> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Xiaomi Mi 5 - MIUI Firmware



Rep: (1875)
Xiaomi Mi 5 - MIUI Firmware
PictureGemini
Description | Discussion пїЅ | Purchase пїЅ | Accessories пїЅ | Marriage пїЅ | Catalog of topics for MIUI v6 / v7 пїЅ | Xiaomi club пїЅ | Club owners Xiaomi Mi5 пїЅ | Discussion camera Xiaomi Mi5 and Mi5 PRO пїЅ | Mi Account пїЅ | Android Pay does not start пїЅ | Configure Notifications пїЅ | Power consumption (autonomy) пїЅ | Modification and decorations пїЅ | Bootloader unlocking пїЅ | Unofficial firmware пїЅ | MIUI firmware пїЅ


FAQ

Important information!
Is it possible to roll back after 3 points - Answer: NOT


Drivers and Utilities

Firmware



All pictures under the spoilers are clickable.
Official(MiFlash (fastboot) and Recovery)

Official downloads page on en.miui.com (fastboot)

MIUI AM Android 8.0 (MIUI 8.4.27 )
MIUI AM

Weekly (◄ • weekly, EN-CN • ►

To install from Recovery:
Picture Full ROM Version 8.5.24 (MIUI 9)

To install from Fastboot:
Picture Full ROM Version 8.5.24 (MIUI 9)

Global Weekly (◄ • weekly international, Multilang • ►

To install from Recovery:
Picture Full ROM Version 8.11.22. (MIUI 10)

To install from Fastboot:
Picture Full ROM Version 8.11.22. (MIUI 10)

Stable (◄ • stable, EN-CN • ►

To install from Recovery:
Picture Full ROM Version V9.5.2.0. (MIUI 8)

To install from Fastboot:
Picture Full ROM Version V9.5.2.0. (MIUI 8)

Global Stable (◄ • stable international, Multilang • ►

To install from Recovery:
Picture Full ROM Version V10.2.2.0 (MIUI 10)

To install from Fastboot:
Picture Full ROM Version V10.2.2.0. (MIUI 10)

◄ • Old firmware • ►

Localized(TWRP only)


Miui Hellas 9.7.18
Miuitr 12.0.1.0 Port.
◄ • Xiaomi.eu (Multilang • ►

Download page onxiaomi.eu


Weekly
Picture Full ROM Version V9.9.26. (MIUI 11)
MD5: ae88223e2150a640aa8cabae035aedd5

Stable
11.0.2.0


◄ • MIUI MIRUM • ►

Download page on MIUI MIRUM


Weekly
PictureFull ROM VersionV8.11.22. (MIUI 10)
MD5: 2d8f24705e35c25e618da3a3d338b184

Stable
DownloadFull ROM version V10.0.1.0. (MIUI 10)
MD5: 239c049f64d5e6fb1927b75c1ba58a0c



Copyright(TWRP only)
MIUI 12 Android-based 9th

Xiaomi.eu of Hellas
Download page

Weekly
DownloadFull ROM version V8.11.22. MIUI 10
MD5:

Stable
DownloadFull ROM version V9.5.2.0. MIUI 8
MD5: 49724096bbee4318279448218d827716

MIUI by Staseg-Preved
malchik-solnce (MS

Weekly
DownloadFull ROM version 8.11.22. MIUI 10 Yandex
MD5:

Epic rom



Create your perfect CAM firmware
Firmware in the cloud

Do not hesitate to thank the authors for providing cloud storage!

MIUI 11
Shortcuts
Firmware for phones with blocked Mi Account


Instructions

General instructions for newcomers to the firmware Xiaomi Mi5
Small FAQ Step by step for those who have just received a phone
Recovery after not successful upgrade

We are going through the unlock on Global Stable V8.1.2.0

Installing Custom Recovery:
Basic firmware instructions withbehindlocked bootloader:
Basic firmware instructions withtimelocked bootloader:
ROOT rights
Installing GAPPS:
Modems
Core
Other instructions:

Utility

The results of past surveys
Attached Image



Administration Decisionsavagemessiahzine.comon banning posting and discussing Miuipro content




There is no curator in the subject. For questions about filling caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links.
If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).


Post has been editeddraiv88 - 27.12.20, 14:43
Reason for editing: Miuitr 12.0.1.0 Port



Rep: (6)
The problem happened, put the latest firmware from Hellas Standing, I wanted to install Super SU through the TWRP (and then the binary file did not see the phone at the startup), but I go into the recovery and it translates into reading mode, no files can be seen, encryption did not stand that Sometimes to do? Version 3.0.2.0 TWRP

Post has been editedelkun - 24.11.16, 16:11



Rep: (4832)
Updatedassembly.



Rep: (4)
Guys, tell me, on the firmware v8.1.3.0. EDL does not work, everyone has it? When transferring to the mode, the phone is turned off and on the screen immediately lights up and loading starts. I tried through ADB and through FastBoot, no difference. What to do?

Post has been editedSergex - 24.11.16, 22:12



Rep: (1446)
Sergex @ 11/24/2016, 22:09*
... what to do?

What do you want to do? Unlock the bootloader and do everything you want.

Posted on 11/24/2016 22:30:

Neistribimiy @ 11/24/2016, 22:27*
I do not understand updates on MI 5 will not be before the output android 7?

They wrote that from the Kluckom firewood to ride and for a week suspended the output of the firmware - test.



Rep: (2)
Who can help?
Need files from this instruction
"For those who flew the modem after the firmware, restore the backup, and IMEI on the spot (the modem is" unknown "). All manipulations are made on the phone with a unlocked loader and without SIM cards.

It will take:

ADB driver (better lay down the folder in the root of the disk C)
File non-hlos.bin from the firmware of your version (located on the path of the archive with firmware / firmware-update / non-hlos.bin)
Backup work sections Modemst1, Modemst2, FSG (if you do not have, you can ask for any of your comrade, it will not be IMEI) it is done so (I need a root) - Route commands window from the folder with ADB drivers and write the following commands:
adb shell
su
dd if = / dev / block / sde28 of = / sdcard / modemst1
dd if = / dev / block / sdf3 of = / sdcard / modemst2
dd if = / dev / block / sdf5 of = / sdcard / fsg
Modemst1, Modemst2 files, FSG will appear in the phone's memory
SuperSU (if not installed) "



Rep: (1)
dweller150769 @ 11/25/2016, 15:18*
Thoughts ended, please help.

Smoke instructions about the engineering cable.


Already smoked. Made. Determined as COM10 (and then 20,30,40,50 - I tried all ports). With all Miflash (naturally, including from the header), which I found - issues an error: "Cannot Receive Hello Packett, Miflash IS Trying to Reset Status!" or CAN not read from COM10 (on another version). And that's it. The dispatcher decided as necessary - Qualcomm ... 9008 (COM10). Fire signatures are disabled, launched from the administrator, Windows 10 x64.

Thoughts finished again.
Again I ask for help.



Rep: (1)
AlexPashenko @ 11/25/2016, 16:49*
Previously, for firmware in EDL, the file one was added to the firmware, look in the header. Or put some 7.2.9.0, and then by air update


I tried it right away. I can not log in in EDL. He writes that the phone is locked. Only with engineering cable.

Posted on 11/25/2016, 13:55:

Yes. And I tried this file. Also failed. Also wrote that the phone is locked.



Rep: (334)
MIB383 @ 11/25/2016, 21:09*
Is it sense? If at the first stage of connection with the phone fails.

In hismanualAs indicated: Important: 1. Use a proven Xiaomiflash-beta (in the header link);
2. Be sure to set a mark in the Miflash "clean all".
The most typical error, during the firmware through the cable, most likely - is not marked in the Mifle "Clean All".
Those. The system is trying to communicate with the device to save the DATA section and it leads to a starrow.

Post has been editedAnatolDv - 25.11.16, 14:39



Rep: (1)
Draiiv88 @ 11/25/2016, 17:58*
Support Anatoldv,. We look and what gave a search.


As I understood, this is done through the recovery, and the custom. I have no to him.

Access only to FastBoot and EDL through an engineering cable.

Posted on 11/25/2016, 15:01:

Yes. And the body is locked.

Posted on 11/25/2016, 15:05:

Post has been editedmib383 - 25.11.16, 15:13



Rep: (1875)
* MIB383,
I can not log in in EDL. He writes that the phone is locked.

As far as I understand, I don't need unlock for EDL.
You may have problems with installed drivers.

Post has been editeddraiv88 - 25.11.16, 15:19



Rep: (1)
Draiiv88 @ 11/25/2016, 18:19*
As far as I understand, I don't need unlock for EDL.
You may have problems with installed drivers.


With drivers, everything is fine: compliant instructions.

On this MI5 - the OEM EDL command does not work - it writes that the bootloader is locked. But! I can get to the engineering cable. But there are other problems ...

AlexPashenko @ 11/25/2016, 18:22*
Are you trying to lie down in the firmware?

Where can I find it. I really doubt what helps, but to calm the soul - I will do.



Rep: (334)
MIB383 @ 11/25/2016, 22:00*
As I understand ...

HonorHEREFrom the beginning and on the fifth item, then -2nd way.
MIB383 @ 11/25/2016, 23:02*
Where can I find it.

Link.

Post has been editedAnatolDv - 25.11.16, 16:11



Rep: (1446)
Anatoldv @ 11/25/2016, 16:04*
Read the 2nd method here.

He has no recovery (the phone does not load it), he has no debugging on Sibbie and does not load into the system, so it will not work for him to work.



Rep: (1875)
Make backup / restore EFS.


RequiredAvailability root..
Install / run "Terminal emulator"And gain there:

For backup
- UserData -
su
DD if = dev / block / sda14 of = / sdcard / efs.img

--------------------------------------------------------
- System -
su
DD if = dev / block / sde39 of = / sdcard / efs.img1

---------------------------------------------------------
- Boot -
su
DD if = dev / block / sde36 of = / sdcard / efs.img2

------------------------------------------------------
- Cache -
su
DD if = dev / block / sda13 of = / sdcard / efs.img3

-----------------------------------------------------
- Modemst1 -
su
DD if = dev / block / sdf3 of = / sdcard / efs.img4

------------------------------------------------------
- modemst2
su
DD if = dev / block / sdf5 of = / sdcard / efs.img5


Recovery
- UserData -
su
dd if = / sdcard / efs.img of = / dev / block / sda14

----------------------------------------------------------
- System -
su
dd if = / sdcard / efs.img1 of = / dev / block / sde39

-----------------------------------------------------------
- Boot -
su
dd if = / sdcard / efs.img2 of = / dev / block / sde36

------------------------------------------------------------
- Cache -
su
DD if = / sdcard / efs.img3 of = / dev / block / sda13

--------------------------------------------------------
- modemst1
su
dd if = / sdcard / efs.img4 of = / dev / block / sdf3

--------------------------------------------------------------
- Modemst2 -
su
dd if = / sdcard / efs.img5 of = / dev / block / sdf5
________________________________________________________________
After a backup, you have a file / s file with the name of the backup made by you.
For example:If you made Modemst1 backup, the file will be called EFS.img4, etc.
If for any reason you moved your backup, then when restored, you need to specify the path to it.
Important: If you do backup EFS (and this is one of the important sections), then it is necessary to restore it on the same modem on which backup was made.
Otherwise, you will fly modem and IMEI.
Attached Image


Post has been editeddraiv88 - 27.12.16, 00:41



Rep: (944)
It's all strange. The command for System, Boot and Cache seems to be different, but the file name is the same. So, in theory, each next team will overwrite the previous one. Or all these created efs.img will be different?

That's exactly what I still do not understand. Blocks are different. But they are written to the same file name. In Windows, such teams are 100% will be condensed. But in NIX-systems, I do not know. Enlighten if you know.

Post has been editeddraiv88 - 25.11.16, 22:47
Reason for editing: Uniting posts.



Rep: (1875)
* SG3000,
Your truth, made amendment.
Attached Image


Post has been editeddraiv88 - 25.11.16, 22:52



Rep: (1087)
* Trueno999
It is good that the brick did not get even, with a locked loader. You shouldn't think about any EDLs, unless the ing cable brand. There is a concept of China to China, global on the global when upgrading through three points. China on the global or vice versa is not possible. You only need to unlock the bootloader (there is a topic) on this firmware to do and then without hardly flashing anything.

Post has been editedflexible1126 - 26.11.16, 06:45



Rep: (2)
I can not restore EMEI, after editing the Simple-MI 5 file, it refuses to flash. Sew left imei.
Who can make me a file to restore or help with this



Rep: (2)
Hello guys

Really used the forum and stitched its phones. Now I have mi5 unlocked. I decided to put myself my native firmware along with OTA
That is, the phone has already been unlocked. There was a native 7 ... and TWRP 3 ... I don't remember exactly the versions. Complimentary on the computer stood the driver in the headbut phone easily enters.

What I did now. Installed the last Miflash, dug up in his archive Gemini_Global_images_v7.5.2.0maamide Global firmware and flashed. Mi Flash stitched and at the end wrote success
As a result, the Mi COM logo is burning and that's it. Does not turn on.
I still goes to fastbut, but now it refuses to flash. Either the Windows Miflash error and the prog closes, or it flashes instantly and writes success.
When firmware, Clean All, Clean All, set.

In the recovery, the volume button does not turn out. I tried to install through the fastbut recovery again, got a mistakehttp://joxi.ru/8anp41ptva77mo.

Tell me that this is not a brick and I don't need an engineering cable. You are welcome! : thank_you:



Rep: (5)
In general, the problem. Made a backup via TWRP, I was glared on CM 14.1, I liked the day, I did not like it, I wanted back to Mua, made wipe, restored a backup, made earlier, booted, no modem and sim cards. Then the instructions restored IMEI and the modem, the sim card sees, the modem sees, but there is no network. And after the recovery of IMEI Meid in the phone and do not match the box, maybe this is the case?
P.S. Before that, sitting on weekly MIUI SU

Post has been editedMbDimas - 27.11.16, 09:38


Full version    

Help     rules

Now: 13.01.21, 22:25