[X]Assistant

[Sergp2008]

Kyocera DuraForce - Official firmware
Kyocera DuraForce E6762, E6560
Description | Discussion | Firmware пїЅ | Discussion Kyocera Torque (KC-S701) пїЅ | Kyocera Brigadier в„ў Discussion пїЅ

Drivers and Utilities

Fastboot utility
DuraForce 32bit Driver
DuraForce 64bit Driver
UniversalAdbDriver.zip(15.18 MB)

Firmware

Firmwares for E6560 AT & T

Firmware 4.4.2 for DuraForce E6560 1.102 AT & T ENG
Firmware 5.1.1 for DuraForce E6560 2.014 AT & T ENG NO ROOT LITE
Firmware 5.1.1 for DuraForce E6560 2.014 AT & T RUS from SergP2008
Firmware 5.1.1 for DuraForce E6560 2.014 AT & T RUS from Riznychenko
Firmware 5.1.1 for DuraForce E6560 2.014 AT & T RUS from Riznychenko - pre-translated

Firmware for E6560L

Net stock firmware on E6560L for firmware via Fastboot

Firmware for E6560T

Firmware 5.1.1 for DuraForce E6560T ENG / RUS from SergP2008

Firmware for E6762

Firmware 4.4.4 for DuraForceE6762 ENG
Firmware 5.1.1 for DuraForce E6762 ENG
Firmware 5.1.1 for DuraForce E6762 RUS from SergP2008

All firmware from SergP2008 collected together on Google Drive

Instructions

Easy way to get into fastboot mode on any phone
Instructions on firmware Kyocera DuraForce E6762 official firmware 5.1.1 with root and SuperSU in fastboot mode
How to disable carrier software in Android 5.1.1
How to enable USB debugging mode
How to log into fastboot
Another way to go to fastboot
How to overcome a binding to the last Google Account
If the device hangs on 5.1.1 while charging the phone is off

Recovery

TWRP Recovery 3.0.3-0 only for E6560
TWRP Recovery 3.0.3-0 only for E6560C Bell

Reviews

Review of firmware E6560 for Android 5.1.1
Autonomy of work

miscellanea

Aboot for e6762
Screenshots with android 5.1.1

There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedSergp2008 - 18.03.19, 21:04

Reason for editing: All firmware from SergP2008 collected together on Google Drive

[Max01031985]

No, I have not tried it. I wrote it many times and nothing happens. Processing the software.

[yuhrim]

Max01031985,I do not know. The update is swinging very slowly, two or three hours. But, if it is swinging, a progress bar appears in the blind.
When upgrading, X-posed and / or root should not be installed. Ideally, there should be a clean stock without any intervention.

[Max01031985]

Try to remove all the programs, something might work out.

[antoniomaniya]

[email protected], 14:17

Boys help upgrade to firmware 5.1.1 atoms I just can not figure out how to flash.

For DuraForce E6560, AT & T firmware 5.1.1 has not yet been uploaded, I myself am waiting for:

Sergp2008 @ 03/30/2016, 10:23

I'm only testing, after resetting the settings it becomes a brick, I will find the reason and then lay out

Post has been editedantoniomaniya - 31.03.16, 18:09

[Max01031985]

OK, thanks, I'am waiting.

[yuhrim]

Max01031985,I understand that in ABOUT THE TELEPHONE ->UPDATE SYSTEM ->CHECK UPDATE shows that there is an update? Otherwise, there will be a message that there are no updates.

[Max01031985]

I do not know tried a couple of times writing the same thing that I wrote.

[yuhrim]

Max01031985,Is the WiFi speed normal? Is the signal stable? Tried to wait a long time after this message?

[bioralf]

Everything with signals is good and with expectations.
While the device was on the drain, it poked the update button a hundred times and overloaded it and even att sim inserted zero sense.
Flies the same window.
Now, of course, it is no longer a sink, and the root and the hopper is the same inscription.
And by the way, so that she flew in, you only need to delete it, well, they wrote about it.

[bioralf]

By the way, this is what I think about why it does not arrive.
95% of phones purchased in Russia or somewhere else but not in the United States are contractual and simply unlocked, things like when there is a request to update the phone, it passes the server checks for contract maintenance. And there a penny is not paid up and our imei does not pass to the FOTA server. And for this we did not see the inscription that there is an update or not.

[b00zer]

I have an American phone, AT & T since birth and I don't care about the update.

[yuhrim]

Butanimation for our screens from Marshmallow.

Attached files

bootanimation.zip(5.57 MB)


Post has been editedyuhrim - 08.10.17, 23:18

[Max01031985]

Tell me how to enter the DuraForce E6560 menu recovery, I can’t enter in any way.

[yuhrim]

Max01031985,If the phone is loaded into the system, then the easiest way is to put a program like this:

Attached files

Quick Reboot (Root) .apk(1.07 MB)

[yuhrim]

Or using ADB command:

adb reboot-bootloader

If the system does not boot, then just catch the buttons:

Yuhrim @ 03/23/2016, 19:14

...
Put the phone in modefastbootyou can hold down the POWER + VOLUME_UP + BACK keys, and after 4-5 seconds, hold VOLUME_DOWN sharply.
If it does not, I wrote more about the buttonshereandhere...

[bogdan132]

I am overloaded if I do not let go of power + back and switch vol + to vol-.

[yuhrim]

bogdan132,Yes, you have to let go. For some reason I did not clarify this. Now I will add instructions.

[Sergp2008]

Android 4.4 firmware for DuraForce E6762
Stitched through fastboot:
1. You need to unpack the archive, preferably in the root of the disk
2. Turn on USB debugging and connect the phone to the computer
3. Installing drivers from the header
4. Run the batch file you need: Firmware_4.4.bat
We are waiting for the end and after the message appears:
To continue, press any key.
Press any key and the phone will reboot itself and start
If the phone itself does not reboot into the fastboot, then we reboot manually and repeat the steps from 4 points
The first launch can last up to 15 minutes.


Download

Post has been editedSergp2008 - 18.03.19, 20:50

[Max01031985]

Please describe how to install the firmware correctly, I can not understand the atoms.

Posted on 04/10/2016, 23:54:

I have a DuraForce E6560

[yuhrim]

Max01031985,just like byInstructions for E6762, Only take the firmware for your device.