PFIZER004,
In the SYSTEM folder, the build.prop file, find the line "persist.camera.hal3.enabled = 1" and change the number 1 to 0.
Of course, the root of rights and any text editor with root rights are needed.

I also noticed that the swipe does not work left to go to the number of the number .. the printed shorter

Post has been editedCappelan - 24.07.16, 17:36

What version of Miflash sew?

Well, what you want, then think) there is a complete nonsense at all) put it with all the wipes, and tried on different TVs. Where is swipe left then?)
Have you updated from above or tried, by the way?


Post has been editedCappelan - 24.07.16, 18:30

Smart tried to overload?

Post has been editedVladGordey - 24.07.16, 18:43

Cappelan,
Well, you gave a comrade. In vain sewed)) In the setting of the lock screen, go, label Select and you will be joy

Posted on 07/24/2016, 18:48:

znpp,
Leggo, click on it and back Return. Close the curtain and back open

Post has been editedAlexPashenko - 24.07.16, 18:48

Prehistory. After different samples and torment, I could not set the new official TWRP V3.0.2-1. No tips helped. I decided to clean my phone to the state of the glass and see what it will be. There were suspicions that something was left of the old firmware in the system. Initially, the Chinese self-mounted V7.3.4.0.0 was stood with the return of the EDL on the mod. Ishive Miflash_xiaomi.eu_gemini_v7.2.13.0.maacndb_6.0_mod from Anatoldv via Miflesh C Clean All, then I was firmaged by the global v7.5.1.0 updated on OTA Global v7.5.2.0, dislocated on it without problems, but the TVP could not be installed in any way. I reflash back to the same mod. Climbing with the engines of TWRP v3.0.2-0, after the recovery, I installed firmware for the recovery from Xiaomi.eu v6.7.14 and further v6.7.21. Well, no new TWRP did not want to be installed, I tried it through the fastboot and through the recovery, there were no options left. Reinstalled the old TWRP V3.0.2-0 through the fastbut and decided the problem. So here are my actions:

1. charge more than 50-60%
2. Made a local backup through the phone settings. Advanced settings and reset-local backup-create backup.
3. Completely copied the entire memory of the phone to the computer, in order not to lose any information.
4. Disconnect the phone from the computer.
5. Overbilled in TWRP v3.0.2-0
6. Cleaning
7. Format DATA and SVIP (all the data will be paid from the phone), everything was cleared to the end, the operation was successful.
8. Since it was not possible to reboot in the OS, and the systems are no longer no, then from this state, brazenly rebooted into the recovery (immediately it immediately snapped the POWER button and the volume swing +).
9. The phone rebooted into the recovery and pressed for cleaning
10. Select cleaning options, put ticks for Dalvic, cache, systems and swipe.
11. Returned button< Back to the main screen of the recovery.
12. Connected the phone cable to the computer.
13. I found my MI5 phone on the computer, went into the phone's memory (there, except for an empty folder, TWRP is nothing), I threw the archived firmware for the Xiaomi.eu_multi_mi5_6.7.21_v8-6.0.ziphttps: //www.androidfil...? FID = 24591000424948947
In this firmware inside already sewn new off TWRP V3.0.2-1
14. Next, click on the phone Install (Install)
15. Chose the firmware thrust and installed.
16. After installation, cleaning cache / Delwick Svile
17. Restart in OS.

On this, everything is rebooted into the clean system as glass, we enter all the data of the new start again, we connect the WiFay, the myakucleant is activated, etc.

18. From a pure state, go into the recovery and here the joy, in TWRP v3.0.2-1 comes without problems.
19. Reboot, connect the phone to the computer and throw it out from the computer from the old data clause 3. So far from the MIUI folder folder Backup in the phone's memory in the MIUI folder.
20. We restore the entire system through the adjustment-recovery settings and reset-local backup-click on the old backup and restore. Next, at your discretion, you can throw the necessary information from the old data with clause 3

That's all, use.
I want to say, thank you so much durableAlexPashenko For diligence and help in my efforts.
Good luck to all!!!


Post has been editeddraiv88 - 28.02.17, 20:13

I have not rolled this way, and other methods, too, so I wrote the instruction for those who have no new TWRP. There were suspicions that something remained from the old firmware in the system and did not allow to establish otherwise.

flexible1126,
What is the new recovery different? Why are such torments?

gnom9912 , OTG, and this is the main thing.

Post has been editedaivas1974 - 24.07.16, 19:55

Kapets as difficult
Instruction as I did
I downloaded the new TWRP.
I went into the recovery
Selected Install the IMG image chose the image and voila

Mirinda27908 , quite right, just update you need both boot and recovery by this file. And everything will work.

Or as an option using PC -Xiaomi Mi5 - MIUI Firmware (OS 6.0) (post grafom # 49329251)

Post has been editedznpp - 24.07.16, 20:17

VladGordey , Thank you. Rebooted .. really cured. What a joke was ..Hz



Post has been editeddraiv88 - 24.07.16, 20:24

On Multicamum 6.7.21 FRONT TRANSFER. On xiaomi.eu all okay.

Bajo , I confirm ... The problem is the same.

Bajo ,
Quote:

But in general, posted B62, downloading.

Post has been editeds_b81 - 24.07.16, 22:06

abkaev,
Feel free to enjoy searching on the topic.
These issues have already been discussed.
Xiaomi Mi5 - MIUI firmware (OS 6.0) (post Droxman # 50494794)

After installing the TRWP, at the first boot, it hung up .... Next I try to enter the recovery asks to connect the cable .... explain what is wrong? The bootloader is unlocked.

Post has been editedserggraf - 24.07.16, 22:12

Updated its assembly to 6.7.21 (read the description)Xiaomi Mi5 - MIUI Firmware (OS 6.0) (post Malchik-Solnce # 48936359): thank_you:

Hello.
I reflated the phone from Stable 7.5.2 on Developer 6.5.30, but faced a problem in the form of a locked phone. Since the phone was tied to the MI account, after the first turned on it was necessary to verify, but I did not connect to the WiFi network and did not receive access to the Internet. As a result, the phone is locked, I can't log in, because there is no access to WiFi.
Now on the main screen inscription:
"This Device Is Locked
This Device Is Associated With An Existing Mi
Account. For Security Reason, You Need To
ENTER PASSWORD TO VERIFY THE DEVICE. "
Tell me, please, how to connect to the Internet and unlock the device.