Instructions to update the firmware through localized TWRP:
1. If you update the firmware from the same localizer (data, applications and settings are saved)
• Download the archive with a new firmware to the phone (I do not unpack the archive)
• We go to TWRP, press "cleaning", "selective cleaning" and select the sections for cleaning "Dalvik / Art Cache" and "Cache". We make swipe to clean the selected sections. Returning back
• Click "Installation" and choose the firmware you need. We make swipe to start the process
• If after the upgrade is offered to clean "Dalvik / Art Cache" and "Cache" - do, it will not be worse
• Reboot to the system
2. If you go to the firmware from another localizer or with a stable on the development and vice versa:
• All the same is done in the first paragraph, only it is desirable when selecting sections to clean up, select the "DATA" section (Applications are deleted)
3. The most powerful cleaning
• To the first two items, you can make "format the data" and add to the cleaning "Memory of Device" and "System", but in this case you will need to reboot again in the recovery and then throw the firmware into the phone or use OTG. This method clears everything that is possible to clean through TWRP.
Before all manipulations, we make backup.
Regarding Weipov, it's not worth it, you can do but you can not do ... I can say that it can and successfully move from different localizers, and even at the same time with a stable on the development only with Wipe Cache and Delwick and everything works well, but It happens that from the same, without errors without wipe, the date does not go. In general, what wipes to do, solve you. Here I brought only the recommended, not obligatory.
Post has been editeddraiv88 - 31.08.16, 11:15