extension bin? Or did someone manage to connect with a telnet?

telnet is but blocked. theoretically, you can run through com port. I assembled the firmware but how to fill it - without a clue


--------------------
In times of universal lies, telling the truth is extremism.
skinys
Message#98
10.04.19, 19:30
a guest
*
[offline]

Group: Users
Messages 1
Check in: 22.04.11

Reputation:-  0  +

I found the firmware with unlocking on YouTubehttps: //www.youtube.co…0UM-0&feature=youtu.beI sewed and made my settings under Rostelecom. While the flight is normal.

5 pagesV  « < 3 4 5 » 


 mobile version    Now: 04/28/19, 19:19