Good time! I ask for help in the firmware. Stayed weekly 8.5.10. All the time flew the region to China. I decided to reflash through mythlesh. As a result, hanging on the icon. I stitched the TVP with the cleaning of the date and other sections besides the OTG. PC does not see the body. I tried both modified and original. No result. Mounting in mount cost cache and date, MTP mode is activated. I tried an alternative method via ADB (the unpacked firmware threw into the adba and launch Flash All). Hanging on the mi icon. Where else to dig? For two days already tempted the forum.

InstallthisTWRP, from it: cleaning, bottom right - Format Data through Yes, reboot to recovery. (Wipes are no longer needed). All internal memory will be cleaned !!!.

Got it, ATP.



And the last version and this was put through the recovery. In both of the same problem.

Guys sorry but faded! How to install an update? Installed TWRP and MAGISK. Firmware official 8.5.10 MI5

Post has been editedvaz146 - 20.05.18, 09:47

Does not see just like adba android

What does not see? From your TWRP install.

[QUOTE NAME = "VAZ146" DATE = "20.05.2018, 09:23" POST = 73462256] The guys sorry but faded! How to install an update? Installed TWRP and MAGISK. Firmware Officer 8.5.10
I got a mistake with magic. I installed first anew 8.5.10, then I sewed a new one immediately, then anew the TarP and Magisk.

That's through TVP and install, firmware, immediately Magisk and only then into the system. Wipen only Keschi.

I selected TWRP (from the above) formatted DATA, reboot into the recovery. In the device manager, only Android Devices, I can not throw the firmware into the body. All caches were cleaned.

Post has been editedtofikru - 20.05.18, 10:35

Go to the TVP and the computer will see the memory.

Hello everyone! I stitched 8.5.17 on 8 android. Problems appeared, somewhere something sore rose. Google Account does not connect. But now I can not make Vaipa in TWRP, nor set anything. Sections are not connected, the date, respectively, does not see. It is said that everything seems to be all because of Magisk installed. How now to flash? What to do?

Post has been editedkaznacheyvandal - 20.05.18, 12:04

Here isSo.

Yes, you have encrypted the DATA section, is treated only by the format.

Instructions for raising bricks with QFIL

Those who for not understandable reasons are not restored by the phone from the state of the brick, I can recommend the excellent QFil progration included in the QPST package. In the top line Select Build Type put a tick on Flat. In the Select Programmer row, click Browse and specify the path to the file in the prog_ufs_firehose_8996_ddr.elf firmware (you specify all files in the window), then click Load XML and select RAWPROGRAM0. Click the download button and wait for the end of the firmware. Who is not difficult, test the way, at one time he restored the devices. On our, too, must come. The device must be in EDL mode. To do this, closure contacts on the board or enter ADB. The firmware device via QFIL should be visible in the device manager as Qualcomm Hsusb Qloader 9008. I will be glad if my instruction will help). IMPORTANT! Allow USB debugging!

By the way, I almost forgot, to those who had to have had any QCN backup or downloaded it from the instructions for restoring the modem. And QPST does not want to fill it, then it is possible to sew it to the same QFIL over the QCN RESTORE tab (personally checked).
If it is not clear, write in the LAN. I will help with all I can. Also, I will also help to restore communication on the apparatus, none of the ways helps, I think to carry it into repair .... Permanent donned the coarse, sometimes it does not catch the day at all that I didn't do it ....



Post has been editeddraiv88 - 21.05.18, 15:39

I'm stupid, but where to take Masik firmware?

nobless2 , Xiaomi Mi5 - Miui Firmware (Post Kirhe # 73314671)

nobless2 , in the header, copyright firmware Xiaomi Mi5 - Miui Firmware (Post Staseg-Preved # 72879062)

Guys, tell me how the system folder is files or folder with the gallery cache files. In general, the topic such that the gallery on the global stable firmware found half of all the pictures that there are and stupidly stopped looking for them, although in any third-party galleries and file managers everything is perfectly visible. Clearing cache through the settings does not help. I do not want to make a full reset. How to make the gallery re-search all pictures?

Post has been editedGamecube - 20.05.18, 19:02

Firmware 8.5.17
Recently, only on the OT has been updated. But where are the wallpaper carousel settings now? Previously, on a wall in the upper right corner it was possible to click and you got into the settings. And now I do not find in the menu, nor on the walls themselves. Maybe it was changed for a long time, just switched from the firmware in my signature

Hello everyone! Please help sort out?
I bought the MI5 phone stable 9.5.2. 3G mode does not work on any SIM card. 2G and 4G work and 3G does not find the principle. There is exactly the same phone. There everything works perfectly and there is no (I tried to drop on zero. It does not help.

Once again I'm trying to flash on a new weekly (weekly)
Full Rom version 8.5.10_b22 (MIUI 9) and again wrote that MD5 file was not found that I did not do it - this seen without problems