[X]Assistant

[terakon]

ESCAM QF002 - Discussion
[ip camera] 720p Wi-Fi camera with IR illumination for ~ $ 30-40.

Discussion пїЅ

Specifications

A photo

Firmware

Off firmware
General_HZXM_IPC_HI3518E_RA50H10L_8188_S38_V4.02.R12.Nat.20170215_ALL- firmware from 02/15/2017
ONVIF Firmware
General_HZXM_IPC_HI3518E_RA50H10L_8188_S38_V4.02.R12.Nat.20161024_ALL.bin- firmware from 10/24/2016 (maybe not of firmware)
General_HZXM_IPC_HI3518E_50H10L_S38_V4.02.R12.Nat.OnvifS.20160615_ALL.rar(6.58 MB)
- firmware from 06/15/2016(unverified, if anyone dares to check - write down the result)
General_HZXM_IPC_HI3518E_RA50H10L_8188_S38_V4.02.R12.Nat.20160520_ALL.rar(6.39 MB)
- firmware from 05/20/2016
General_HZXM_IPC_HI3518E_RA50H10L_8188_S38_V4.02.R12.Nat.20160307_ALL.rar(6.35 MB)
+ Mirror- firmware from 03/07/2016
General_HZXM_IPC_HI3518E_RA50H10L_8188_S38_V4.02.R12.Nat.20160219_ALL.rar(6.35 MB)
+ Mirror- firmware from 02.19.2016
Firmware catalogunverified
General_HZXM_IPC_HI3518E_50H10L_S38_V4.02.R12.20150116_ALL.rar(6.81 MB)
- firmware from 01/16/2015
General_HZXM_IPC_HI3518E_RA50H10L_S38_V4.02.R12.20141209_ALL.rar(6.82 MB)
- firmware from 12/09/2014

useful links

Product page on the manufacturer's websiteortyts
Disassembly and installation of rad-ra
Configure RTSP streamandhereandhere
Traffic consumption
connect to camera viaTelnet
If you get offtimeafter power off
Recoveryafter unsuccessful firmware (addition: the camera must be connected not only via Uart, but also to the router with a network cable!)
Microphone hissing

Instructions

Setting up the camera through no-ip
Instructions in English
- Instructions for setting up sending emails:
motion + detection.doc(684 KB)
IMPORTANT!, if not helped, then readhere

Video instructionhow to set up a photo with an alarm and write it to a memory card
Video instructionon setting up a motion sensor
instructionto xmeye

Video samples

Customers

XMEYEfor Android
Vmsfor windows
CMSfor Windows +Instruction
xmeye.net- to view from any PC via IE browser (requires ActiveX installation)
Soft

Buy

Banggood
Dx

Equipment

- ESCAM QF002 camera
- Power supply 5V 2A (with plug: EU / UK / AU / US)
- USB cable
- Red ceiling mounting
- Dowel mount
- Clip
- Instruction (in english in doc)

• Before posting read the message Video section rules
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedmihadom - 16.11.18, 17:07

Reason for editing: standardized section

[terakon]

It may be useful to those who could not figure out how to set up the camera so that it takes screenshots on the memory card when it detects movement, because by default, it only records motion video. In general, it turned out that the camera most likely reserves all free space on the memory card for video files and that the camera does not only save the video, but also the screenshots, you need to select the memory (microsd card) in the camera settings, through the browser and mark its disk space in two parts - 1. select one for video, and the other for screenshots, i.e. set the size of sections for video files and screenshots, after which it all worked for me:

Customization

Post has been editedterakon - 25.03.16, 12:12

[sergiy1976]

How to reflash?

[terakon]

[email protected], 21:42

How to reflash?

via Internet browser from a computer or from xmeye website. Enter the camera settings, scroll through the menu and there is an update or upgrade item, specify the path to the firmware file with the .bin extension and then the start button or something like that and wait for the camera to flash, the process will be displayed, after the firmware the camera will reboot and everything is ready

[vassiaboss]

Hello. I can not configure the recording on the movement to the memory card, like in the menu I ticked the alarm. What am I doing wrong? Can that will advise?

[terakon]

vassiabossI checked - I wrote everything as it should. Pick the settings. Does screenshots make by movement?

Post has been editedterakon - 09.04.16, 17:57

[vassiaboss]

Terakon @ 04/09/2016, 16:56

Does screenshots make by movement?

When you run the program on the phone, writes on the move, does not want to the memory card, turn on the recording permanently, then writes. Like picking settings and this way and that

[terakon]

vassiaboss
You did not answer - the photo makes the movement?

Marked by position?

IMG_20160409_210042_2044614590.jpg(23.31 KB)


Post has been editedterakon - 09.04.16, 21:03

[vassiaboss]

Terakon @ 04/09/2016, 19:58

photo does on the move?

Marked by position?

The photo does not, checked these settings, only the buzzer on the phone is heard when driving, neither the photo nor the video remains on the memory card

[terakon]

vassiaboss
Did you make the markup of the memory card under the screenshots and video?

[vassiaboss]

Terakon @ 04/10/2016, 16:27

Did you make the markup of the memory card under the screenshots and video?

no, put in, turned on and all

Posted 04/04/2016, 5:56 PM:

And another question, I remove the flash drive and it does not open the card reader.

[terakon]

vassiabossUnder the screenshots, it should be marked out from the camera's camera, a couple of posts above described as.

On the PC, as I understand it, she will not see, because the camera formats it to its standard

[vassiaboss]

Terakon @ 04/10/2016, 18:58

It should be marked out from the camera's camera, a couple of posts above described as.

I looked, I will try tomorrow, and it says there that by default he should write a video, let's say I don’t need screenshots, so the video then he should write?

Vassiaboss @ 04/10/2016, 10:15

mark out the camera

Mark the directory, the result is 0. No video or screenshots there. Although the movement reacts, Messages come, but there are no video and photo recordings

[terakon]

vassiaboss
I have the opposite - everything is written, but messages do not come

[Sevpilot]

Does the speaker on the camera work for everyone normally? I press the speaker to go crack. Any ideas?

Post has been editedSevpilot - 24.04.16, 11:46

[StAlex007]

How do you come to the camera via the site ??? What only did not do, and does not go all.

[Sevpilot]

StAlex007,
I go through xmeye site through interner explorer and ip address is also no problem

[StAlex007]

Sevpilot,
And what kind of Windows?

[Sevpilot]

StAlex007,
7win

[StAlex007]

Sevpilot,
My speaker also crackles, I think everyone has it.
ip camera, as I understand it, we look at DEVICE MANAGER.
There is still a problem. There is a computer with a Wi-Fi module. So, through the Wi-Fi module, the VMC program finds the camera, but does not see it through the cable (the computer is connected via cable). Although DEVICE MANAGER sees both by cable and by wifi. What is the problem.

[Sevpilot]

StAlex007,
Is there a wi fi modem separately? I connected the camera to the modem without a problem.

Post has been editedSevpilot - 24.04.16, 22:55