[X]Assistant

[Sergp2008]

Kyocera DuraForce - Official firmware
Kyocera DuraForce E6762, E6560
Description | Discussion | Firmware пїЅ | Discussion Kyocera Torque (KC-S701) пїЅ | Kyocera Brigadier в„ў Discussion пїЅ

Drivers and Utilities

Fastboot utility
DuraForce 32bit Driver
DuraForce 64bit Driver
UniversalAdbDriver.zip(15.18 MB)

Firmware

Firmwares for E6560 AT & T

Firmware 4.4.2 for DuraForce E6560 1.102 AT & T ENG
Firmware 5.1.1 for DuraForce E6560 2.014 AT & T ENG NO ROOT LITE
Firmware 5.1.1 for DuraForce E6560 2.014 AT & T RUS from SergP2008
Firmware 5.1.1 for DuraForce E6560 2.014 AT & T RUS from Riznychenko
Firmware 5.1.1 for DuraForce E6560 2.014 AT & T RUS from Riznychenko - pre-translated

Firmware for E6560L

Net stock firmware on E6560L for firmware via Fastboot

Firmware for E6560T

Firmware 5.1.1 for DuraForce E6560T ENG / RUS from SergP2008

Firmware for E6762

Firmware 4.4.4 for DuraForceE6762 ENG
Firmware 5.1.1 for DuraForce E6762 ENG
Firmware 5.1.1 for DuraForce E6762 RUS from SergP2008

All firmware from SergP2008 collected together on Google Drive

Instructions

Easy way to get into fastboot mode on any phone
Instructions on firmware Kyocera DuraForce E6762 official firmware 5.1.1 with root and SuperSU in fastboot mode
How to disable carrier software in Android 5.1.1
How to enable USB debugging mode
How to log into fastboot
Another way to go to fastboot
How to overcome a binding to the last Google Account
If the device hangs on 5.1.1 while charging the phone is off

Recovery

TWRP Recovery 3.0.3-0 only for E6560
TWRP Recovery 3.0.3-0 only for E6560C Bell

Reviews

Review of firmware E6560 for Android 5.1.1
Autonomy of work

miscellanea

Aboot for e6762
Screenshots with android 5.1.1

There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedSergp2008 - 18.03.19, 21:04

Reason for editing: All firmware from SergP2008 collected together on Google Drive

[Sergp2008]

Firmware android 5.1.1 for DuraForce E6762
Stitched through fastboot:
1. You need to unpack the archive, preferably in the root of the disk
2. Turn on USB debugging and connect the phone to the computer
3. Installing drivers from the header
4. Run the batch file you need:
4.1 Run System.bat for system firmware
4.2 To switch from 4.4.2 to 5.1.1 run Firmware_5.1.1.bat
We are waiting for the end and after the message appears:
To continue, press any key.
Press any key and the phone will reboot itself and start
If the phone itself does not reboot into the fastboot, then we reboot manually and repeat the steps from 4 points
The first launch can last up to 15 minutes.


Download

Post has been editedSergp2008 - 18.03.19, 20:50

[yuhrim]

How to disable carrier software in Android 5.1.1
Those operator applications that were disabled in KitKat without any problems in the settings are no longer disabled in Lollipop. But this can be done with root access.
The phone must be connected via ADB. To do this, turn on USB debugging.
After that, the first time you connect via USB, the screen will ask for permission to debug from this computer. You can tick that this window would not appear the next time you connect.

Request for debugging via USB.png(55.13 KB)

In the terminal you need to dial:

adb shell
su

If this is the first ADB connection asking for superuser rights, a window will appear on the phone asking for these rights. Here daw it is better not to put, so that the next time the system requests it, it will automatically provide them.

Request superuser rights.png(35.22 KB)

Next you need to enter on the command line in turn:

pm disable com.amazon.mShop.android
pm disable com.mobitv.client.uscctv
pm disable com.digion.dixim.android.dmp.kyocera.q6
pm disable com.telenav.app.android.uscc
pm disable com.nqmobile.antivirus20.uscc
pm disable com.kyocera.runandbike
pm disable com.cequint.ecid
pm disable com.kyocera.hotspotshortcut
pm disable com.zed.TrdWapLauncher
pm disable com.android.cellbroadcastreceiver

This does not completely remove the programs, but they cannot be turned on again from the settings menu. They will not appear in disabled programs. To include some program again, you need to type in ADB before the package name:

pm enable

[yuhrim]

How to enable USB debugging mode
This item is in the developer menu. By default, this menu is missing. To enable it, you need to tap on the version of the assembly in the "about phone" menu:

Build version.png(20.54 KB)

After this strange ritual, the system solemnly announces that you are a developer)

You're just a genius! .Png(94.23 KB)

Now you have the "settings for developers" item in the settings menu:

Settings for developers.png(99.44 KB)

Everything, now you can enable USB debugging:

USB.png debugging(117.58 KB)

[yuhrim]

Home screen

Shutter

Blind with alerts

Extended panel switches in the curtain

Menu

Side curtain in the menu

Recent Applications

Lock screen

Post has been editedyuhrim - 19.03.16, 15:05

[Sergp2008]

To clean the DuraForce E6762 system, you can delete the following folders:

In the / system / app / folder you can delete:

AndroidPay, AndroidUpdate, Browser, CityID, com.mobitv.client.uscctv, facebook, HotspotShortcut, Momentum_signed, ToneRoom.

In the / system / priv-app / folder you can delete:

AmazonMobileShopping, CellBroadcastReceiver, dixim-android-dmp, MobileDataSecurity, YourNavigator

Post has been editedSergp2008 - 27.03.16, 21:37

[yuhrim]

Wallpaper with the elder brother - Brigadier

Wallpaper with Brigadier.zip(11.11 MB)


Post has been editedyuhrim - 21.03.16, 14:45

Reason for editing: Added by one archive

[bioralf]

All operator software can be disabled much easier than described above and not having root rights.
It is enough to turn on the debug mode on the phone, and put the DebLoader program and driver on the computer, start it and connect the phone.
Then a window will appear on the phone that trust this computer (it is better to put a daw so that you can disagree again).
In the debloader, 2 left bottom green lights come on (this means that the drivers are installed and working normally)
Then we press the top left button (scan), after which the full list of the program will appear, you just need to put a check on the program you want to disable
Then we press the applet in the same place at the top with a maiden.
All applications are disabled.
To turn it back on, that the same thing is only a daw.
BUT ALL THESE DISCLOSED ANNEXES WILL BE WITNESSED IN THE LIST (ALL APPLICATIONS) BUT THEY WILL NOT WORK AND FOLLOW-UP.

Posted on 03/23/2016, 2:12 PM:

And where to get the firmware for ATT E6560?

[yuhrim]

bioralfnot debloader, aDebloaterfrom the word"bloatware".
Regarding the firmware for E6560: Sergp2008is doing this now. I understand that you are interested in Russified Lollipop?

[yuhrim]

Self-extracting archive withfastboot:
fastboot.exe(657.96 KB)

[yuhrim]

Instructions on firmware Kyocera DuraForce E6762 official firmware 5.1.1 with root and SuperSU in fastboot mode

1. Download and installdriversaccording to the bitness of its OS:for windows 32bitorfor windows 64bit, universal driver for ADB,andforfastboot
   
2. Download and unpackfastboot.
   
3. Download and unpackfirmwareto folderfastboot.
   
4. Put the phone in modefastbootusing a combination of pressing the physical buttons (to do this, hold down the POWER + VOLUME_UP + BACK keys, after 4-5 seconds release and hold VOLUME_DOWN sharply - or with the help of ADB command:
   
   adb reboot-bootloader
   
   If it does not, I wrote more about the buttonshereandhere.
   
5. Open command line, go to folderfastbootand flash the sections in turn with the commands:
   
   fastboot flash boot boot.img
   fastboot flash recovery recovery.img
   fastboot flash modem modem.img
   fastboot flash system system.img
   fastboot -w
   
   
6. Reboot the phone with the command:
   
   fastboot reboot
   
   
7. Wait for the system to boot (up to 15 minutes).

You can flash both over KitKat and from the state of soft brick.

Post has been editedsnekt - 24.11.17, 22:13

Reason for editing: the rules of the section "Android - Firmware" p.3.10.

[bioralf]

Android 5.1.1 firmware for DuraForce E6560 AT & T

I would like to clarify the build number.
Although she was there in my opinion only one was.
By the way, there was no opportunity to include 3-2g.
And then this 4g icon forever burning is already beginning to annoy))) and the battery sits down well because of 4g constantly working.

[bioralf]

As for the Russian is not necessary. I just have one of the first firmwares in general, and there are only 4 of them. For this, I wanted something fresh, and the Lolipopka should be more economical.

[yuhrim]

bioralfHas the machine already arrived?

[Sergp2008]

Already on the ATT website they write that there is an update, but so far it does not fly to the phones.
As soon as I post it here

[bioralf]

Sergp2008 @ 03/23/2016, 9:06 PM

Android 5.1.1 firmware for DuraForce E6560 AT & T
Stitched through fastboot:
1. You need to unpack the archive, preferably in the root of the disk
2. Turn on USB debugging and connect the phone to the computer
3. Installing drivers from the header
4. Run the batch file you need:
4.1 Run System.bat for system firmware
4.2 For full firmware launch Firmware_4.4.2.bat
We are waiting for the end and after the message appears:
To continue, press any key.
Press any key and the phone will reboot itself and start
If the phone itself does not reboot into the fastboot, then we reboot manually and repeat the steps from 4 points
The first launch can last up to 15 minutes.

FIRMWARE ANDROID ROOTKIT 23 VIRUS

[yuhrim]

bioralfThis is the same virus, because of which Sberbank swears - root is called ;-)

[fil]

M

We move to subsectionпїЅOther brands.

[yuhrim]

bioralfatSberbank branchWrite how to use the program on the device.
You can try to remove rootby thisorby this.

[bioralf]

6752 will be delivered ?? At 6550
Thanks for the instructions in the evening I will try

[Sergp2008]

bioralf
You can bet from 6762, if you fail to start, you can go back to 4.4.2
Only need to sew boot, rekoveri and systems
But there is also a root

Post has been editedSergp2008 - 25.03.16, 16:41