Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
UMI Rome X - Firmware |
Message#2 15.02.16, 20:07 | |
TWRP [offline] Group: Curators Messages 3708 Check in: 21.02.15 Xiaomi Redmi 4X 3/32 Reputation: 4102 | TWRP 3.0.2 ��� UMI Rome X download:- based on Android 5.1 firmware kernel version of UMI ROME X.V3.01_20160120 / Sat Jan 23 08:14:07 CST 2016:recovery.img(13.34 MB) - based on Android 5.1 firmware kernel version of UMI ROME X.V3.05/ Thu Mar 31 10:53:48 CST 2016:recovery.img(13.35 MB) Stock recovery - UMI ROME X versions.V3.01_20160120 / Sat Jan 23 08:14:07 CST 2016:recovery.img(7.09 MB) - UMI ROME X versions.V3.05/ Thu Mar 31 10:53:48 CST 2016:recovery.img(7.1 MB) ATTENTION! Install the build version corresponding to the installed firmware! Post has been editedbgakasha - 17.04.18, 13:38 Reason for editing: In the hat! -------------------- Xiaomi Redmi 4X 3/32 |
Message#3 29.03.16, 15:27 | |
Experienced [online] Group: Friendssavagemessiahzine.com Messages 647 Check in: 04.03.14 LeEco Le 2 x527 Reputation: 148 | Getting Root It will be filled and checked when the smartphone comes. Framaroot 1 Kingoroot Tested working Baidu root 1 Through local updates update-root-stock-LP-5.1.zip(4.82 MB) We put somewhere on the USB flash drive. Run Settings-About device-Software update-three points in the upper right corner-Local update-select the file and flash it. Custom recovery Install TWRP from the header and go to the topic® SuperSU, download the ZIP archive and flash it through custom recovery (Installation - tap on the archive with the root - svayp) Post has been editedbgakasha - 13.02.18, 00:11 Reason for editing: In the header |
Message#4 29.03.16, 15:36 | |
Experienced [online] Group: Friendssavagemessiahzine.com Messages 647 Check in: 04.03.14 LeEco Le 2 x527 Reputation: 148 | Recovery Installation It will be filled and checked when the smartphone comes. SP Flash Tool| without root | We will need: 1) Program SP_Flash_Tool (available in the header) 2) Drivers (there is a cap) 3) Firmware (there is a cap) 4) recovery.img Instruction: 1) Unpack the archives of the SP Flash Tool, the driver and the archive with the firmware, in the folder with the firmware put the replacement, downloaded recovery.img 2) Turn off the smartphone. The cable is not connected to the computer. 5) Disconnect the cable from the phone. 6) Run the program SP Flash Tool. 7) Click on the Scatter-loading button and select the MT6580_Android_Scatter.txt file (it is in the folder with the firmware). 8) Remove the checkmarks from all items except RECOVERY 9) Click the Download button. 10) Connect the phone to the computer with a cable. The program should see it and start the firmware. We are waiting for the appearance of a green circle with the inscription OK !!! 11) Disconnect the phone, turn it on ... wait a couple of minutes until it starts up and configure it as convenient for us! Rejoice)) Flashify or Rashr| Route | Flashify with screenshots, if you use the English version and something is not clear. 1.We start a program from the siteFlashify (for root users)As can be seen from the name of the link, the root should be present. 2. Install the full version, actually sew. 3. I pull out the recovery.img image from the zip archive (it's faster for me as if img is sewn, then I can reboot right away into recovery, zip - into the system then into recovery) 4. Advantages: quickly flash from cwm to stock for example. 5.If you sew a zip make sure that this zip is not packed into another one (it already was) 6 As usual, only you yourself are responsible for your actions. Successful firmware! Post has been editedbgakasha - 20.12.16, 06:54 Reason for editing: In the hat! |
Message#5 30.03.16, 22:24 | |
Seeker of essence [online] Group: Friendssavagemessiahzine.com Messages 2087 Check in: 30.01.13 Reputation: 457 | Maybe the firmware is universal for several processors at once, the rest is the same hardware. For LTE-4G this firmware calm down! Here is a screen with a modem from this firmware. Post has been editedkovaxx21 - 30.03.16, 23:19 -------------------- 熟能生巧 |
Message#6 01.04.16, 07:59 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 145 Check in: 10.03.09 Xiaomi Redmi S2 Reputation: 22 | |
Message#7 01.04.16, 08:13 | |
Seeker of essence [online] Group: Friendssavagemessiahzine.com Messages 2087 Check in: 30.01.13 Reputation: 457 | [email protected], 10:50 Yeah to have flown. -------------------- 熟能生巧 |
Message#8 01.04.16, 08:32 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 75 Check in: 21.09.10 Xiaomi Redmi 3 Reputation: 4 | adjail, it does not make sense to change the system partition to someone else’s, after firmware it’s the same for everyone (for one firmware version). If the problem is soft, then it is hidden in hidden sections that are not usually stitched (nvram, etc.) I will try to put my almost complete backup (without nvram) a bit later. Post has been editedc898771 - 01.04.16, 08:44 |
Message#9 01.04.16, 10:18 | |
Seeker of essence [online] Group: Friendssavagemessiahzine.com Messages 2087 Check in: 30.01.13 Reputation: 457 | |
Message#10 01.04.16, 10:23 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 75 Check in: 21.09.10 Xiaomi Redmi 3 Reputation: 4 | |
Message#11 02.04.16, 18:13 | |
Experienced [online] Group: Friendssavagemessiahzine.com Messages 647 Check in: 04.03.14 LeEco Le 2 x527 Reputation: 148 | Official firmware firmware via SP Flash Tool Instructions taken from the official forum and translated What do you need: MT65x3 USB VCOM drivers.zip(7.73 MB) SP Flash Tool from UMIdigi.com Getting started: 1. Extract the firmware file to a computer in any folder. 2. Unpack the SP Flash Tool: 3. Click on the “scatter-loading” button: 4. Select the folder where we unpacked the firmware. 5. Select MTK *** _ Android_scatter.txt. need to remove the checkbox with Preloader Now we are ready to flash the phone. 6. Check the charging of the phone and whether USB debugging is enabled. Then turn off the smartphone. 7. Click on the Download button. 8. Then connect the phone via USB. If at this step you get the error "PMT changed for the ROM, it must be downloaded ..." you can change the option with"Download only"on"Firmware Upgrade"and repeat. Now you see the yellow progress bar Firmware finished. We can turn off the phone. Post has been editedfackfack - 23.11.17, 19:32 Reason for editing: In the hat! |
Message#12 04.04.16, 08:24 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 624 Check in: 09.11.11 Vernee Mix 2 Reputation: 16 | HELP guys! Tomorrow to give the phone and he constantly loses the network. In addition, I found such a bug, as soon as I select "only 2G" in the settings, the phone does not see any networks at all. Firmware 3.02 did not give anything; moreover, when I try to download something from the playmarket, I get some kind of error with a long name. Had to roll back to 3.01. What to do? |
Message#13 04.04.16, 09:20 | |
Experienced [online] Group: Friendssavagemessiahzine.com Messages 683 Check in: 15.03.07 Reputation: 95 | Tomorrow I’ll give the phone away and he constantly loses the network. In addition, I discovered such a bug, as soon as I select “only 2G” in the settings, the phone doesn’t see any networks at all. I'm afraid to upset, but you seem to have a hardware problem. Firmware is not solved here. In the frequency of the engineer did not turn off? If so, try to turn it on. Theoretically, when reflashing, everything should return, but it is possible that the engineer only changes the values that are stored in the non-flashing area (like NVRAM). You can also try to flash through the USB flash drive in the Firmware Upgrade mode (unlike Download only, the memory is formatted, that is, it is completely cleared). It is often frightened that IMEI is lost after that - it is not. In this mode, NVRAM is first copied, memory is formatted, then NVRAM is written back. But in no case do not use the Download All mode, if you haven’t preloaded NVRAM, it is not saved. I recommend to do in any case before the start of experiments, there are no extra bucks. Optimally do this in TWRP. Well, remember that all the manipulations you do at your own peril and risk, if you took up an independent flashing, then be ready for any surprises. Some guarantees of the success of the operations can be given only by the manufacturer. |
Message#14 04.04.16, 14:24 | |
Novice [offline] Group: Active users Messages 37 Check in: 03.11.12 Sony xperia v Reputation: 16 | Good afternoon, phone a couple of days, hangs on Umi. I decided to flash it, it gives me this error in 20 seconds, the acb is charged, Yusb changed ports, Yusb tried different, already charged the phone 100%, tried different versions of the Sp Flash Tool constantly produces this error 4008, what to do? Could not flash memory from the factory be missed, literally one day worked and died. Thanks, who knows what. Post has been editedolegusss - 05.04.16, 23:50 |
Message#15 04.04.16, 14:30 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 7745 Check in: 04.04.09 Xiaomi Redmi Note 5 3/32 Reputation: 1105 | Tidus, Flash through flashlight in Firmware Upgrade mode SP_Flash_Tool is the flash driver for MTK smartphones. (Post sever20067 # 42011255) In some cases, you need to remove the battery from the device and try to flash it without it. Post has been editedshornik15 - 04.04.16, 14:42 -------------------- Teachers of the Russian language! Please do not disturb. |
Message#16 04.04.16, 15:04 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 7745 Check in: 04.04.09 Xiaomi Redmi Note 5 3/32 Reputation: 1105 | Tidus, It is recommended to change the firmware version to version 5, it is highly desirable to start with version 5.1352.01 and try to flash the device through the firmware upgrade (the firmware must be original for the device and contain all the blocks). Also try changing the firmware cable to a better one. http: //savagemessiahzine.com/forum/d...sh_Tool_v5.1352.01.rar And here is the last one. http: //savagemessiahzine.com/forum/d...sh_Tool_v5.1604.00.rar Try again first without an accc, and then immediately inserting an acc sometimes helps. Post has been editedshornik15 - 04.04.16, 15:11 -------------------- Teachers of the Russian language! Please do not disturb. |
Message#17 04.04.16, 16:47 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 7745 Check in: 04.04.09 Xiaomi Redmi Note 5 3/32 Reputation: 1105 | Tidus, Remove the old driver, and install it on a new one, and it would not be a bad thing to install an ad driver. -------------------------------------------------------------------------------------------------- turn off the smartphone (cable is not connected to the computer) take out the battery and insert it back (we do not turn on the smartphone) run the program SP_Flash_Tool push the scatter-loading button choose the file MT6589_Android_scatter_emmc.txt (the file from the folder with the firmware, the numbers in the file name may differ and depend on the processor model) click Format leave the checkboxes on Auto format Flash and leave the last paragraph Format whole flash exept Bootloader Click OK connect the smartphone cable to the computer a few seconds should run a red bar after yellow strip when the yellow bar is completed, you will receive a pop-up window with a green circle, the process is successfully completed. close SP_Flash_Tool disconnect the smartphone from the computer After formatting, the firmware of the smartphone is carried out with all the checkmarks through the download button Post has been editedshornik15 - 04.04.16, 16:51 -------------------- Teachers of the Russian language! Please do not disturb. |
Message#18 04.04.16, 17:08 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 7745 Check in: 04.04.09 Xiaomi Redmi Note 5 3/32 Reputation: 1105 | Tidus, Software to remove drivers. http: //savagemessiahzine.com/forum/d...SBDeview.v2.30.x32.rar http: //savagemessiahzine.com/forum/d...SBDeview.v2.30.x64.rar Post has been editedbgakasha - 22.12.16, 19:12 Reason for editing: In the hat! -------------------- Teachers of the Russian language! Please do not disturb. |
Message#19 05.04.16, 00:55 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 755 Check in: 15.06.13 Reputation: 20 | When I try to flash the flash drive after a minute or two, I get an error Take a screen shot when the firmware goes, maybe people will understand what the problem is. First, a red stripe runs through, checks the memory, and then a long yellow stripe, then it sews. You do not understand before red or after, or already with yellow. There should be the parameters listed on the left and bottom, a virtual COM port, if there is, then the driver works, if not, then there is a problem in the drivers. Then try to install through the device manager - install an old device - COM ports - MediaTek PreLoader USB VCOM driver In older versions of the program, it was necessary to set the speed of the firmware less if errors were issued. Here it seems like the clones of the phone are located, maybe for them there are firmware from the card. Post has been editedDmitru_18 - 05.04.16, 01:37 -------------------- YOYO V3, UMI ROME X, HOMTOM HT20 PRO, CHUWI Hi10 Plus (broken) |
Message#20 05.04.16, 11:14 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 755 Check in: 15.06.13 Reputation: 20 | I have already tried everything and the firewood demolished, everything that is possible. Maybe in the settings of the COM port in the device manager to dig. But first, another operating system is necessary or a computer. I can not sew, even burst, I boot into another operating system, for example, XP immediately, the firmware is on. But this time, Windows 10 pro 64bit is normally flashing and many have written about it here. I also advise you to plug the cord into the phone first, put it and then connect it to the computer, there is a kind of flimsy connector, with bad contact and while you put the breaks on the table go. Post has been editedDmitru_18 - 05.04.16, 11:29 -------------------- YOYO V3, UMI ROME X, HOMTOM HT20 PRO, CHUWI Hi10 Plus (broken) |
Message#21 05.04.16, 12:07 | |
CALM [offline] Group: Friendssavagemessiahzine.com Messages 1448 Check in: 02.12.13 Xiaomi Redmi 4X 2/16 Reputation: 115 | Tidus,Links to my backup for stock recovery should probably be laid out in the cap .. Three files ...https://yadi.sk/d/BKYKtx_YqkEck https://yadi.sk/d/REYVQA4cqkEgL https://yadi.sk/d/9gw2dsS9qkEjd -------------------- And today we have a cat gave birth to kittens yesterday. The kittens got out a little, had to shove them back. |
mobile version | Now: 06/18/19, 19:02 |