Assistant
REPLY |
Nomi C08000 Libra - Discussion | Tablet, 8 " |
Message#1 17.05.16, 23:24 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | DiscussionNomi C08000 Libra Nomi C08000 Libra Discussion �
Specifications ManufacturerNomi ModelC08000 Libra 8 ”3G 8GB Gray vendor codeC08000 Type ofAndroid tablets, Entry level, Tablet + Smartphone, 3G modem Matrix typeIPS (PLS) Display diagonal 8" (16:9) Resolution1280 x 800 px operating systemAndroid 5.1.1 Lollipop CPUIntel Atom x3-C3230RK (SoFIA 3G-R) (Intel claims that the chip bypasses the MediaTek MT6582 and Qualcomm MSM8212 1.5 times). Number of cores / threads 4/4 CPU frequency1.2 GHz (more precisely 1040 MHz (max. 1.1 - 1.2 GHz)) Graphic acceleratorARM Mali-450 MP4 Wireless capabilities3G, Wi-Fi up to 300 Mbps (802.11b / g / n), Bluetooth v2.1, Support GSM (phone) RAM size1.5 GB Internal memory8 GB Ability to make callsthere is Type of SIM-cardsmicroSIM Ports and connectors1 x Audio, 1 x microUSB Navigation systemGPS module Memory card supportmicroSDHC up to 32 GB Rear camera2 Mp Front-camera0.3 MP AdditionallyOTG Battery capacity3700 mAh Width(mm) 125.8 Height(mm) 208.1 Depth(mm) 9.96 Weight(d) 308 Photo Useful Getting root rights There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links. Post has been editedalex_bee - 24.06.17, 15:41 Reason for editing: Reduced to standard section |
Message#2 18.05.16, 00:04 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | Processor itself (specifications): Test in AnTuTu 6.1.4(not out of the box) The graphic accelerator, it seems, is not bad - Mali-450 MP4. ARM claim that the Mali-450 is almost twice as productive as the Mali-400. And then there's MP4 (4 cores). Out of the box is almost pure Android. Applications for a little more than 4 GB. Installed and work fine: Navigation- Navitel 9.4.0.75 (cards on external SD). A television- LazyIPTV + acestream from Market + MX player = (torrent-tv works). Phone- There is a conversational speaker. I installed the RocketDial dialer (for convenience). Office- Office Suite Pro 7 works. Actually now interests: The ability and ways to get root. This ������ downloadnotworks, checked.Who knows ifsystemicallyAndroid 5.1.1 launcher add desktops? And then there are only two. PS It looks like a seven-inch Nomi C07000, as an example for flashing and getting root, we are not “friend” - MT6582 is installed in it. Post has been editedalex_bee - 26.06.16, 23:44 |
Message#3 19.05.16, 00:13 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | [email protected], 23:04 Who knows, is it possible to add desktops in the Android 5.1.1 system launcher? I experimented a bit and found the answer: just take the application shortcut, being on the far right desktop, and drag it further to the right beyond the desktop. Another desktop appears. And so on. If there is only one shortcut, then removing it from the desktop removes the table. There can be no empty desktops in the system launcher. Post has been editedalex_bee - 21.05.16, 10:43 |
Message#4 19.05.16, 14:04 | |
[offline] Group: Moderators Messages 10052 Check in: 31.05.12 Asus ZenFone Max Pro M1 ZB602KL 3/32 Reputation: 750 | |
Message#5 20.05.16, 19:50 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | Windows 10 With the connection of the Nomi C08000 to Windows 10, no problems. The device is immediately seen as MTP. There is access to internal and external SD. Windows 7 Windows xp The device does not appear asMTP(solution below). Driver installationADB Interface(solution - post below)There are no drivers on CDC Serial. MTP solution: Connecting the Nomi C08000 to Windows XP In order to be able to connect the tablet with a PC, you first need to enable the “USB debugging” mode. This item is located in the “For Developers” menu. Turn on the “For Developers” menu: Open "Settings" ->“About the tablet”. Press about seven times on the menu item “Build number” (until the congratulations that you have become a developer) appear. The “For Developers” menu item will appear in the “Settings” section. Next, to configure the connection between the tablet and the PC, you need to do the following steps on the part of Windows XP itself: 1.Install or upgrade Windows Media Player to the eleventh version (how to install - see below); 2.Edit the data in the file: C: \ WINDOWS \ inf \ wpdmtp.inf (or copy ready instead (available in the attached)); 3.Install the MTP driver (is attached). To perform paragraph 1: Install Windows Media Player 11. When installing, there is a Windows XP authentication. If Windows is genuine, there is no problem. Install in the usual way. If not authentic: Method 1. 1. Download Windows Media Player 11 (there is in the attached). 2. Any archiver (for example, 7-Zip) unzip the downloaded file into any folder. 3. Run and install the files - first umdf.exe, then wmfdist11.exe, then wmp11.exe. 4. Restart the computer. If you have already set WMP11 in the usual way and are faced with an authentication problem, then this method (Method 1) will not help you. The solution is quite simple: Method 2. After installation, go to C: \ Program Files \ Windows Media Player and rename the file LegitLibM.dll, for example, to LegitLibM.dll_ (it will be equivalent to its removal, but if that, you can do the reverse renaming). When launching WMP11, Terer will again be offered to start Windows authentication, but if he agrees to launch it, instead of checking, the license agreement will pop up and the installation will continue. To perform paragraph 2 yourself: We connect the tablet to the computer to find out the hardware code (we are interested in MTP). To do this, go to the control panel and select "System". Next, open the “Hardware” tab and click the “Device Manager” button. Here we see that the system has found new equipment. Three CDC Serial, ADB Interface and MTP. We are interested in MTP. We click on it with the right mouse button and select the “Properties” menu item. Next, go to the “Details” tab. Then we need to select from the drop-down list: “Equipment IDs”. I have this code as follows: USB \ Vid_8087 & Pid_0928 & Rev _ ???? & MI_00 Copy the code and disable the tablet. Next, you need to make changes to the file wpdmtp.inf You will need to add the following line to two sections (Generic.NTx86 and Generic.NTamd64): % GenericMTP.DeviceDesc% = MTP, USB \ Vid_8087 & Pid_0928 & Rev _ ???? & MI_00 As a result, we must obtain the following data: ; Device is identified by Microsoft OS descriptor ; If your device doesn’t support it, use specific VID & PID for identification ; [Generic.NTx86] % GenericMTP.DeviceDesc% = MTP, USB \ MS_COMP_MTP % GenericMTP.DeviceDesc% = MTP, USB \ Vid_8087 & Pid_0928 & Rev _ ???? & MI_00 [Generic.NTamd64] % GenericMTP.DeviceDesc% = MTP, USB \ MS_COMP_MTP % GenericMTP.DeviceDesc% = MTP, USB \ Vid_8087 & Pid_0928 & Rev _ ???? & MI_00 Save the data in the file and connect the tablet to the computer again. It remains to install the driver we downloaded earlier for MTP. Note: By default, the C: \ WINDOWS \ inf folder is not visible. It is necessary to enable the display of hidden files. According to paragraph 3 We do everything the same as in paragraph 2, but right-click on the MTP and update the driver. Manually specify the location of the folder where the unpacked content will lie driver_mtp.rar (Drivers_ADB_MTP_CDC.7z is also suitable for MTP and ADB in windows xp, but also not suitable for CDC Serial). After all the actions done, the tablet should be “visible” to the computer. Soft: This is wmp11-windowsxp-x86-RU-RU.exe In driver_mtp.rar lies the ready wpdmtp.inf Attached files driver_mtp.rar(79.05 KB) wmp11.rar(24.58 MB) Drivers_ADB_MTP_CDC.7z(5.84 MB) Post has been editedalex_bee - 14.06.16, 12:10 |
Message#6 21.05.16, 20:42 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | *#*#4636#*#*This combination allows you to get to the service menu "Check" through a dialer. |
Message#7 22.05.16, 01:07 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | Driver installationADB InterfaceatWindows xp. 1. Connect the tablet to the PC with a USB cable. 2. RunAdbDriverInstallerfrom the archive below. 3. A window will open (picture below) if there is an inscription "OK" in placeIncorrect"proceed to paragraph 4. 4. Click the button "Install"-" Incorrect "changes to"OK". 5. ADB Interface drivers are installed. You can make sure of this in the “Device Manager”: Left to winCDC Serial. AdbDriverInstaller.zip(8.42 MB) Post has been editedalex_bee - 09.06.16, 19:01 |
Message#8 23.05.16, 23:04 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | If someone tried to get Root, write down what methods do not give exactly the result. This is also useful to know. For those who want to experiment, you can pay attention to: Link to video 2. Devices on the same chip, discussed onsavagemessiahzine.com: 3. Teclast X70R on xda-developers: Teclast X70R - C7F9 - Tablet - Android 5.1.1 - Intel SoFIA Atom X3-C3230 http: //forum.xda-devel...android-5-1-1-t3278453 Root Teclast X70R instructions: http: //forum.xda-devel...=64710997&postcount=34 4. Post has been editedalex_bee - 06.06.16, 18:15 |
Message#9 28.05.16, 00:11 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | Get rootfailedwith help: The list is updated 1. com.kingoapp.root_3.1-31.apk- Kingo Root. 2. NewKingrootV4.62_C133_B238_office_release_2015_12_25_105203.apk- KingRoot. 3. NewKingrootV4.90_C141_B261_office_release_2016_04_19_105003.apk- KingRoot. 4. KingRoot-4.9.2_20160513.apk- KingRoot. 5. android_root1.4.5.2663.exe- Kingo Root (PC version). I tried on Windows 7 maximum 32-bit and Windows 10 SL 64-bit. Without demand installs application of questionable utility KingoSuper Battery 6. KingRootSetup_v3.1.0.1125_105002.exe- KingRoot (PC version). Windows 7 maximum 32-bit. Without demand setsKrHelper4Pc- Android Informer. 7. 360ROOT_7.1.6.apk- 360 Root. 8. PermRoot v.6.3.3.apk- 360 Root (never started after installation) 9. Ding + Dong + Root + [By + Nellso] .apk- DingDong Root1.3.18(it did not start at all after installation). 10. Kingo.android.root_1.4.8.2793.exe- Kingo Root (PC version). Windows XP 32-bit. Without demand sets already3 applicationsof dubious utility. 11. UnlockRoot Pro4.12- (PC version). 12. NewKingrootV4.9.6_C151_B321_en_release_2016_09_18_105203.apk- KingRoot. 13. IRooT v3.2.4(EN) .apk- Romaster SU (Shouquan). 14. Permroot7.3.0.apk- 360 Root (interface in Chinese). 15. RootDashi_v5.2.1.apk- C800 insides determines howRockchip(interface in Chinese). 16. KingoRoot_3.3.apk- Kingo Root. Error code:0x19C98A(installation of applications of doubtful utility can be disabled by unchecking the box). 17. VRoot_1.8.8.20627_cid1015_923c8190.exe- he's IRooT (PC version). Post has been editedalex_bee - 16.10.16, 13:16 |
Message#10 01.06.16, 00:34 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | Who knows how to get rid of the window in the figure below that appears when you restart? It occurs, for example, if the SIM card of the Ukrainian operator is installed and the system language is "Russian". Install the "Ukrainian" language of the system, if you click "OK". The text in the notification states that it seems that the appearance of this window can be turned off in the "Language Settings", but I did not find anything like that there. Below, who needs the native drivers from the firmware from the off-site forFlashusb. The Windows version is not specified, but they got up on XP (10-ku too). AndIntel® USB Driver for Android Devices. IntelAndroidDrvSetup1.5.0 - recommended for Windows XP. IntelAndroidDrvSetup1.10.0 - the newest (recommended for Windows 10). Attached files FlashUSB_Driver_1_0_1_1.rar(520.18 KB) IntelAndroidDrvSetup1.5.0.zip(8.86 MB) IntelAndroidDrvSetup1.10.0.zip(8.9 MB) Post has been editedalex_bee - 26.06.16, 23:50 |
Message#11 04.06.16, 15:12 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | Preface guess: Since the Teclast X70R system is also on a chip (SoC) with Intel Atom x3-C3230 (SoFIA), it can be assumed that the method of obtaining Root rights to the Nomi C08000 is similar. Below is an exemplary translation of instructions for obtaining Root-rights to Teclast X70R with xda-developers: Instruction A WARNING More information in the fileteclast-x70r-c7f9-info-root.pdf. Before proceeding, read all the steps and prepare (download) the files. Extract the entire contents of the files (transfer the files) to the same directory as the ADB. Also copy fileBETA-SuperSU-v2.52.zipto your phone or micro sd card. 1. Enable USB debugging To do this in Tablet Settings go toDevice info. Click 7 times on the build number. Developer options will be available. EnableUSB debugging. Disable also optionChecking applications via USB. Connect your device using USB to your computer. 2. Unlock bootloader Run the command line (cmd) on behalf of the Administrator in the place where you extracted the files and the ADB is located. adb reboot fastboot When the tablet goes into FastBoot (the screen goes dark), enter: fastboot oem unlock fastboot oem unlock confirm Only if there is no important data on the tablet., can still do this: fastboot format userdata fastboot format cache 3. Installing Flash recovery (TWRP) Go back to FastBoot and flashrecovery-TWRP-C7F9-kernel-landscape.zip(horizontal menu layout) orrecovery-TWRP-C7F9-kernel-portrait.zip(vertical menu layout). Do not forget to unzip it before this. fastboot flash recovery recovery.img fastboot reboot 4. Getting ROOT Now that you have the opportunity to flash from recovery (TWRP): Select an optionInstalland select the file from your phone or micro SD cardBETA-SuperSU-v2.52.zip. Everything should go smoothly. Now reboot and you have Root. The following advice will most likely not suit us.(we have another loader), but I will leave it: If some kind of error occurs, depending on what kind of error it is, try to flash the unprotected (unsecured) boot.img and repeat step 4. If anyone decides to do this on the Nomi C08000, below are all the necessary files. As usual -All at your own risk. No guarantees. But the result interests, of course ... Addition: Since we have a "sweet couple": Android 5.1.1 + Intel processor, there are other ways to install Rootwithout unlocking the bootloadermost likely not, and it will still have to be done. This is where to start. You can verify that the bootloader is unlocked using the command: fastboot getvar unlocked The response received should be:unlocked:YES Must be installed: ADB Driver Installerif not yet installed Intel® USB Driver for Android Exit the fastboot menu with the command: fastboot reboot In the meantime, we have the following: One plus: it means that the drivers are installed and working correctly. If you still risk installing SuperSU and you are prompted to update the binary file, you should choosethe usual way(not cwm). Attached files adb.zip(609.92 KB) BETA-SuperSU-v2.52.zip(3.83 MB) recovery-TWRP-C7F9-kernel-landscape.zip(10.15 MB) recovery-TWRP-C7F9-kernel-portrait.zip(10.48 MB) boot-C7F9-unsecured-boot.zip(6.64 MB) teclast-x70r-c7f9-info-root.pdf(407.2 KB) Post has been editedalex_bee - 06.06.16, 18:18 |
Message#12 06.06.16, 16:53 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | Everything is also on TWRP, as above (from the same branch on Teclast X70 R), but in fls containers for firmware via FactoryTool or FlashToolE2. Factorytooland stockrecovery.fls- Nomi offsite relatives (attached). Job flasherdoes not dependfrom adb, fastboot and drivers to the tablet. The whole procedure (if you are already familiar with the program) takes only a few seconds. Only TWRP-recovery is stitched (one file, not the entire firmware).Need to unzip! In case of problems, stock recovery.fls from the office are sewn in the same way. firmware. Attached files FactoryTool_Setup_V1.25_0630.rar(1.91 MB) stock-recovery.fls.rar(8.49 MB) Updating instructions.rar(175.13 KB) recovery-TWRP-C7F9-kernel-landscape.rar(10.23 MB) recovery-TWRP-C7F9-kernel-portrait.rar(10.55 MB) Post has been editedalex_bee - 06.11.16, 11:55 |
Message#13 11.06.16, 01:07 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | On the Internet on the subject "disable language language based on sim after reboot", found the following: "This problem exists quite a long time ago and was fixed in Android Lollipop (AOSP 7)" . They fight this problem - whoever, like our version with the "Cancel" and "OK" buttons, is still not so bad against the general background. This is especially annoying travelers, sticking a sim card of the country in which they arrived in the tablet. There are rumors on xda-developer that: "The language changes only once after the first boot when you bought the device. And when you travel and use a different, local, additional SIM card, there will always be a request to select a language. " "If you do Format (Factory reset) and attach a local sim card to your mobile phone, a new" default language "will be formed. The phone will switch to it immediately after a reboot, as now it is selected as the “default language”. This language will remain in place after a reboot. " But how to completely disable this "change language based on sim" and even without root-rights - the answer was never found. Post has been editedalex_bee - 11.06.16, 01:07 |
Message#14 26.06.16, 13:29 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 175 Check in: 07.09.08 Reputation: 13 | Thank you all for the topic! Thus, it turned out to unlock the bootloader, install recovery (TWRP) after slapping SuperSu Pro (got root) |
Message#15 26.06.16, 18:53 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | Thank you all for the topic! Thus, it turned out to unlock the bootloader, install recovery (TWRP) after slapping SuperSu Pro (got root) Yes, I'm here, as it were, quietly talking with myself;) I spread everything that I "dug up" on our little animal or somehow relate to it. I would like to clarify: what exactly is the sequence of actions for installing TWRP and getting the root data by you? 1 - with unlocking the bootloader? or 2 - firmware via FactoryTool? |
Message#16 26.06.16, 19:21 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | Settings ->Batteryenable checkboxBattery percentage Settings ->Screenshotsetting ->enable checkboxShow the screenshot button in the statusbar With vibra positionsdcardat Settings ->Screenshotsetting ->Set the location of screenshot storage Screenshots will be saved on the external sd card in the folder "0" Post has been editedalex_bee - 26.06.16, 19:54 |
Message#17 27.06.16, 14:04 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 175 Check in: 07.09.08 Reputation: 13 | 1. Unlocking the bootloader 2. Firmware recovery via FactoryTool Posted on 06/27/2016 at 2:06 PM: I just can not shove xposed, it turns out a bootlap |
Message#18 27.06.16, 21:33 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | And the availability of full Root access was checked usingRoot checker ? PS Installed so? ® Xposed (Post DIMA @ 1977 # 40515884) Post has been editedalex_bee - 27.06.16, 21:57 |
Message#19 28.06.16, 13:52 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 175 Check in: 07.09.08 Reputation: 13 | I tried through TWRP And under the link Xposed (Post DIMA @ 1977 # 40515884) I am confused that there seems to be for Android 5.0 |
Message#20 28.06.16, 14:18 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 175 Check in: 07.09.08 Reputation: 13 | Do not roll the bootlap! need for 5.1.1 |
Message#21 29.06.16, 02:16 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 783 Check in: 17.12.11 Reputation: 56 | I looked through the branches with similar architecture (x86, Intel Atom x3-C3230) and Lollipop on board. Basically: "I have a brick after installation "and" tried to install - writes that the framework is not supported ". Only one post met with a conditionally positive result: Asus ZenPad C 7.0 (Z170CG) - Discussion (Post EVTEEV2007 # 46993505) Post has been editedalex_bee - 29.06.16, 02:16 |
mobile version | Now: 05/19/19, 06:57 |