4 pagesV  < 1 2 3 4 > »  
 
REPLY
> TP-Link WDR3500 - Discussion | [wifirouter]
alex @ rya
Message#1
08.02.17, 14:45
WiedЕєmin
*********
[offline]

Group: Curators
Messages 10009
Check in: 04.09.13
Xiaomi Redmi Note 3 Pro Prime

Reputation:-  3397  +

TP-Link WDR3500 - Discussion


A photo:
Attached Image

Attached Image

Description:
Simultaneous connections — up to 300 Mbit / s at 2.4 GHz and up to 300 Mbit / s at 5 GHz allow you to achieve a total bandwidth of 600 Mbit / s
A USB port allows users to easily share a printer and files on a local network or over the Internet (Learn more)
Turning on or off the wireless broadcast is very simple with a switch on the router
IGMP Proxy Support for IPTV Multicast
Specifications:
Interface 4 LAN ports 10/100 Mbps
1 10/100 Mbps WAN port
1 USB 2.0 port
Buttons WPS / Reset Button (Reset Settings)
Enable / Disable Wireless Broadcast
Power on / off
Antenna 2 external removable dual-band antennas (RP-SMA connector)
External power supply 12 V DC. current / 1 A
Dimensions (WxLxH) 225 x 140 x 32.5 mm
PARAMETERS OF WIRELESS MODULE
IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Wireless Network Standards
The frequency range (reception and transmission) 2400-2483.5 MHz
5150-5350 MHz
5650-5725 MHz
Transfer speed 5 GHz: up to 300 Mbps
2.4 GHz: up to 300 Mbps
Sensitivity (reception) 270 Mbps 2.4 GHz: -70 dBm
195 Mbps 2.4 GHz: -71 dBm
130 Mbps 2.4 GHz: -74 dBm
54 Mbps 2.4 GHz: -79 dBm
6 Mbps 2.4 GHz: -94 dBm
270 Mbps 5 GHz: -67 dBm
195 Mbps 5 GHz: -70 dBm
130 Mbps 5 GHz: -73 dBm
54 Mbps 5 GHz: -79 dBm
6 Mbps 5 GHz: -92 dBm
EIRP (Wireless Power)<20 dBm or<100 mW
Wireless Features Enable / Disable Wireless Broadcast, WDS Bridge, WMM, Wireless Statistics
Wireless Security 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK Encryption
Wireless Network 1 2.4 GHz Guest Network
1 guest 5 GHz network
Guest network 2.4GHz guest network Г— 1
5GHz guest network Г— 1
Useful links:


There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links, or through QMS.

Post has been editedShoore - 22.08.18, 22:55
vovka_r
Message#22
23.03.18, 13:06
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 128
Check in: 02.02.09

Reputation:-  33  +

The cure for signal failure at 2.4 GHz: Gargoyle firmware. I read Tp-Link on the forum that it only helps people from a heap of tried ones.
And there is no version for the WDR3500, but there is a Gargoyle 1.6.2.2 (r42647) ported from the obsy from the Poles, it seems taken from the WDR3600. It is searched hard, therefore, I attach:
Attached filegargoyle.zip(6.32 MB)

Sew through the web interface. Do not forget to unzip before flashing. Connect for the first time after the firmware turned out only by cable, the radio could not find the key. The default address is 192.168.1.1, admin passwordpassword. After logging in, switch the language from Polish to English (available in the firmware), and put another key on WiFi.

Upd: at the moment after the firmware uptime a week, there was no signal failure at 2.4. Before that was three times a day.

Post has been editedvovka_r - 29.03.18, 17:01
dinamito
Message#23
28.03.18, 03:41
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1346
Check in: 02.12.10
Acer z530

Reputation:-  72  +

Does everyone have a hardware version 1?


--------------------
vovka_r
Message#24
29.03.18, 16:59
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 128
Check in: 02.02.09

Reputation:-  33  +

dinamito @ 03/28/18, 06:41*
Does everyone have a hardware version 1?

If you believe the official firmware on the manufacturer's website, because for other versions of the firmware is not, then only the first.
iroo
Message#25
07.04.18, 21:07
Visitor
**
[offline]

Group: Active users
Messages 24
Check in: 19.02.09
Xiaomi Mi A1 4/64

Reputation:-  -1  +

Regarding the firmware Gargoyle - here I found the latest for our devicehttp://dl.eko.one.pl/f...howFirmwareTable=false
Gargoyle PL, stabilne 1.10.0.3
Schnitzel24
Message#26
21.05.18, 22:42
a guest
*
[offline]

Group: Users
Messages 2
Check in: 05.07.15

Reputation:-  0  +

Get out. I stitched Gargoyle, quickly set up a connection in the web interface, saved it and the router started issuing initialization, replaced by an unidentified network. And so in a circle. I tried to reflash through tftpd. The firmware went through, but the result did not change - probably it was sewed with the wrong firmware (I was not sure that it was exactly without the boot). Throw the firmware without boot or any other way to revive the brick.
Herzz
Message#27
22.05.18, 07:51
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 3794
Check in: 10.01.10

Reputation:-  345  +

Schnitzel24 @ 05.21.18, 22:42*
Throw the firmware without boot

Hold on

Attached files

Attached filewdr3500v1_en_3_14_3_up (150518) .zip(5.95 MB)
Schnitzel24
Message#28
27.05.18, 23:54
a guest
*
[offline]

Group: Users
Messages 2
Check in: 05.07.15

Reputation:-  0  +

Thanks, helped: thank_you:
ruckog
Message#29
07.07.18, 11:14
I am a saint ... 0 :-)
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 400
Check in: 18.04.11
Apple iPhone X

Reputation:-  30  +

Guys, like all of them fall off inet 2.4, you have to restart the router. I have never reflashed the router, can anyone give a detailed guide on how to put a gargoyle and which one so that the inet stops falling off? Thanks friends))


--------------------
LOCO Yaroslavl R.I.P. we grieve (...
Den'Masterskih
Message#30
13.08.18, 12:23
a guest
*
[offline]

Group: Users
Messages 2
Check in: 22.06.16

Reputation:-  0  +

We are friends with TP-Link WDR3500 and 4G modem Huawei E392 (From MTS).
I managed to make friends with OpenWrt
OpenWRT firmware:
  1. Download Lede Luci
  2. Fill through the web interface, go to the new firmware 192.168.1.1
  3. Go System =>Sofware and install packages:
    • luci-proto-3g;
    • kmod-usb-serial-option;
    • usb modeswitch;
    • kmod-usb-serial-ipw.

  4. Save, reboot, go Network =>Interfaces and create a van port, specify the UMTS \ 3G connection type, enter the APN, select the device (in the case of Huawei it works on dev \ ttyUSB0)
  5. Save again, click connect.


I attach a customized dump for the firmware by the programmerOpenWRT Luci Dump
Dump native firmwareTP-Link WDR3500
Just tried the Polish firmware "Gargoyle". The actions are the same as with Luci, but you should first set up a wired connection, reload the language pack and the packages for us.Backup settings Gargoyles

Post has been editedShoore - 22.08.18, 22:54
Reason for editing: corrected link
dsmat
Message#31
06.09.18, 14:52
User
****
[online]

Group: Friendssavagemessiahzine.com
Messages 64
Check in: 01.02.12
Samsung Galaxy Note 4 SM-N910C

Reputation:-  0  +

ICE! Tell me what bonuses gives the firmware "gargoyle" compared with the factory? 2.4 GHz did not fall off even once.
bulgakov_vasilii
Message#32
07.09.18, 11:17
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1371
Check in: 26.03.12
Lenovo S850

Reputation:-  67  +

On the stock firmware, the device regularly stuck on the distribution of Wi-Fi 2.4. No firmware and methods for firmware of the device (web-muzzle, through the server, via USB-TTL adapter) helped me, I'm talking about stock firmware. Now the device has worked for almost 3 years without a glitch. On the same stock firmware. What is the difference:
crashes / hangs were on the provider Starnet (Chisinau, Moldova). At 841 TP-Link, the same wire, the same cable, there are no failures for years.
Three years 4300 connected in St. Petersburg, MTS prov. There are no failures. But the type of connection is different.
That is, the stock is rather “sensitive” to the connection details via the provider's wire. In my case - 146%.


--------------------
Lasst, die ihr eingeht, jede Hoffnung fahren ...
tigrgrom
Message#33
08.09.18, 16:42
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 672
Check in: 16.05.11
Honor 8 pro

Reputation:-  13  +

Guys, what kind of Gargoyle from the laid out here to sew?
shtaketoff
Message#34
27.10.18, 21:20
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 296
Check in: 03.01.13
Xiaomi Mi 4c Prime

Reputation:-  4  +

tell me exactly which firmware solves the problem with the falling 2.4 network
I do not want to tinker the device
tigrgrom
Message#35
27.10.18, 22:40
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 672
Check in: 16.05.11
Honor 8 pro

Reputation:-  13  +

* shtaketoffI waited for an answer for almost 2 months and never received.
redlaen
Message#36
05.01.19, 21:23
Visitor
**
[offline]

Group: Active users
Messages 17
Check in: 24.03.17

Reputation:-  1  +

Good day! I put gargoly everything works stably, but I could not configure the iptv prefix, it receives the Internet, but the TV does not work, who could tell me. like che. I will add that I tried to set the rules igmpproxy, but it turned out that I don’t understand it.

Post has been editedredlaen - 05.01.19, 21:26
valeramalko
Message#37
05.01.19, 21:27
Veteran
********
[online]

Group: Friendssavagemessiahzine.com
Messages 1758
Check in: 01.05.14
Xiaomi Mi Max Prime

Reputation:-  219  +

* redlaen,
take a lookthis.
depends on how the provider provides iptv.


--------------------
Xiaomi Mi Max
Keenetic Giga (KN-1010), Keenetic Extra, Xiaomi Mi-router 3, Xiaomi Mi-MINI, SNR-CPE-W4N rev.M, TP-Link WDR3500, Smart Box Beeline N300 (openwrt), WT3020 (Padavan)
redlaen
Message#38
05.01.19, 22:26
Visitor
**
[offline]

Group: Active users
Messages 17
Check in: 24.03.17

Reputation:-  1  +

Duck here and did this and did not work.
kisvla
Message#39
19.01.19, 21:25
User
****
[online]

Group: Friendssavagemessiahzine.com
Messages 82
Check in: 05.05.13

Reputation:-  1  +

Hi, how to make the E3372s hilink modem work on the n600 router
edikkk
Message#40
03.02.19, 23:53
Visitor
**
[offline]

Group: Active users
Messages 20
Check in: 17.11.07
Motorola Droid Maxx

Reputation:-  0  +

Help out how to make a Gargoyle reset? I do not remember the password
valeramalko
Message#41
04.02.19, 17:22
Veteran
********
[online]

Group: Friendssavagemessiahzine.com
Messages 1758
Check in: 01.05.14
Xiaomi Mi Max Prime

Reputation:-  219  +

Edikkk @ 02/04/19, 01:53*
how to reset gargoyle?

as on Gargoyle I don’t know for sure, but on openwrt like this:
manually register ip 192.168.1.2, gateway 192.168.1.1 on the network card
turn off the router
hold the reset and turn on the router, do not release the reset until the status indicator (gear) blinks quickly.
connect to the router via telnet or ssh (depends on the firmware version, on the early telnet, on the later -ssh)
enter the command to change the password from the router
passwd

then enter new password, confirm password
or to reset the settings
mtd -r erase rootfs_data


Post has been editedvaleramalko - 04.02.19, 17:22


--------------------
Xiaomi Mi Max
Keenetic Giga (KN-1010), Keenetic Extra, Xiaomi Mi-router 3, Xiaomi Mi-MINI, SNR-CPE-W4N rev.M, TP-Link WDR3500, Smart Box Beeline N300 (openwrt), WT3020 (Padavan)

4 pagesV  < 1 2 3 4 > » 


 mobile version    Now: 04/18/19, 15:15