30 pagesV  < 1 2 3 4 5 6 > »  
 
THEME IS CLOSED
> DEXP Ixion ML 4.5 - Firmware
Passer777
Message#1
07.03.15, 09:55
Born in USSR
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1586
Check in: 01.11.15
Xiaomi Mi 5S 4/128

Reputation:-  165  +

DEXP Ixion ML 4.5 - Firmware
Picture
Description | Discussion | Firmware

Important information

Drivers and Utilities
The program-flasher for smart phones based on MTK
When flashing devices via SP_Flash_Tool, do not sew the filepreloaderwithout extreme necessity.


Universal drivers for MTK - Attached fileMTKUSBALLv0.6.rar(22.47 MB)

SP Flash Tool - Attached fileSP_Flash_Tool_v5.1604.00.rar(30.19 MB)

Questions about the Flash Tool can be set - here

Utility for getting temporary root rights - VRoot

Program for root, backup and create recovery on MT65 ** - MTK Droid Tools

�������� download

The best firmware are here!
Do not ask questions: What is the best firmware? What firmware will you advise? etc.
The taste and color of all the markers are different ... Everyone decides what is best for him, what you like may not please you, etc., therefore install the firmware you like the description, the screenshots, and choose the best .

All such questions will be deleted without warning!

Informal firmware.

Official firmware.


Root + Recovery

Instructions
- Instructions for transferring applications on Android 6.0 _7.1.2 firmware
-A brief history of how to restore the "brick" after a non-successful firmware via the Flash Tool
-Instructions on how to make SWAP (or the “paging file” familiar to everyone)
-Disable MTKLogger monitoring (increase autonomy and performance)
-Clean install firmware - and for an even cleaner installation, I advise you first to flash the stock with the help of the SP Flash Tool, and then after casting it.
-A small instruction on installing drivers with useful utilities
Instructions for using MTK Droid Root & Tool
Install MTK Droid Root & Tools on your computer. Installing drivers for ADB.
We connect the phone to the computer and open MTK Droid Root.
After the connection, when the phone was determined and the information about the phone appeared, click the button "Get temporary root".
If you do not receive a temporary root, you first get the root with the help of the Vroot utility (or whatever you like), then again press the button to get a temporary root.
After receiving the temporary root, go to the "root, backup, recovery" tab and press the "BACKUP" button and wait for the end of the backup firmware saving process, the process is not fast and will take some time.
At the end, click the button "Prepare blocks for FlashTall" and also wait for the end of the process.
Then click the Recovery and Boot button before ticking Use boot from the phone and wait
At the end, we agree to flash rekoveri and patched boot.
We are overloaded and rejoice in the received modrekoveri, patched buta and the received superuser.
After all the successful manipulations, we enter the recovery and click on the Backup and restore tab (scrolling with the volume buttons),
in the drop-down menu, select Backup.
At the end, we will have a backup to which we can roll back at any time.

Getting ROOT rights by the VRoot program
Any operation is performed at your own risk!
1. Download and install the VRoot program on your computer.
2. Disable antivirus programs (as needed).
And go to your PC on the C: / Program Files / VROOT path and then paste the downloaded file (without unpacking the ZIP archive) into this replacement folder (with this action, the VRoot program should not run) after launching the program and using the Russian version.
3. Run the VRoot program, connect the included device to the computer (if it was not determined, try installing the latest drivers from the official site of your device). The device should include: USB debugging, installation from unknown sources, checkboxes MTP and Camera (PTP) should be removed in the USB connection, in case the program does not automatically detect your device in any of the connection types (for example, "Synchronization"). carriers "), then try a different type.
3. After the device is determined by the program, press the lower right green button "ROOT", wait.
4. After the last window of the program appears, the device reboots. It can be disconnected from the computer.
5. All of you got ROOT rights. After all this, go to the main menu of the programs of your device and see that a new program "Superuser" (Chinese) has appeared there. When you first use programs that require Root, a window pops up asking Superuser to grant superuser rights (see the screenshots below), you should confirm the permission by clicking the right button (at the end of the inscription on the button, the "+" sign). In the Superuser program settings (the bottom box, with the inscription "ROOT"), programs with these rights are marked with a green check mark.
6. If you could not change the Chinese Superuser to a localized one and the Superuser program icon disappeared from the main menu, and the SuperSu does not work, then reboot the device to start and check again, if the Superuser icon also does not appear, then make unroot ( After launching the VRoot, connect the device to the PC, when it is determined by the program, click the bottom left button (gray)). When the program goes to the start window, click again on the right "ROOT" button.

Ready template for creating a post with firmware
[center] [size = 4] Here is the name of the firmware [/ size] [/ center]
[spoiler = About firmware / About firmware]
There is brief or non-brief information about the firmware ...
[/ spoiler] [spoiler = Install / Install]
1. Before installing in the recovery, you need to make the following wipe:
-Dalvik Cache
-System
-Cache
-Data
2. In the recovery install the firmware
3. Do a reboot
4. The first launch may be long
[/ spoiler] [spoiler = Works / Does not work] [color = green]
Works:

- here that works
[/ color]
[Color = Red] Does not work:

- Here that does not work
[/ color]
[/ spoiler] [spoiler = Screenshots / Screenshots]
Here screenshots ...
[/ spoiler] [spoiler = Download / Download] 1. [url = "http: // here download link"] here is the name of the firmware [/ url]

Thanks:

- Thanks here
[/ spoiler]


useful links

miscellanea

Screenshots of past polls
Attached Image

Survey until 01/17/2018
Attached Image
Attached Image


There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonAttached Imageunder the messages to which you want to add links, or write toQMSthe author of the topic.

Post has been editedCusco - 07.03.18, 09:01
Reason for editing: AEX_v4.6
kanodiry
Message#42
18.02.16, 12:03
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 168
Check in: 07.08.12
Oneplus 3T

Reputation:-  11  +

* sheva1205,
Unpacked
Folder link:https://yadi.sk/d/E20d9t4Lp3dat
Link to zip archive:https://yadi.sk/d/89F7Ws_Sp3dby
Passer777
Message#43
24.02.16, 19:56
Born in USSR
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1586
Check in: 01.11.15
Xiaomi Mi 5S 4/128

Reputation:-  165  +

SAMSUNG Galaxy S6

Attached Image

FOR 2 SIM

Description.
Galaxy S6, dvuhsimochny version for our device.
There is Ruth, but for some reason the binary is not updated ... Below I will give a patch, to install the full and correct root on KitKat.
In the settings - On the phone, Android 5.0.2 is specified, but in fact 4.4.2, I simply forgot to rewrite ...
To interfere, you can edit build.prop along the path system - build.prop, just where you see 5.0.2 you rewrite to 4.4.2 and reboot!
I didn’t strongly use it, I don’t seem to have any mistakes, if anyone finds anything, dug up the fists into their cams!
I do not need to write - "GPS does not work for you" ... DOES NOT work for you! Everything I needed, everything works, if something doesn't work, then it DOES NOT work for you and finish yourself! ;)
By installing custom firmware, you are not doing a favor to the author, you are doing yourself a favor!

Before installing, make a full backup of your firmware, so that later it would not be so insulting!

After installation, the first boot can reach up to 10 minutes, do not panic and do not distort the battery!

Be polite. If they helped you, do not put a message with the text “Thank you! You are super!!!". On our forum, it is customary to express gratitude by raising the reputation of a particular participant. The reputation of other participants can be influenced by any user who has collected 15 useful posts. If you do not have 15 helpful posts, ask the moderator to raise the reputation of the person who helped you through the COMPLAINT button.

Installation It is necessary to install according to the instructions, otherwise it will not start!
Installation It is necessary to install according to the instructions, otherwise it will not start!
Installation via CWM or TWRP. For TWRP, the instruction is as follows: Make wipes - Dalvik Cahe, Data, System, Cahe, lnt.SDcard, Android Secure and reboot from recovery back to recovery, then select the archive that you dropped in advance to the root of the SD card

After installation, the first boot can reach up to 10 minutes, do not panic and do not distort the battery!

Screenshots
Attached ImageAttached ImageAttached ImageAttached ImageAttached ImageAttached ImageAttached ImageAttached ImageAttached ImageAttached ImageAttached Image
In the settings - On the phone, Android 5.0.2 is specified, but in fact 4.4.2, I simply forgot to rewrite ...
To interfere, you can edit build.prop along the path system - build.prop, just where you see 5.0.2 you rewrite to 4.4.2 and reboot!

Download.
Download patch for ROOT - GoogleDisk ==>
Download firmware - GoogleDisk ==>


Post has been editedPasser777 - 16.04.16, 08:20
Reason for editing: Minor edits


--------------------
... the old admins say that on the extinguished matrix of the killed device you can see the face of the last user who made an unacceptable mistake ...
P.s. Back up!
Passer777
Message#44
24.02.16, 20:48
Born in USSR
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1586
Check in: 01.11.15
Xiaomi Mi 5S 4/128

Reputation:-  165  +

MIUI 7 v 5.12.31

Attached Image

For DEXP Ixion ML 4.5


Description.
The extreme version of MIUI 7. The assembly is ported from multirom.mi with Xiaomi Redmi 1S TD. Everything is working. Great camera and sound. A root is built in (update the superuser, remove the check mark from the name division in the settings), several useful programs are built in. Support for games, themes, fonts and a lot of settings. Including a keyboard to choose from. Excellent energy saving.
Registering in a Xiaomi account is optional. If you can not enter the engineering menu through the "mobile uncle", download the shortcut from the engineering menu mtk from Google. Connect to PC by default in MTP mode. To connect in the drive mode, open the USB Mode application on the desktop and select the "Drive" item.
P.s. I do not need to write - "GPS does not work for you" ... DOES NOT work for you! Everything I needed, everything works, if something doesn't work, then it DOES NOT work for you and finish yourself! ;)
By installing custom firmware, you are not doing a favor to the author, you are doing yourself a favor!

Before installing, make a full backup of your firmware, so that later it would not be so insulting!

After installation, the first boot can reach up to 10 minutes, do not panic and do not distort the battery!

Be polite. If they helped you, do not put a message with the text “Thank you! You are super!!!". On our forum, it is customary to express gratitude by raising the reputation of a particular participant. The reputation of other participants can be influenced by any user who has collected 15 useful posts. If you do not have 15 helpful posts, ask the moderator to raise the reputation of the person who helped you through the COMPLAINT button.

Installation It is necessary to install according to the instructions, otherwise it will not start!
Installation It is necessary to install according to the instructions, otherwise it will not start!
Installation via CWM or TWRP. For TWRP, the instruction is as follows: Make wipes - Dalvik Cahe, Data, System, Cahe, lnt.SDcard, Android Secure and reboot from recovery back to recovery, then select the archive that you dropped in advance to the root of the SD card
P.s. The firmware after installation and launch will lag-slow down the first time, do not panic, walk a day, everything will work out and everything will be smooth and good!

After installation, the first boot can reach up to 10 minutes, do not panic and do not distort the battery!

Screenshots

About the volume of sound.
If the volume is not enough, you can download and install this one. Patch ==> It is put out of recovery without wipes. Make a backup before installing. To roll back if something goes wrong ...

Energy saving.
Patch for extra power saving and proper power consumption Link ====>It is put out of recovery without wipes.Only suitable for v5.12.31

Downloading files on the mobile Internet in MIUI.
In order to download files freely on the mobile Internet, you need to go to the "downloads" application and in the settings under "mobile Internet restriction" set the size limit for downloaded files, or set "unlimited", click "OK" and be sure to reboot.
Attached ImageAttached ImageAttached ImageAttached Image

MIUI themes.
For extended access to MIUI topics, it is advisable to log in or register in your Xiaomi account. After that, your favorite themes can be downloaded, imported and applied directly from your phone. You can also search for additional information about MIUI themes. Here ===>

Download.
Download -GoogleDisk ===>


Post has been editedPasser777 - 16.04.16, 08:21
Reason for editing: Minor edits


--------------------
... the old admins say that on the extinguished matrix of the killed device you can see the face of the last user who made an unacceptable mistake ...
P.s. Back up!
Passer777
Message#45
25.02.16, 10:14
Born in USSR
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1586
Check in: 01.11.15
Xiaomi Mi 5S 4/128

Reputation:-  165  +

* Stolbov
At least 200 mAh we were deceived

Because of the recent events, I decided to make a Fix Patch at 3800 mAh.
Suitable for any firmware for our smartphone!
Maybe someone needs it, he personally put it up to himself, as he always suspected that we don’t have these 4 thousand ...: yes2:
A bit of theory.
The patch establishes the correct value of the battery capacity and the power consumption of individual components for our processor and the battery "3800" mAh.


Stitch through custom recovery, without wipes!

The people releasing the official firmware, as usual, did not take care of this and put a file typical for all Chinese phones with zero values ​​and a battery capacity of 1000 mAh
Due to incorrect indication of consumption by applications, it turns out that charge sticking and unexplained charge jumps can occur on a graph (when a charge jumps during a reboot - this is normally the first few cycles)
Due to incorrect indication of the battery capacity and the parameters of our processor, in the flow chart (battery settings) everything you see is not true (to put it mildly) and you cannot determine whether so much% of the charge and how much each component (wi-fi and etc) consumed the charge!
But if it doesn't matter what application \ iron consumed% charge (written under the settings graph - battery), sticking% battery in one place, don’t put it ...
P.S. fix patch creates a backup of your framework-res.apk in the mode-backup folder for restoring ...
After applying the patch, starting with the 2-3 cycle, the charge / discharge sticking% of the charge is minimized, and the consumption of individual components (settings-battery, under the graph) becomes real!

After applying the fix, I recommend deleting the past battery statistics, it is found: /data/system/batterystats.bin.
I also recommend that the sticking of the charge in one place no longer occurs, disable the "Fast Download", is on the way - Settings>Special opportunity and at the very bottom uncheck (default is on).
What is fast loading.
Fast download does not completely turn off the phone, even when it is turned off, it is "not turned off until the end", because of this, it is quickly turned on, and most importantly, BATTERY STATISTICS DO NOT REMAIN.

Attached filePower_fix_Patch_3800_DEXP_ML_4.5.zip(570.7 KB)

FixPatch at 4000 mAh ======>
Fixpatch at 3000 mAh ======>

Post has been editedPasser777 - 01.04.16, 17:53
Reason for editing: Supplement.


--------------------
... the old admins say that on the extinguished matrix of the killed device you can see the face of the last user who made an unacceptable mistake ...
P.s. Back up!
Passer777
Message#46
25.02.16, 16:40
Born in USSR
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1586
Check in: 01.11.15
Xiaomi Mi 5S 4/128

Reputation:-  165  +

Software for Recovery: Stock / CWMR / TWRP DIRECTLY WITH SMARTPHONE !!!

The program requiresROOTandBusybox!


one). We set a temporary ROOT (if you have rights, skip the point).
2). We put BusyBox (if there is, skip the item).
3). We put the program, run, give permission to request the superuser!
We press: I SUPER AGREE !!!
Choose the Recovery You Need!
one). TWRP
2). CWMR
3). STOCK
P.s. All three we need for Recovery (for our smartphone) I already sewed into the program ...
The program will announce the successful firmware recovery!
four). We put the correct ROOT for KitKat already from ModRecovery.
Download.
Download - BusyBox ===>
Download -Attached fileROOT.apk(7.64 MB)

Download - Attached fileRecovery_installer_DEXP_ML4.5.apk(15.68 MB)

Download - Attached fileML4.5_ROOT.zip(548.69 KB)

Enjoy using it!

Post has been editedPasser777 - 01.03.16, 20:38
Reason for editing: Archive to the correct ROOT for KitKat


--------------------
... the old admins say that on the extinguished matrix of the killed device you can see the face of the last user who made an unacceptable mistake ...
P.s. Back up!
Passer777
Message#47
28.02.16, 17:23
Born in USSR
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1586
Check in: 01.11.15
Xiaomi Mi 5S 4/128

Reputation:-  165  +

Patch to change the memory - so that the internal was sdcard1, and the external sdcard0 for firmware =>Sony Xperia E4 V2.0.3 black
Attached fileboot_sd_DEXP-ML4.5_swap_2.0.3.zip(4.12 MB)

After the firmware, make wipe cache and dalvik cache
Well, this is our backup, so that you can roll back!

I also got a very cool Nostalgic-Docoma butanimation, in the styleSony Ericsson
Put pens through any root manager on the way =>system / media with replacement and rights (rw - r-r-- (letter D)) and reboot.
It is better to save the native file somewhere, the backup is also better to have just in case!
Attached filebootanimation.zip(7.59 MB)


Post has been editedPasser777 - 28.02.16, 17:44
Reason for editing: Added bootanimation.


--------------------
... the old admins say that on the extinguished matrix of the killed device you can see the face of the last user who made an unacceptable mistake ...
P.s. Back up!
jemmini
Message#48
29.02.16, 00:47
TWRP
*********
[offline]

Group: Curators
Messages 3708
Check in: 21.02.15
Xiaomi Redmi 4X 3/32

Reputation:-  4092  +

TWRP 3.0for DEXP Ixion ML 4.5 : Attached filerecovery.img(5.98 MB)

Recovery collected on the basis of the Android 4.4.2 kernel kernel version ALPS.KK1.MP7.V1 / Thu Jun 18 10:31:13 CST 2015

Post has been editedjemmini - 29.02.16, 21:48


--------------------
Xiaomi Redmi 4X 3/32
Passer777
Message#49
02.03.16, 12:28
Born in USSR
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1586
Check in: 01.11.15
Xiaomi Mi 5S 4/128

Reputation:-  165  +

* VetugoFF,
Try it.
Archive that threw off, just asking through the recovery, without wipes.
If there is any mistake, just pull it out of the archive and replace it with any handles through the root manager.

Attached fileFonts_DEXP_Stock_ML4.5.zip(10.3 MB)

Butanimation
Attached filebootanimation.zip(192,41 КБ)

Attached fileshutanimation.zip(192,41 КБ)


Post has been editedPasser777 - 02.03.16, 12:35


--------------------
... the old admins say that on the extinguished matrix of the killed device you can see the face of the last user who made an unacceptable mistake ...
P.s. Back up!
sergejj-ishkin1996
Message#50
15.03.16, 17:03
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 50
Check in: 07.01.14
Asus ZenFone Max Pro M1 ZB602KL 3/32

Reputation:-  14  +

samsung s4


description

samsung s4 firmware port with memory re-layout fast beautiful firmware for our phone

screenshots

Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

bugs

not a full translation, an error in the market 905 is treated by deleting the data of the market by rebooting and updating it when you first start to install the mily of the call and root rights from the firmware samsung s 6 or kinguser
Global did not notice if you write something.


setting

through custom recovery with wipe


link


do not judge strictly my first job: rolleyes:

Post has been editedsergejj-ishkin1996 - 15.03.16, 17:05
Passer777
Message#51
24.03.16, 15:13
Born in USSR
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1586
Check in: 01.11.15
Xiaomi Mi 5S 4/128

Reputation:-  165  +

Do not forget that the version2.0You can set FIX to disable / enable unnecessary (and currently needed) Google services and other instant messengers.
On the firmware for its installation and full work everything is there.
Before installing, I recommend to make a full backup of the system, there are no other ways to roll back the FIX!
This fix increases the autonomy and performance of the device, at the moment (by clicking on the links that gave* VetugoFF,), the 14th version of the fix appeared, which is easier and does not disable push notifications, which are so necessary for many

Permanent link to updates===>
A bit of theory about this fics.
Fix correctly and permanently disables such Google services as CheckinService, SystemUpdateService and KidsApiService
Also currently, the fix script controls each time the phone is loaded, the presence and operation of the following applications in the firmware:
FITBIT (Fitnes)
Google TALK (Hangouts)
Google PLUS
Google games
GMail
Google Wear (wrist watch)
Google music
Google Maps (and location services, disabling unnecessary services does not affect other location and GPS applications)
In contact with
Classmates
MailRu Agent
Whatsapp messenger
youtube
game asphalt
rolle youtube
game Evolution
IM +
Kate Mobile (in contact)
Facebook
Google Quicksearchbox
Google advertising service disabled
Kate Mobile pro (in contact)
Google weather
Viber
Mobilesrepublic (satellite app for the new HTC BlinkFeed)
Startup receivers of many applications

And accordingly he turns off \ turns on Google services that are necessary or not needed at the moment.
The more you remove (or disable / freeze) Google applications you do not need, the more economical the firmware will be, and the fix will help with this.

A little help. Removing Google’s applications from the firmware doesn’t mean that Google’s services responsible for the operation of these applications stop running. The fact is that in the struggle with the size of its applications, Google simply transferred a significant part of the application to its services. Reasoning something like this - and not need to delete my applications.
The main purpose of fixing is to increase the efficiency of the firmware.
Google services evil for the battery, but without them almost no way.
The commands in the script are well known to those who know how to use such applications as Android Tuner, DisableService, BatteryStats, Greenify, but firstly not everyone knows which services can be safely disabled and how to do it correctly. And secondly, the script itself disables and enables services depending on the installed applications.

I forgot to indicate in the description of firmware 2.0 that a good program for controlling the CPU (No-frills CPU Control) is installed, many people know about it.
With it you can - Choose the maximum and minimum frequency of the CPU, choose the mode of automatic scaling of the frequency of the CPU, select the I / O scheduler (brg, noob, etc.), keep statistics of the CPU usage, turn off and turn on the DeepSleep mode
In general, in short, with the help of this program, you can configure the device for either good performance or good autonomy.how to do it (FAQ tab).
By default, I set the optimal values ​​on the program 50-50.

Post has been editedPasser777 - 24.03.16, 15:18


--------------------
... the old admins say that on the extinguished matrix of the killed device you can see the face of the last user who made an unacceptable mistake ...
P.s. Back up!
Passer777
Message#52
29.03.16, 12:15
Born in USSR
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1586
Check in: 01.11.15
Xiaomi Mi 5S 4/128

Reputation:-  165  +

* VetugoFF,
VetugoFF @ 03/29/2016, 10:47*
Did not solve the problem with the calendar?

Hold on
Archive sew through recovery without wipe.
Attached fileCalendar-Zametcki.zip(1.61 MB)

I have not just removed it from the firmware since version 2.0, because the calendar memory always weighs in the background and does not allow me to fall asleep with the phone.
Those who do not need notes in the calendar, do not put in order to extend the autonomy, reduce the weight of the firmware and increase the RAM.

Post has been editedPasser777 - 29.03.16, 12:17


--------------------
... the old admins say that on the extinguished matrix of the killed device you can see the face of the last user who made an unacceptable mistake ...
P.s. Back up!
fil
Message#53
01.04.16, 02:23
D'oh!
*********
[offline]

Group: Honorary Gameday
Messages 3395
Check in: 10.11.11
Huawei P10 Lite WAS-LX1

Reputation:-  962  +

M
We move to the subsection "Dexp


--------------------
- I see no reason to leave the house. We still come back every time. © Homer Jay Simpson
Passer777
Message#54
01.04.16, 22:15
Born in USSR
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1586
Check in: 01.11.15
Xiaomi Mi 5S 4/128

Reputation:-  165  +

Step-by-step instruction Full Wipe (clean installation) with explanations on the points!

(to install custom firmware from CWM / TWRP)


Instructions for a clean install.
Before installing the firmware from TWRP, release authors recommend doing Full Wipe (clean installation of the firmware) - we follow this instruction:
FULL WIPE[includes: wipe data / factory reset + wipe cache partition + format / data + format cache + format system + wipe dalvik-cache (+ wipe battery stats if this item contains the recovery menu)] is done from the Recovery menu - and is highly recommended before installing the new firmware so that it does not conflict with tails left over from the previous one.
Full Wipe leads to the complete removal of all programs, settings and data, and the operating system itself is removed - so BE CAREFUL - always make a backup beforehand (from the same Recovery menu) in case something goes wrong with the new firmware.
So, to completely remove the firmware with all settings and data, applications (only the information on the SD memory card will remain untouched, except the .android_secure folder - where the applications transferred to the card are stored) - make FULL WIPE - in the Recovery menu, select the following points and agree to the operation by selecting the only item Yes (Vol + / Vol- - up, down, Power - confirm for CWM, for TWRP - select with hands):

1. wipe data / factory reset[in the Recovery- menu>wipe / format] - full reset of settings and data, clearing the / data and / cash partitions in the internal memory of the device, clearing the .android_secure folder - which stores the applications that you transferred using the built-in a2sd from the internal memory to the SD card - an analogue Hard Reset on WinMo (after the fact that after HR on WinMo, you will bring the system to the state “just from the counter” -
first, everything in the device’s memory will be erased, and then the original system firmware will be rolled back - thus restoring the entire system info in its original form, if it has been changed or deleted; Factory Reset on Android, however, only clears user data / settings, etc., BUT does NOT restore anything, including system data and programs, if you deleted something — in this case, only flashing will help — such cleaning (together with wipe dalvik-cash) can help with the occurrence of Glitches after flashing (for example, when no wipes were made before installing the firmware, and now the new system does not understand the old settings)

2. wipe cache partition[in the Recovery- menu>wipe / format] - clearing the partition / cache - temporary buffer used by the system to speed up access to the data stored in it, which can most likely be requested by the RAM

3. format / data[in the Recovery- menu>wipe / format] - formatting a partition with user data and settings for all user and system programs

4. format / cache[in the Recovery- menu>wipe / format] - format the cache partition

5. format / system[in the Recovery- menu>wipe / format] - formatting the system partition - in fact, the complete removal of traces of the operating system -ATTENTION, after this point you will not be able to start the device until the new firmware is installed! Only the engineering menu and recovery mode will remain available.

6.wipe dalvik-cache[in the Recovery- menu>wipe / format] - clearing the cache of .dex files - this is a special format of the dalwick files launched by the virtual machine - separate clearing of this cache can help, when you need to save all user data, settings and applications - the cache will be recreated the next time the machine starts up, the download may longer than usual.

Fulfilled all the points, then I decided to check the wipe / format done correctly:
but). -In the recovery, select the item MOUNT and tick: SDcard-internal, Micro.SDcard-external
b). - Next, we connect the smart to the computer and click on MOUNT USB-STORAGE
at). -The computer will detect the drives (I may have E and H differently) and open the remaining android_secure folder from the inside, and the LOST.DIR and android_secure folders from the external one, if any.
d). -The remaining folders can not touch (I recommend to sign your folders, let's say - "1-Music", etc., it will be easier to delete all the tails of the old firmware), these are your backups, music, photo pictures, third-party application cache from the old firmware, which you probably want to restore via Titanium Backup or from Market.
Now you can sew any ROM!
This instruction was honestly copied fromof thispost, a little corrected by me under our TWRP 3.0, only on version 3.0 MOUNT works.
Do not forget, there is Russian on version TWRP 3.0!


Post has been editedPasser777 - 03.04.16, 18:13
Reason for editing: Corrected


--------------------
... the old admins say that on the extinguished matrix of the killed device you can see the face of the last user who made an unacceptable mistake ...
P.s. Back up!
Passer777
Message#55
02.04.16, 12:18
Born in USSR
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1586
Check in: 01.11.15
Xiaomi Mi 5S 4/128

Reputation:-  165  +

TELEPHONE OR RECOVERY MENU WITHOUT POWER BUTTON


one). -Need custom recovery (if not, sew separately with Flash Tool).
2). -Charger.
3). -Press the volume + rocker and turn on the charger to the network.
four). -Go into Select Boot Mode (boot mode), volume rocker + select Recovery item and press volume rocker -
five). - Next you get to TWRP and look for the Reboot item (Reboot)>System (System) further tap and voila, the phone is on.
P.S. Described under TWRP Recovery version 3.0, for another version it is slightly different, but the essence is the same.

Post has been editedPasser777 - 02.04.16, 13:04


--------------------
... the old admins say that on the extinguished matrix of the killed device you can see the face of the last user who made an unacceptable mistake ...
P.s. Back up!
VetugoFF
Message#56
04.04.16, 09:06
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 140
Check in: 19.04.10
Xiaomi Redmi 3S

Reputation:-  8  +

It would be nice to add to the post above that through the hposed module, you can wake up the smartphone with volume buttons, I don’t remember the name of the module, and if the memory doesn’t change, the box can also be turned on in the gravity module.
sergejj-ishkin1996
Message#57
04.04.16, 10:29
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 50
Check in: 07.01.14
Asus ZenFone Max Pro M1 ZB602KL 3/32

Reputation:-  14  +

CyanogenOS_12.1 BETA v1


description

CyanogenOS 12.1 beta version on kernel 3.4.67 port withLenovo A319


works

phone sms ussd requests on both sim cards
camera (photo and video)
lamp
airplane mode
sound (no crack in sleep mode)
headphone sound
wfi bluetooth
online video (youtube, vk)

bugs

Does not shoot video on third-party cameras
Disable Sim Cards
The fm radio does not work (you need to delete the lib folder along the path \ system \ priv-app \ FMRadio) does not output sound to the speaker

screenshots

Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

setting

Through custom recovery strictly with all wipe or there will be errors

download

request for bugs to inform me, there are minor cosmetic not working
p.s I ask for petition for under-the-file problem with pc

Post has been editedCusco - 26.02.17, 10:54
Reason for editing: Pictures under spoiler
Warl0ck
Message#58
07.04.16, 09:14
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 117
Check in: 22.02.08
DEXP Ixion ML 4.5

Reputation:-  5  +

Sergejj-ishkin1996 @ 04/04/2016, 10:29*
request for bugs let me know

I just noticed that there are no contacts at all, and there is no such item for synchronization in the Google account.


--------------------
I am part of the force that always wants evil and always does good ...
sergejj-ishkin1996
Message#59
07.04.16, 09:20
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 50
Check in: 07.01.14
Asus ZenFone Max Pro M1 ZB602KL 3/32

Reputation:-  14  +

* Warl0ck, gapps at a minimum are only the Play Market and contacts need to be imported* Warl0ck,
Passer777
Message#60
07.04.16, 12:08
Born in USSR
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1586
Check in: 01.11.15
Xiaomi Mi 5S 4/128

Reputation:-  165  +

Still highly recommend to those who putMod V2.0.5For the BEST PERFORMANCE and AUTONOMY, do the following:Disable monitoringMTKLogger.

Surely, many have seen in the system drive of Android a folder called mtklog, but many probably do not know what it is for!
So - this technical folder is designed to collect logs (reports) on application performance and record application errors (logging is never unloaded from memory and records any action of the system, applications, pressing a button, etc.) on devices with an MTK processor . It doesn’t carry any usefulness for most users, as it is only needed by developers or people who pick system apk-files, and you can safely delete it (folder), but bad luck - some time passes, and it appears again (and with time may grow to weighty sizes, if it is not periodically removed).

The reason is that the MTKLogger system process works, which constantly monitors the operation of applications and writes logs. But you can’t remove it through regular process controls. How to be?

For the version of MOD 2.0.5 download -Attached fileMTKLogger.apk(224.54 KB)

one). -We download the file along the path: system / app and set the permissions 0644 (with the letter D) to reboot.
2). -We go to the engineering menu (on version 2.0.5, you can get into it along the path: Settings / AOSP Settings / Engineering menu).
3). -In the engineering menu Scroll swipe sideways up to the Log and Debugging tab and select MTKLogger.
four). -Further, in the window that opens, press the stop button and in the upper right corner (above the clock) press the button with the settings.
five). -In the settings window that opens, disable the switches in points: MobileLog, ModemLog, NetworkLog.
6). - Exit settings (disable / enable settings are savedautomatically).
Attached ImageAttached ImageAttached ImageAttached Image

Now the mtklog folder and the previously dropped MTKLogger.apk can be deleted.
Reboot the device - and the MTKLogger process will no longer be accumulated and monitored by the system, which will increase memory, performance and autonomy.

This method is useful for any firmware, taking into account only that some firmware from the beginning needs to be thrown into the system - MTKLogger.apk and then disabled in the engineering menu, and in some, MTKLogger is already in the system.
P.s. without throwing apk into the system, you will not be able to disable this entry and collect logs!
If you need a log, you can return everything back the same way.

The instruction was honestly copied fromof thispost, I added a little.

Post has been editedPasser777 - 07.04.16, 13:15
Reason for editing: In the header


--------------------
... the old admins say that on the extinguished matrix of the killed device you can see the face of the last user who made an unacceptable mistake ...
P.s. Back up!
VetugoFF
Message#61
07.04.16, 18:59
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 140
Check in: 19.04.10
Xiaomi Redmi 3S

Reputation:-  8  +

I would like to note the firmware 2.0.5, the ease and speed of the firmware have already been appreciated, Many thanks to the author, perhaps the best work! Super light version, yes even 4.4.4
True, the synchronization of contacts and calendar does not work, for obvious reasons, but this is solved by installing synchronizer programs ...

Post has been editedVetugoFF - 07.04.16, 22:21
Reason for editing: minor edits
Dexp
 

30 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 05/19/19, 18:14