Can someone help:
I ordered the body from Goldveev - it came with the left Chinese firmware. The transition to the global was impossible. Balance with update.
Climbed on the forums:
savagemessiahzine.comAltrom.ru.en.miui.comAs a result of turning the big mountain information, downloading firmware and two evenings the following sequence of actions turned out:
Required files:
Respectively, install all the drivers from Xiaomi from the header and
qualcommMiflashbeta.unlock_edlChinese firmwareGlobal firmware1. Install Miflashbeta.
2. Unzip:
2.1. Firmware in catalogs (I made root MI5-China and Mi5-global)
2.2. Unlock_edl.zip also in a separate folder.
3. From Images in Chinese global
we copy file mdtp.img (after three attempts it turned out his absence in the global firmware and, accordingly, failure during the firmware)
4. Now we do everything according to the instructions from the altrome since paragraph 3 and ending in paragraph 6:
4.1. Phone in the development of USB debugging and in FastBoot
4.2. Next, the command line in the directory with unlock_edl files.
4.3. On the command line We write FastBoot Flash ABOOT EMMC_APSBoot.MBN
It should turn out:
D: \ Phones \ FastBoot>fastboot flash aboot emmc_appsboot.mbn
Sending 'ABoot' (1277 KB) ...
OKAY [0.047s]
writing 'aboot' ...
OKAY [0.031s]
finished. total time: 0.078s
4.4. Next Team: FastBoot Reboot-Bootloader
Phone reboot again to fastboot. Do not hurry, give the system to recognize it.
4.5. Now Team: FastBoot OEM EDL
The phone will go out, and the computer will define it as a Qualcomm device on the COM port.
5. Everything can now sew the firmware.
5.1. Run Miflashbeta.
5.2. Choose a catalog with a Chinese firmware.
5.3. Click the Refresh button - must determine the COM port.
5.4. We flash through the Flash button.
5.5. We are waiting for the firmware and light up the green inscription - successfully.
6. Turn off the body.
6.2 Now in order to do not press the power button for a long time (one button has turned on for a very long time) - load the phone in fastboot and then calmly overload in normal mode.
6.3. We get downgrade to Chinese firmware 7.2.11
7. We repeat from paragraph 4.1. But now in paragraph 5.2, we flash the global firmware.
After switching on, we get the global firmware 7.5.2.0 Maamide
It may be possible to skip part with the firmware of the Chinese firmware, but I did not risk. : blush:
: thank_you:
Post has been editeddraiv88 - 11.07.16, 23:06