I purchased a waterproof dust body LAND ROVER Discovery V8 on ALI.

Opening V8 4.0 '' screen waterproof phone 3G GPS MTK6572 dual-core 1.3 GHz 512 4 g 5-megapixel camera GPS dustproof mobile phone

The phone constantly turns off spontaneously. It turns on only by jerking the battery. I tried to change sims and operators - it does not help. Please tell me how you can cure this problem.

Hello. A daughter gave LAND ROVER Discovery V8. I can not remove any extra applications: Movie Studio, E-mail, and all sorts of not needed by me. But most importantly, I don’t know how to turn off the loud melody when switching on and off. How to remove the sound of keystrokes. The camera is certainly weak, although they write 5 megapixes. But okay. I can not put the Navitel. ON HTC set-normal. Is it possible to somehow reflash it, so that more settings appear?

try this firmwarehttp: //www.needrom.com...-4-4-4/#comment-248295I switched to it at the end of March, it works fine, I got a great Navitel and a few more navigators.

I got this phone. Everything is good, although the camera is of course rubbish, but it was not taken for that, but the battery is huge. But did not see the satellites jeepies. And it was not possible to enable debugging on YUSB.
As a result, I tried to flash the firmware from this topic with the regular receipt of a "brick". Fortunately, the preloader did not sew, so I was able to reflash the phone back. Used a modified flashtool from here:http: //savagemessiahzine.com/forum/d..lMod+fly-droid.org.zipand firmware from here:http: //forum.china-iph....8-t37777.html#p1410660
Naturally, as well as the author of the post, flew off. Just like him, I restored them: I installed kingoROOT, then through MTKFlashTool I changed my name to my relatives from the sticker. As a result of all these shamanism, GiPiEs started up. Which, actually, was what I needed. In summary, when updating the firmware in any case, we do not change the preloader.

After unsuccessful firmware Discovery V8 + (MT6582) became a full brick, not including anything including recovery. I would be grateful for help in solving the problem.

all the best! The phone itself turned off and no longer responds, flash it? When connected to the PC, a new device is constantly detected and after 2 seconds it is turned off, and so endlessly, it is not possible to flash, who knows what? how to fight? the phone shows signs of life but ...

HELP PLEASE !!!!

The device is not flashed, it does not turn on, it gives an error in the Flash-head that the memory of the firmware and the memory of the device are different! Found in nete 2 firmware and both such help! Can you advise what is completely left to flash ???

Here is such a crap .... the theme is dead ....

The same nonsense was brought before NG. Knocked to all in a personal on Chaynafon, who noted the presence of a backup. One comrade helped, found a backup and flooded it on Yandex.Look heremy answer is there below.

Post has been editedI go to the forest - 17.02.17, 16:27

I go to the forest
Good evening, it doesn’t work, the errors are basic, like 2, I fill in the screenshots, the question is what, when installing the scatter somewhere there are all the checkmarks automatically and somewhere not, do I need to put all the checkmarks? Should the battery be charged? I connect the phone, the computer does not detect it, I take out the battery for a second, the phone is determined, I insert the battery (otherwise the phone will disconnect ....) and then these are the pictures. maybe there’s a diagnosis right away that memory is dead? or push around yet? I turn on the cable directly to the motherboard, try another computer? cable? flash drive version? thanks for the answer!


Post has been editedUncle - 20.02.17, 09:47

I go to the forest
until confused ....


Post has been editedUncle - 20.02.17, 09:48

To be honest, all the details flew out of memory, lifted almost 2 months ago, and attempts at combinations without this backup were more than a hundred accurate, so there is a mess in my head, which is also gradually forgotten))
Firstly, I recommend shortening the path to the folder and excluding the Cyrillic alphabet. On the PC at that time was w7x64. It turned out to be flashed on version SPFlashTool 5.1452 (although it can turn out to be another), if the memory does not change the backup, I first prepared it in MTKdroidTools (read the posts of the Df_LSD user in the same topic on the tea party). It seems that the phone was connected without a battery after clicking the download button. As for the checkmarks - if you put a daw, then the path to the corresponding file that is registered in the scatter should be registered, if there are not enough files, then copy from another backup. I probably can’t tell anything more

nothing helped, the phone for parts ... bad Chinese shit ...

I bought my son this phone, he successfully broke it. I ordered the case and the sensor on Ali, they came, I collected the phone, and I forgot the digital password successfully. In the recovery on "on" + "gr. +" Did not enter, "on" + "gr. -" also, on "on" + "gr. +" + "Gr. -" too. I decided that it should be crossed over. I downloaded, make backup - "why?", We sew right away
in short, got a corpse. A few days went through the firmware. It turns out there are versions of the phone with NAND memory, there is with EMMS. So you still can not pass. As a result, the phone rose firmwarehttp: //www.needrom.com...ad/discovery-jiekx-v8/
There is Android 4.4.2 in contrast to version 4.2.2, which is both on the box and on the website in the specifications, apparently in the box from the Discovery V8 was the V8 + phone
Root Kingroot is put, IMEI is restored, but there are two problems:
1. After locking the screen, the sensor stops working. From the moment of launch, there are no complaints, the main thing is not to let the phone extinguish the screen
2. The volume buttons do not work.
can anyone suggest? More certainly worried about the first problem.

The fact that the touch stops working after locking is a defective sensor. I have with Alcatel with somehow it was.

Also ordered such a device with Ali. The problem is that the connection is periodically lost and you have to reboot. When communicating with the seller, he asked for my account to return to him what he would change to another, but I did not. I used the week and put it in the box. The microphone is good, did not complain. Battery from 1 to 2 days, depending on how to use. Lies like new. Sell ​​anyone need. Perhaps the firmware will help, I myself do not shy about it.

Someone will help the firmware for Discovery V8 Lunate LT52. 1GB / 8GB

Korss7,
How did you fix it? similar problem

http: //forum.china-iph…i-bekap-t35660-60.html

new firmware from the factory. Answer # 72 in the link helped. All the others did not fit.