[X]Assistant

[Hebckuu-koba]

HomTom HT3 Pro - Firmware
HomTom HT3 Pro
Description | Discussion пїЅ | Purchase пїЅ | Development of kernels and firmware for Homtom HT3 Pro and HT7 Pro пїЅ | Firmware пїЅ

Mini FAQ

Mini FAQ

Drivers and Utilities

MTK_drivers
SP_Flash_Tool_v5.1528.00
SP_Flash_Tool v5.1616.00.000
Utility for unpacking / packing boot.img or recovery.img under WINDOWS and Linux.

Firmware

Official firmware

For 1 revision

GF20_HT3Pro_XP_VC_V1.0.5_user_20161105-11_37_06
1.1.3 backup from TWRP
MODDED-XP_VC_V1.0.5_user_20161105
GF20_HT3Pro_V1.1.2_user_20160427-23_35_53 for Flash Tool
GF20_HT3Pro_V1.0.9_user_20160420 for Flash Tool
GF20_HT3Pro_V1.0.6_user_20160409-16_21_31 for the Flash Tool

For 2 revision

GF20_HT3Pro_XP_VC_V1.0.5_user_20161105-11_37_06
v1.0.3 for sp flash tool

For revision 3

GF20_HT3Pro_XP_VC_V1.1.0_user_20170807-09_46_21
Firmware 1.0.8 "third" revision

Unofficial firmware

For 1 revision

Reassembled 1.1.3 with chips from different firmware
Custom (unofficial) firmware for twrp recovery from qus1
Custom (unofficial) VERSION LITE firmware for twrp cubot_X16_twrp_lite recovery from S-h-u-r-i-k
Vibe UI for HomTom HT3 PRO
Resurrection-Remix_5.5.9_HT3 PRO
LenovoVibe_HT3Pro
AICP10_HT3Pro
TipsyOS_HT3Pro
HT7Pro_port_for_HT3Pro
ResurrectionRemix-N-v5.8.0 build based on cm14.1 android 7.1.1
cm14.1 android 7.1
CUBOT X17S
Custom firmware from the Germans Mirror on Ya.Disk
MIUI_9 v7.8.30 Ht3 Pro (revision 1) (not slave. Camera)

For 2 revision

Custom (unofficial) firmware for the twrp recovery from qus1 under the spoiler 1-2-3 patch for revision 2

Universal

Flyme 6 (6.7.6.27) based on 5.1.1 for HomTom HT3PRO
MIUI 8 (7.6.8) based on 5.0.2 for "three" revisions
CyanogenMod 12.1

Instructions

Audit Definition - Revision and Display Supplement
Repair IMEI
How to install recovery without a PC
Firmware Installation Instructions
Installing firmware with custom recovery
How to enter Fastboot or Recovery

Root and Recovery

Root

The way to get Root through recovery
The way to get Root through KingRoot
Replacing KingRoot with regular Root and SuperSU update

Recovery

TWRP 3.0.2fromjemmini
TWRP_HT3PRO_105
CWM Recovery
Recovery 3 revision
Stock recovery

Venso Isprit U50 LTE Firmware

Firmware (under FT) clone of our hamster Isprit_U50_LTE_V1.1.1 (Venso)
GF20_HT3Pro_A_XP_VC_N40_V1.0.5_user_20161107-11_07_43

miscellanea

Comparing 1.0.5 firmware
Custom core from ANDR7E
Fix problem "leds wakelock"
XTweaks 2.1 By Y @ sh
System.img content from firmwareGF20_HT3Pro_V1.0.9

Screenshots

Screenshots

Topics CuratorHebckuu-koba

Post has been editedsnekt - 13.04.18, 18:29

Reason for editing: theme navigator

[iuru]

Friends and how to install TWRP 3.0.2, if not in the scrap in more detail. Just like custom?

Post has been editediuru - 01.05.16, 12:17

[burovikk26]

[email protected], 12:04

But how to install TWRP 3.0.2, if not in the scrap in more detail.

in the same way as CWM:HomTom HT3 Pro - Firmware (OS 5.x) (Post zhekabel # 49252648)

You can also try this way:LG Leon - Official firmware (Post burovikk26 # 45736520)

If the method works, write about the result.

Post has been editedburovikk26 - 01.05.16, 12:18

[burovikk26]

пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ download

(disassembly / assembly of boot.img and recovery.img)

Carliv Image Kitchen for Android
Checked, parses and assembles without problems.

[iuru]

burovikk26,

[email protected], 13:13

In the same way as CWM: HomTom HT3 Pro - Firmware (OS 5.x) (Post zhekabel # 49252648)

You can also try this way: LG Leon - Official firmware (Post burovikk26 # 45736520)

If the method works, write about the result.

I put it like a custom one, I did not try LG Leon - Official firmware (Post by burovikk26 # 45736520), it’s just a matter of time, and don’t want to arrange tambourines.

[burovikk26]

[email protected], 15:40

Yes and no desire to arrange tambourines.

what tambourines? MTK processor, so this method will work.

[iuru]

burovikk26,

[email protected], 16:49

what tambourines? MTK processor, so this method will work.

Yes, I have no doubt, I have another problem now, emails are not displayed in MTKdroidTools, everywhere there is, the radio module is on the spot, the Internet is there, the calls are on, but there is no button and the button to create a scanner file is not active, I haven’t updated the network did not fly through the air, wrote a network error, there was a 4G network, it was impossible to switch to 2G or 3G, wrote in the application com. android.phone made a mistake, tried it, now it was, in general, I wanted to give up this body, he pushed me with a dispatch of 25 days, implored, wrote that I was the most favorite buyer, now he doesn’t respond, poop.

Post has been editediuru - 02.05.16, 00:09

[burovikk26]

[email protected], 00:04

no emails are displayed

on command * # 06 # displayed? If yes, then there is nothing to worry about.

[Denick63]

[email protected], 12:13

The way works through ToolHero.

[burovikk26]

Denick63 @ 05/02/16 00:12

works through ToolHero.

So it should work on the Mobileuncle MTK Tools.

[Denick63]

Through Mobileuncle did not work. Instead of firmware, the body is transferred to the recovery mode (after a corresponding request).

[iuru]

burovikk26,

Burovikk26 @ 05/02/2016, 01:08

on command * # 06 # displayed? If yes, then there is nothing to worry about.

Before it is displayed, the fact of the matter is that it is displayed everywhere and everything works, but why is there no button in the program and the button to create a stater file is inactive? Previously, all the drivers are correct.

Post has been editediuru - 02.05.16, 12:38

[burovikk26]

iuru @ 05/02/2016, 12:38

why the program does not have and the button to create a stater file is inactive.

You better attach the screen, so it will be easier to understand what the error is.

[iuru]

burovikk26,

Burovikk26 @ 05/02/2016, 13:42

You better attach the screen, so it will be easier to understand what the error is.

Here you are screenshots.

[burovikk26]

iuru @ 05/02/2016, 12:38

But why is there no button in the program to create a stater file?

We read about the processor HomTom HT3 Pro: "MTK6735P, 4 cores,64 bit"
Now we read in the program description:

#[email protected], 02:58

Does not work with 64-bitdevice processors.

Post has been editedburovikk26 - 02.05.16, 15:22

[iuru]

burovikk26,

Burovikk26 @ 05/02/2016, 16:21

We read about the processor HomTom HT3 Pro: "MTK6735P, 4 cores, 64 bit"
Now we read in the program description:
#[email protected], 02:58
Does not work with 64-bit device processors.

And what do you propose to do the same and VKWorld VK700X

[burovikk26]

[email protected], 15:33

And what do you propose to do

for what? What is your goal? What do you want to do?

[iuru]

burovikk26,

Burovikk26 @ 05/02/2016, 16:39

for what? What is your goal? What do you want to do?

First I want to understand (understand) for the future and I'm just interested. There still writes:

I click the root as a result, the green bar runs to half and the error says that the connection with the body is lost, the program will close. After this, the body has to be rebooted to work.

Post has been editediuru - 02.05.16, 16:06

[burovikk26]

[email protected], 15:50

There still writes:

Do not reinvent the wheel and do not clog your head. Do you have root rights? So let them work. I have two different smarts with such a processor and full root rights, the program also shows up in the same way ...

[Hebckuu-koba]

To enter Fastboot Mode, Recovery Mode:
Clamp "Volume +"and"On off", after the selection of the boot menu appears, release.
To select useVolume +". Confirm the choice."Volume -".
When selecting Recovery Mode:
A broken Android appears with the lid open and a red exclamation mark, and the words "No Team." Hold down the "On off"andPRESS"Volume +", Recovery menu opens, release"On off". Management"Volume +"- up,"Volume-" - way down, "On off"is a choice.

Post has been editedHebckuu-koba - 02.05.16, 20:38

[burovikk26]

Let's start collecting FAQ on our device. Who has suggestions / clarifications on filling - you are welcome in QMS.
The post will be updated as information accumulates.

Mini FAQ

Question answer

- How to find out the version of the installed firmware?
Go to"Settings" - "About phone"- In line"Build Number"The version of the installed firmware is indicated.

- Are there official firmware for HomTom HT3 Pro?
Yes there is. In the cap under the spoiler"Firmware" - "Official firmware"

- Are there any unofficial firmware for HomTom HT3 Pro?
Yes there is. In the cap under the spoiler"Firmware" - "Informal firmware"

- What is "Recovery"?
This is the bootloader mode, created to be able to restore the device in case of damage to the firmware, etc.

- How to enter the "Fastboot" or "Recovery" mode?
One of the methods

- Is it possible to restore the phone performance after unsuccessful actions or failure?
Yes you can. There are several ways:
пїЅ Hard resetin recovery mode
пїЅ Reset to factory conditionin the phone settings
пїЅ Restore backupvia TWRP / CWM
пїЅ Reinstalling factory firmware

- What is CWM and TWRP?
ClockworkMod recovery (CWM)andTeamWin recovery (TWRP)- Modified unofficial recovery, which are available for most devices running Android. Possess much more features than stock recovery.ClockworkMod recovery (CWM) FAQ TeamWin FAQ (TWRP)

- What are Root-rights and what are they for?
This is an administrator account giving you unlimited control over the system. One should be aware that even obtaining Root rights is an invalidating guarantee, especially if after the changes made in the firmware it is not possible to roll back the system to its original state. Before going to the service, in order that you would not be denied a Root access guarantee, you will need to delete it.Questions beginner root user

- Is it possible to get Root-rights?
Yes there is. Answer under the spoiler"Root, Recovery"

- Which applications can be safely removed?
The most complete information is collected here:Uninstalling Android system apps

- How to enable USB debugging?
Go to menu"Settings" - "Developer Options". In the upper right corner, slide to enable the slider and click"OK"in the message that appears. Tick ​​the box"USB debugging".

- There is no item "Developer options" in the "Settings" menu
Go to"Settings" - "About phone"- click7line times"Build Number"until a popup message appears"You became a developer". In the "Settings" menu, a new item "Developer Options" will appear.

- How to enter the MTK engineering menu?
The command to enter the engineering menu*#*#3646633#*#*

- How to view information about IMEI?
The command to view information about IMEI (international mobile equipment identifier):*#06#