MiWiFi 3 | Xiaomi Mi-router 3 - Discussion | [wifirouter]
MiWiFi 3 | Xiaomi Mi-router 3 - Discussion
Official page | MiWiFi | Xiaomi Mi-router пїЅ | Xiaomi MiWiFi nano пїЅ | Xiaomi MiWiFi mini пїЅ | Xiaomi MiWiFi (client for Android)пїЅ | Xiaomi club пїЅ
Need to download different versions of the script for different Ubuntu
Attention!When building, installing and configuring, consider the following:
• The Chinese have messed up with gainbecause of what RSSI for WI-FI 5 GHz is incorrectly displayedcured, but the EEPROM patch is recommended to roll through the script, since the jamb with the gain has not gone away, the patch increasessensitivityreception at the router and installed after flashing;
• NAND FLASH driver is unstable, pay attention to it! If you only want to purchase this router for use on custom firmware, then it is recommended to lean towards MI-MINI. The driver patch does not apply to the RT-N56U repository.
пїЅ I recommend to get acquainted with the nuances of the firmware.
Log changes in the firmware
Prometheus script and firmware distribution terms :
• You can not use the script to build the firmware with proprietary modules;
• It is strictly forbidden to distribute mods, patches and parts of the code that interfere with the above conditions.
When flashing, check the selected config !!! Must be MI-3 !!!
You can get access via SSH only on one version of the firmwarehere. With the firmware there is a small chance of damaging the router, you need to have a UART console in walking distance, this is just a recommendation. It costs $ 1.
A collection of instructions for the firmware ASUS (Padavan) is the post below
Basic instructions:
VideoASUS Padavan installation instructions
VideoInstructions for building firmware on Windows 10 (built-in subsystem)
Instructions with pictures
Instructions for recovery via UART console
Rollback to run through the script
Setting up the router on the padavan firmware as a repeater
Badam problem example and script reaction
Configuring Zaborona VPN on Padavan
Installing Samba 4 with Entware on Padavan firmware
Post has been editedRamsteiner - Yesterday, 20:05
Official page | MiWiFi | Xiaomi Mi-router пїЅ | Xiaomi MiWiFi nano пїЅ | Xiaomi MiWiFi mini пїЅ | Xiaomi MiWiFi (client for Android)пїЅ | Xiaomi club пїЅ
One more photo
 |
Specifications
The main differences from the MINI version are highlighted in red. There are no other differences and the router is technically no different from its predecessor.
- CPU MT7620A 580MHz;
- ROM: 128MB SLC Nand Flash ;
- RAM: 128MB DDR2;
- No built-in HDD (you can connect via USB external);
- 2.4 Ghz WiFi 2x2 (up to 300 Mbps);
- 5 Ghz WiFi 2x2 (up to 867 Mbit / s);
- WAN (up to 100 Mbps);
- LAN x2 (up to 100 Mbps);
- External non-directional antennas - 4 pcs.
Firmware
STOK (CN)
Padavan
Need to download different versions of the script for different Ubuntu
Attention!When building, installing and configuring, consider the following:
• The Chinese have messed up with gain
• NAND FLASH driver is unstable, pay attention to it! If you only want to purchase this router for use on custom firmware, then it is recommended to lean towards MI-MINI. The driver patch does not apply to the RT-N56U repository.
пїЅ I recommend to get acquainted with the nuances of the firmware.
Log changes in the firmware
Prometheus script and firmware distribution terms :
• You can not use the script to build the firmware with proprietary modules;
• It is strictly forbidden to distribute mods, patches and parts of the code that interfere with the above conditions.
When flashing, check the selected config !!! Must be MI-3 !!!
You can get access via SSH only on one version of the firmwarehere. With the firmware there is a small chance of damaging the router, you need to have a UART console in walking distance, this is just a recommendation. It costs $ 1.
A collection of instructions for the firmware ASUS (Padavan) is the post below
Basic instructions:
VideoASUS Padavan installation instructions
VideoInstructions for building firmware on Windows 10 (built-in subsystem)
Instructions with pictures
Instructions for recovery via UART console
Rollback to run through the script
Setting up the router on the padavan firmware as a repeater
Badam problem example and script reaction
Configuring Zaborona VPN on Padavan
Installing Samba 4 with Entware on Padavan firmware
Openwrt
Openwrt fromberoid
Moding
Reviews
Other
If your device does not see the network at a frequency of 5 GHz
Information unit in binary numbering system GOST 8.417-2002 GSI
bit2(bit) - amount of information 1 (usually used to denote the connection speed and the amount of information transmitted);
byte2,3 - amount of information 1 equal to8bit (usually used to denote the amount of data on the media).
1) The term “amount of information” is used in devices for digital processing and transmission of information, for example in digital computing (computers), to record the amount of storage devices, the amount of memory used by a computer program.
2) In accordance with the international standard IEC 60027-2, the “bit” and “byte” units are used with SI prefixes.
3) Historically, there is such a situation that the name “byte” is incorrect (instead of 1000 = 103accepted 1024 = 210) used (and use) SI prefixes: 1 Kbyte = 1024 bytes, 1 MB = 1024 Kbytes, 1 Gbytes = 1024 Mbytes, etc. At the same time, the designation Kbytes start with a capital letter unlike the lowercase letter “k” to designate a multiplier ten3.
byte2,3 - amount of information 1 equal to8bit (usually used to denote the amount of data on the media).
1) The term “amount of information” is used in devices for digital processing and transmission of information, for example in digital computing (computers), to record the amount of storage devices, the amount of memory used by a computer program.
2) In accordance with the international standard IEC 60027-2, the “bit” and “byte” units are used with SI prefixes.
3) Historically, there is such a situation that the name “byte” is incorrect (instead of 1000 = 103accepted 1024 = 210) used (and use) SI prefixes: 1 Kbyte = 1024 bytes, 1 MB = 1024 Kbytes, 1 Gbytes = 1024 Mbytes, etc. At the same time, the designation Kbytes start with a capital letter unlike the lowercase letter “k” to designate a multiplier ten3.
Problems and bugs
Previous polls
 |
Post has been editedRamsteiner - Yesterday, 20:05
For a snack:
Ad blocking via host file on a flash drive
Time machine
Running applications on GO
IPTV over WIFI
Control router via telegram
Removal of 404 error output windows (about servers not found) when installing the ad blocker script
Audio setup
Instructions in Russian for setting the firmware
Installing a network printer
Transmission Setup
Ad blocker
Ad blocking filter
Owncloud + nginx + php5-fpm + https cloud (updated 05/12/2016)
WEB interface to Aria2
How to add support for scanners in the firmware
how to add your playlist m3u
Adding TOR support
Bypassing Roskomnadzor with TOR
How to configure cron (autostart)
Skins:
All skins should be replaced at the compilation stage of the firmware, the Prometheus script supports all skins, the skin change is carried out through the admin panel of the router.
Multiskin not tied to version
Other:
USB camera connection
How to turn a WAN into a LAN
Remote control multifunction device
How to fasten entware without a flash drive
Manual SSH hacking
We fasten a bot on a telegram (read two posts)
E3372 api
Track Console Clients
How to eliminate nasty squeak
Post has been editedFreize - 10.05.17, 20:42
Ad blocking via host file on a flash drive
Time machine
Running applications on GO
IPTV over WIFI
Control router via telegram
Removal of 404 error output windows (about servers not found) when installing the ad blocker script
Audio setup
Instructions in Russian for setting the firmware
Installing a network printer
Transmission Setup
Ad blocker
Ad blocking filter
Owncloud + nginx + php5-fpm + https cloud (updated 05/12/2016)
WEB interface to Aria2
How to add support for scanners in the firmware
how to add your playlist m3u
Adding TOR support
Bypassing Roskomnadzor with TOR
How to configure cron (autostart)
Skins:
All skins should be replaced at the compilation stage of the firmware, the Prometheus script supports all skins, the skin change is carried out through the admin panel of the router.
Multiskin not tied to version
Outdated skin versions
Light skin outdated
Skin in gray tones outdated
Skin in yellow tones outdated
Skin in blue outdated
Skin in dark blue outdated
Skin in gray tones outdated
Skin in yellow tones outdated
Skin in blue outdated
Skin in dark blue outdated
Other:
USB camera connection
How to turn a WAN into a LAN
Remote control multifunction device
How to fasten entware without a flash drive
Manual SSH hacking
We fasten a bot on a telegram (read two posts)
E3372 api
Track Console Clients
How to eliminate nasty squeak
Post has been editedFreize - 10.05.17, 20:42
Reason for editing: ashPki))
Yesterday ordered. The seller promises to send before the 10th (the time for processing the order from him until April 11). The parcel should be sent by Singapore Post, which delivers to my country fairly quickly. I hope to get this router in early May.
Preordered it for $ 28 purely for interest. Any chance of getting a firmware from a padawan on this router?
Koteiko @ 04/03/2016, 11:37
Any chance of getting a firmware from a padawan on this router?
There are two ways, or someone helps us torture our little animal and we jointly make the port, or you can throw off and order a test sample.
Post has been editedFreize - 03.04.16, 12:00
Freize, I agree to do anything with my own, or to organize a fundraising for a test sample, it is possible to take another one for $ 28 and have him sent quickly. Koteiko, I can, but I don’t have any extra money, and there are already five routers at home, I’ll be salting soon. Half the costs as experimental. So, I think your enough is enough, just if there is a test, then I can then make corrections for it and check it. Only that is the difference.
The seller has sent photos of the box of this router. It is big and different from the Mini and in general from the rest of the Xiaomi products.
 |
 |
I thought to take this router instead of mini, but I see that there are practically no differences. The processor is the same as the mini. And the 100-megabit ports
Post has been editedbozander - 04.04.16, 11:09
Post has been editedbozander - 04.04.16, 11:09
bozander, If you already have a Mini, then there’s really no point in taking it. It is for those who are only going to take some Xiaomi router.
Just thinking about a new router for the house, I chose a very long time to stop at Xiaomi mini, but here I am following this link))
Can I also link where to get this miracle.
Can I also link where to get this miracle.
On the official website mi.com sales start from April 6.
Taking advantage of where I inhabit (Blagoveshchensk), I hope to be the first on the forum to borrow a piece of iron. ;)
The Chinese have already loaded a sniper, waiting for the day after tomorrow.
Taking advantage of where I inhabit (Blagoveshchensk), I hope to be the first on the forum to borrow a piece of iron. ;)
The Chinese have already loaded a sniper, waiting for the day after tomorrow.
Angry TarakaN, we wait! If possible, remove the video unpacking and fill it with YouTube. without comments, you just want to see what the box and the package bundle are.
Post has been editedThemysterious - 04.04.16, 15:35
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement