Discussion camera Xiaomi Redmi Note 3 Pro
and
for posting evaluation
Alexey070315, Solved the problem
Xiaomi Redmi Note 3 Pro - MIUI Firmware (OS 5.x - 6.x) (Post Brecnh3 # 61622915)
pastuh2 , 2Apy + past
Nobody examples of a flow with a disconnected noise on the global label or a developer has not thrown off
Stoke Nitrogen, evening, artificial lighting, Cotton helped at work (-:
Later kin daytime from the street
Later kin daytime from the street
 |
Ironick_nv @ 05/22/17, 22:58
What a chamber can do raw
SnapCameraSnap Camera HDR (TheCh Post # 17952315)
IroNick_nv , I advise the past - a simple chamber with Ravid, turning off the noise and a pleasant interface) As advisedkrakatuk608 , Snapsid works perfectly with Ravka
Post has been editedInter90 - 23.05.17, 00:35
Ironick_nv @ 05/22/2017, 23:42
Somehow dofiga, he takes this DNG. Or RAW would occupy the same?!
So DNG is Raw ...
Activating advanced Snapdragon Camera settings on custom firmware
To enable hidden capabilities of the camera, it takes several times to tap"Maximum brightness" After activation, a message appears on the inclusion of the enhanced camera parameters (see Scripts under the spoiler). Activated Auto HDR, zero shutter delay, RAW, CAMERA2API, Manual white balance adjustment / exposure / focusing and much more( TNR / CDS mode etc.). Some parameters are interconnected and will not be active, to activate them should be deactivated by the dependent parameter (by the method of samples, look for dependencies or cm. Screenshots there are almost everything in working condition). Camera2API works crookedly (confused by the proportions of sizes in the chamber), but there is enough opportunities in Hal1 mode, I think you can unscrew and get a snapshot no worse than the MIUI camera, and maybe even better. I hope that the hidden settings will be activated for all devices in subsequent NOS builds by default. Good pictures of all
Screenshots with Nitrogenos.
 |
 |
 |
 |
 |
 |
 |
Post has been editeddorel2005 - 06.07.17, 07:05
Good day. I have not laid out my photos for a long time.
Removed on Proshot, Lumiocam, and the usual stock. Snapseed processing
Post has been editedIvan_Iznailov - 25.05.17, 19:05
Removed on Proshot, Lumiocam, and the usual stock. Snapseed processing
 |
 |
 |
 |
 |
 |
 |
Post has been editedIvan_Iznailov - 25.05.17, 19:05
In fact, settings in applications are not strongly affected. It is much more important to find an interesting frame. Magic is going on in snapseed))
Here are app settings:
Comparison of processed and not processed photos:
Here are app settings:
Lumio:
ProShot:
Stock:
 |
 |
ProShot:
 |
Stock:
 |
 |
 |
Comparison of processed and not processed photos:
Before:
After:
 |
After:
 |
Before:
After:
 |
After:
 |
Before:
After:
 |
After:
 |
Before:
After:
 |
After:
 |
 |
Friends. Please tell me how in ProjectCamera V 1.4 include Camera 2Api? The camera at a low weight removes really good even on the machine. But I can not find the inclusion I can find)). And I will also be grateful for the link to the Camera 2Api archive, and then they say that there are many of them and everyone has their own changes. Now I use the archive from the header. Firmware 8.1.4.0 Glob. Stub. Kenzo
Post has been editedAbrosov2012 - 26.05.17, 12:53
Post has been editedAbrosov2012 - 26.05.17, 12:53
Denis_Koleov @ 05/26/17, 05:08
Serjo87, in the topic of the discussion of the camera would add it, I think many will like it) here they did not even notice)
Serjo87 @ 05/25/17, 15:39
Activating advanced Snapdragon Camera settings on custom firmware
To enable hidden capabilities of the camera, it takes several times to tap"Maximum brightness" After activation, a message appears on the inclusion of the enhanced camera parameters (see Scripts under the spoiler). Activated Auto HDR, zero shutter delay, RAW, CAMERA2API, Manual white balance adjustment / exposure / focusing and much more( TNR / CDS mode etc.). Some parameters are interconnected and will not be active, to activate them should be deactivated by the dependent parameter (by the method of samples, look for dependencies or cm. Screenshots there are almost everything in working condition). Camera2API works crookedly (confused by the proportions of sizes in the chamber), but there is enough opportunities in Hal1 mode, I think you can unscrew and get a snapshot no worse than the MIUI camera, and maybe even better. I hope that the hidden settings will be activated for all devices in subsequent NOS builds by default. Good pictures of all
Screenshots with Nitrogenos.
 |
 |
 |
 |
 |
 |
 |
PS: Screenshots in the quoted post under the spoiler are.
Post has been editedSerjo87 - 26.05.17, 09:15
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement