With Multirom, this option does not roll, I have long checked. Embroits the app, even if from "System.New.Dat" make "System.img".
Only with the installed pull, who needs.

I expected a similar question.


At one time I was very helped.
Suitable for both Android 5th and 6th.

Post has been editeddraiv88 - 27.08.16, 19:28

Best program
Multirom firmware unpacks without problems.
We click on the 7 and select the unpacking plugin, then transfer the system.New.DAT into the program window and press the entry. Read the instructions there in detail.

Post has been editeddrnik976 - 27.08.16, 23:05

1) I meant that now the phone is half a trich, and no matter how much important thing is how it happened, most likely from som 10 (but it is IMHO)
2) No, wrong if the bodies do not load, the unlock will not make most likely (but if it comes to the fast-headed, I do not know if honestly) if I did Anlok, then the EDL is no longer needed, no, no, not, with the unlock We need an engineering cable, it can be sewed through the mythlash, but in your case it is unnecessary, now it is necessary to sew with an engineering cable, without anoslets EDLs, etc.

HomeWell,
In the new firmware, it was closed and abut to return it, as well as removed the necessary for the hard file. When the firmware, I had to jump out the error, but the process somehow crooked this moment, could be due to the Loca option. After the log should not be sewn from fastboot without a repeated unlock, but again something went wrong, possibly due to the first jamb. In general, all this was imposed and in the end the crookedly the firmware simply stopped loading.
I would advise you to restore through the suite, unlover and sew a Chinese stable with full cleaning through the fastbut, and then choose to taste.
PS: I did not watch that the fastbut does not go. Once there is no access to the fastbut or recovery, then only through a testpoint or an engineering cable and something to sew for recovery, because These are the methods of physical inclusion of the mode and not all firmware for it are suitable.

Post has been editeddweller150769 - 29.08.16, 00:45

anabolicwindow , Updated on 8.0.2.0 from 7.5.2 through three points. The loader is blocked. There are absolutely no problems. Their advantages earned NFC payment. While everything works. The network is not falling off. GPS catches. In general, it is still very pleased.

UnforgetX,

All drivers must be installed on the computer on the instructions from the header, the last Miflash from the header. Folderadb Cock the root of the disk from: downloading TWRP-3.0.2-3-Gemini.img throw it into the same folder adb . Download firmware at the moment for miui 7 extreme China Stable ROM V7.5.9.0 Maacnde try this link http://en.miui.com/for...9220&highlight=7.5.9.0. For fastboot or well-proven itself according to a dilapidated participant of the forum AlexPashenko Global firmware Global Stable v7.2.9.0 maamidc Unpack until full disclosure and throw the folder with the firmware in the root of the disk C: download the ZIP firmware for the recovery from localizers or officially global to choose from.
Thanks to the distinguishing opinion of the participant in the forumdweller150769 It is recommended to eliminate the bug, reflashing first through the Miflash from the Chinese on the global or vice versa, depending on what you currently have a firmware with a bug. Both distinctive firmware for jumping through fastbut, above are indicated. After, or we flash the SWRP and then we flash the necessary firmware for the recovery, or without a firmware of the TWRP, we flash through the mythlash the necessary firmware for fastboot to your discretion. And after necessary, you can flash the TVP.
So:

1. The charge must be more than 50%
2. Throws all the necessary information in a computer, it's photos, music, documents, etc.
3. Turn off the phone
4. Open the folderadb we press the button Shift On this window in an empty place and the right mouse button
5. Select in the window that appearsOpen command window
6. The phone is translated into the FastBoot mode (the button rocker down and the ON button and connect the phone to the computer, be sure to the USB motherboard for stationary computers.
7. Tell the teams window
fastboot devices
if everything is successful
8. Run the programXiaomiflash. On behalf of the administrator (Miflesh is on the disk with in the Xiaomi folder)
9. Pushselect Select the desired firmware from the disk C (folder with unpacked China Stable v7.5.9.0 for fastboot or well-proven Global Stable v7.2.9.0 for fastboot)
10. We put a tick onclean all
11. Pressrefresh And the phone must be determined.
12. Furtherflash and must go the process of firmware.
13. Phone after the firmware automatically reboots and long reboot the phone from the computer is not disconnected.
14. Once the phone starts, at the initial start, during the selection of the language and everything else, turn off the phone with the on and then turn the firmware of the TVP.


15. We again go to the commands window, we translate the phone to the fastbut mode, type or highlighting all commands below, copy (Ctrl + C) insert them into the commands window clicking (Ctrl + V)
fastboot devices
If the fastbut was determined successfully, we recruit
FastBoot Flash Recovery TWRP-3.0.23-Gemini.img
After the successful sewing of the TVP, then we gain
FastBoot Boot TWRP-3.0.23-Gemini.img
16. Phone reboots in TWRP
With the output of Android 7.0 recently added !!! If you then want to flash global on the basis of android 7.0, then throwing a modified TVP into the body ZCX-TWR-3.0.2-X-7.0.img , It is necessary to install (flash) it from under the installed TVGP and make a reboot into the recovery. At the first entrance, the aliens will hang for a long time, do not worry wait and further you can flash such a global.


17. Turn off the phone from the computer, choose the language in the TWRP and do
Swipe (>>>Swipe to Allow modifications) Drech him to the right
If the phone screen is blocked after idle in the TVG mode, you climb the power button, the screen turn on and the subsequent such swipe will help unblock it.
Reboot
Recovery (Recovery)
18. Next,
Purification (Wipe)
ATTENTION!!! Next, lose all memory, information on the phone and the previously installed system
Format Date (FORMAT DATA)
We write in the window that appears
yes
Swipe
19. Let's go back a button< In the main menu
20. More than once
Purification (Wipe)
Selective cleaning (Advanced Wipe) And put ticks for all (Dalvik / Art Cashe, Cashe, System, Data, Internal Storage) except USB-OTG
Swipe
21. Let's go back again back the button< In the main menu
Reboot
Recovery (Recovery)
22. Connect the phone to the computer
23. We throw the necessary firmwarezip For the whole recovery, without unpacking into the root of the phone
24. In TWRP, choose
Install and choose the firmware thrust zip And do not put a dawny anywhere
Swipe
25. The phone is stitched after the firmware
Cleaning Delwick / Cash (Wipe Delvik / Cashe) (the fact that below)
Swipe
Reboot in OS (Reboot OS)
26. Long reload, do not worry, wait ...

The instruction will need to study the beginners, thank you for the ideaAlexPashenko and dweller150769 , That's all, rejoice ...


Post has been editedflexible1126 - 19.05.17, 01:52

Finally arrived, 8.0.2 global. Put, while I like everything, the main modem works significantly better with WiFay, and with a mobile network and with data transfer. Heaven and Earth compared to 7.5.3. The only bug found, some kind of dance with a tambourine need to move the notification icons as you want. Then cling, then no, and I can not understand the principle yet .... Otherwise, everything is fine, the curtain in the 8-ke, on my subjective look, although much more concise, but more convenient, there are the main switches for most of the force 4- 5. On autonomy, it is too early to judge early, but in an hour the consumption is about the same, Aki at 7.5.3.

MIUI 8 Global Stable (miui_mi5global_v8.0.2.0.maamidg) Cloud Mail.Ru
Fastboot

Recovery

xiaomi.eu_multi_mi5_v8.0.5.0.maacndh (recovery)

I also arrived 8.0.2.0, I did not make any discharges, everything works, but one glitch appeared - the bluetooth headset with the machine after turning on the headset is not adapted. Can anyone check - it's about firmware or you need to just do wipe?

8.0.5.0 from Xiaomi.eu everything works. And bluetooth too. Buttons settings work

We go to the settings / about the device and look at the modem.
If in the modem, anything is not spelled out. This is the reason for the connection of SIM cards.
You need to flash modem or reinstall the firmware.

In general, I found out an experimental way for some of some after the upgrade to 8.0.2 may not be loaded, and hang on the inscription android and blinking the screen, run 3 points - this happens if you have been frozen Google's services, music, photo, disk, etc. perhaps some one of them, but I didn't have patience so many times after each frost to reboot the body) if they were frozen and you decided to roll without defrosting their OTA, the body will not load it already, you will have to fully read and deliver Naked 8.0.2. If, after installing the firmware, you loaded and discouraged to freeze the services of Google, after rebooting the body will not load and again it will have to sew it from scratch. In any case, I just happen when I froze, I will continue to dig.

Post has been editedGagarinbd - 29.08.16, 18:40

And I tried to change the modem, and in the end I downloaded the same firmware (8.0.2.0 Maamidg), I was shifted, the modem is displayed, the network is still no.
In IMEI information, it writes that ordinary IMEI is both, but IMEI SV both displays like 00

C1x1x,
Thinking to someone call his portrait will not be displayed in full screen (and it is not necessary for anyone, it is impractical) but only in a small mug, but the portrait of incoming calls should be displayed on the full screen (it is advisable, since from far you can see who calls) if you are in Contacts in each contact first put the screen of the contact portrait of a somewhat kilobyte and not a photo that weighs into several megabytes. Since it weighs a lot and gmail mail simply will simply be ascended to sync it. Imagine millions of people want to invest in large sizes, each there is about 100-300 soul contacts, it is average. This is the problem of not displaying contacts. This is my personal observation, since after flashing photos of contacts nested with large sizes are not displayed as it is necessary. Something like this...

Post has been editedflexible1126 - 29.08.16, 20:23

Xiaomi Mi5 - MIUI Firmware (OS 6.0) (Post Yuandrey # 48709141)


To you in this topicUnlocking bootloaders

Post has been editeddraiv88 - 29.08.16, 21:11