[X]Assistant

[Elephone-]

Elephone P9000 firmware
Elephone P9000
Description | Discussion пїЅ | Firmware пїЅ

ATTENTION!

- Problems of launching and operating third-party applications, including Google Pay, Sberbank, etc., are solved (more precisely, they have been solved long ago) in the profile topics of the programs in the sectionAndroid - Programs. In the theme of the firmware is OFFTOP!
- For information on the timing of updates, go to the official website of the brand!
- Never sew anythingin SPFlashTool in FORMAT ALL + DOWNLOAD mode (only if the opposite is not written in huge red letters and then check 100,500 times).
- OTA (OverTheAir) firmware, coming to users "over the air" are placed correctly, only on STOCK recovery, system and build.prop !!! Installed root - makes changes to the system and there may be problems! If you installed root, xposed or other components on the stock firmware -do not upgrade via OTA!!! Get a hang when loading or cyclorebuts. If, however, they were updated and received a cyclic reboot or hangup of the phone on the logo - the only solution is to flash the phone through SP Flash tools. If you still want to install OTA, then ONLY SYSTEM flash your current firmware through the USB flash drive and try to install OTA.
- Before flashing, make sure that the battery charge is more than 30%.

пїЅпїЅпїЅ download

Appeal to the owners of P9000.
If it so happens that you have strange glitches and you cannot solve them, read the topic and if you haven’t found any descriptions / solutions here, then first do it yourself:
1. Make a backup
2. Reset to the factory settings and flash the smart to the last stock through the USB flash drive completely (except for Preloader)
3. Turn on the smart and do not put anything extra, just the necessary minimum (account, contacts ..),do not restore programs from backups.
4. Chase for a while, make sure there are glitches / no.
5. If not, then there was a software problem andput your programs again, we recommend to restore only simple programs and toys. Settings and system applications do not restore.
6. If the glitches did not pass, then only we write here and wait for help. Always write the firmware version, describe in detail what was, what was done and how it became. We are not telepaths and the right question is half the correct answer!
пїЅпїЅпїЅ
All your actions are a risk for which you are responsible.
There are many different instructions on the Internet and on 4PDA, almost all issues have been resolved.
Make sure to use the search in the topic and the Internet before asking questions here..

Drivers and Utilities

SP_Flash_Tool- MTK-based flash driver for smartphones, instructions, drivers and more useful
SP_Flash_Tool_exe_Windows_v5.1552.00.000.zip
Signed SP Flashtool drivers
Flashtool driver / Installing Unsigned Drivers

Official firmware

Firmware on the official website

ᵥA 7.0 ᵥ

• Stock ROM Android 7.0_20170904 пїЅ mirror
  
• The first stable version of Android 7.0 20170418 пїЅ Mirror
  
• Android 7.0 BETA 20161230
  
• Test version of Android 7.0 20161101
  

ᵥA 6.0 ᵥ

• Stock ROM Android 6.0_20170112 for Flash Tool
  
• Stock ROM Android 6.0_20161107 for Flash Tool
  
• Stock ROM Android 6.0_20160810 for Flash Tool
  
• Stock ROM Android 6.0_20160715 for Flash Tool
  
• Stock ROM Android 6.0_20160628 for Flash Tool
  
• Stock ROM Android 6.0_20160621 (Beta) for Flash Tool
  
• Stock ROM Android 6.0_20160608 OTA update supported
  
• OTA update 20160531
  
• Stock ROM Android 6.0_20160419 OTA update supported
  
• Stock ROM 20160419 for Flash Tool
  
• Stock ROM Android 6.0_20160401 (Beta) for Flash Tool
  
• Stock ROM Android 6.0_20160315 OTA update supported
  
• Stock ROM Android 6.0_20160304
  
• Stock ROM Android 6.0_20160304_c239v55_dx for Flash Tool
  
• Stock ROM Android 6.0_20160224 / under Flash tool
  
  
• Imui v1.0 from 05/03/2016:for flash tool пїЅ for TWRP
  

Unofficial firmware

ᵥA 7.x ᵥ

• (7.1.2) AOKP
  
• (7.1.2) LineageOS 14.1
  
• (7.0) Eragon nougat
  

ᵥA 6.0 ᵥ

• CyanogenMod / LineageOS 13 and created on its base

  пїЅ LineageOS 13.0
  пїЅ Resurrection Remix
  пїЅ CyanogenMod 13 - Actual version пїЅ Archived versions
  
• Aerom

  � Aerom V5• for those who have a problem with communication -decision
  Previous versions of Aerom: V4 пїЅ V3 пїЅ V2 пїЅ V1
  
• Eragon

  Eragon theme on xda-developers
  пїЅ Eragon v5.0 (how to upgrade (en))
  Previous versions of Eragon: v4.7 пїЅ v4.5 пїЅ v3.8 пїЅ v3.5 пїЅ v3.0 пїЅ v2.8 пїЅ v2.0 пїЅ v1.9 пїЅ v1.8
  
  
  
• AOKP
  
• Darksense
  

Instructions

• Ways of firmware

  1. The program FlashTool - allows you to install the factory firmware and the smart will become like from the store. If inside the archive there are files system.img, boot.img, etc. - it means flashing under flashlight.
  2. Installing firmware or minor updates through custom recovery. From the store, the usual factory recovery is installed. Recovery is a program inside a smartphone that can be run without an installed OS and perform some actions to restore or clean the smartphone. Enhanced recovery allows you to not only install updates, but also make a full backup, restore backups, clear the memory of a smartphone, install patches, etc. There are various recovery options, such as CWM, TWRP, Carliv, MIUI, etc. You can learn how to use them in the corresponding topics at w3bsit3-dns.com. If the archive .zip firmware has a folder META-INF - then the firmware under the recovery, do not unpack it! So you throw the file into the phone and install it through the recovery (otherwise some individuals unpack ..).
  3. With the help of the program EleFlash - in the presence of root and custom recovery, installing a new firmware is possible immediately from a program that downloads the firmware to a smartphone from an Internet and reboots into the recovery for installation. Conveniently.
  
• FlashTool firmware recommendations

  ATTENTION - to avoid unnecessary problems ALWAYS run FlashTool with administrator rights (right button - Run as Administrator), disable User Account Control in Windows!
  • In the flashlight settings, the Options-Option checkbox should be checked - put both into DA DL with CheckSum.
  • Disable antivirus if problems and errors occur.
  • Change the USB cable and / or port if problems or errors occur.
  • Ideally, there should be no Russian letters, spaces, special characters and hieroglyphs on the way to the firmware and Flashlight.
  • If the firmware through the USB flash drive does not start, make sure that the driver for the firmware is installed:
  1. Open the device manager.
  2. Connect the DISABLE smart to the PC.
  3. A USB device should appear for a couple of seconds - MTK Preloader VCOM, then disappear. If the device has its own COM port, for example, COM7 or COM5 and there are no yellow icons, then everything is fine, if not, continue, or reinstall the driver.
  4. Until the device disappears, you must have time to right-click on it and install the driver manually. Explain how to install the driver will not, look on the Internet for your version of Windows, I will clarify that the drivers usually do not have a digital signature.
  5. When install the driver by force, you can try to flash it, it usually looks like this: open Flashlight, select the scatter file in the folder with the firmware, check that all the checkmarks are EXCEPT PRELOADER, set the Download Only mode, and press the Download button.
  6. Connect the DISABLE smart to the PC, it should appear in the device manager MTK Preloader VCOM and start the firmware.
  P.S. For the highly gifted - the OFF Smart is not just blocking and turning off the screen, but FULL OFF! happens....
  
  If the smartphone continuously reboots on the logo:
  - It is necessary to flash through the flashlight. Everything is the same - install drivers on MTK COM / MTK Preloader Vcom - the device appears at the time of the reboot (the screen turns off) and flashes as usual.
  How to turn off?
  1. If CWM custom recovery is installed - boot into it by pressing the Gr + button at the time of the reboot, Advanced - Power Off
  2. If the stock recovery is loaded into it by pressing the Gr + button at the time of the reboot, and Power Down - turn off the smart.
  
• Translated device firmware manual
  
• Instructions for firmware in the SP Flash Tool (with pictures)
  
• Flash Firmware
  
• Installing firmware for SP_Flash_Tool via TWRP
  
• If the smartphone is frozen, long press the power button (>10s.) Turn it off or reboot.
  
• If the smartphone does not turn on - the smart may be in a discharged state, put on charging, the smart may not even respond to it at first, but after a while (5 minutes or even a couple of hours) it may wake up ..
  
• When reviving a brick, press simultaneously + and - volume. Stitch as usual with SPFT.
  

Recovery & Root

пїЅ OfficialTWRP 3.2.1-0 + 3.1.1-0
пїЅ TWRP 3.1.0-1 пїЅ a source
пїЅ TWRP 3.0.2-8
пїЅ TWRP 3.0.2-1
пїЅ TWRP 3.0.2
пїЅ Installing TWRP 3.0 and Getting Root Rights

пїЅ Root to install via TWRP:
В® SuperSU
В® Magisk

Custom kernels

• DarkSense Kernel
  
  
• Elephone P9000 kernel source
  

miscellanea

Grorkmod
Solving the dialer (dialer) problem in Eragon 7.0
Solving the problem with the dialer (dialer) in 7.0
Fix for passing a SafetyNet check.
Setting a melody on each SIM card, enabling multi-profile and multi-window
Phone firmware when replacing the display (instructions, drivers, flash tool and firmware)
Clock widget / weather from CM13 for drain and stock-based custom
How to make Xposed work on Eragon 1.9+
Elephone P9000 Sound TP And Modem Fix By Deepflex
Elephone official website
Official Elephone Forum
P9000 section on xda-developers
• In order to take a snapshot of the screen (screenshot), you must simultaneously press and hold "VOL -" and "Power"
• * # * # 3646633 # * # * - enter the engineering menu from the dialer, on the market there are many programs that launch the engineering menu of the ITC

There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators). Prior to the appointment of a curator for filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedCusco - 06.05.18, 18:32

Reason for editing: TWRP 3.2.1-0

[omez79]

Is this article spam or true?
https: //www.getdroidti…9000-android-8-0-oreo/

[Svyatoslav_Uz]

omez79,
Do not believe this, there would be 8 android on this phone - it would be in the subject

[omez79]

Svyatoslav_UzIs it possible to make for our phone?

Attached images

Post has been editedomez79 - 11.03.19, 21:18

[Svyatoslav_Uz]

omez79,

omez79 @ 03/11/19, 23:17

is it possible

possible, but who will do this?

[devil22]

omez79,
There is a p6000 but half of it does not work. Helio p10 unfortunately there is no support for Android 8, so please do not wait. If someone gathers, then there will not be much work normally ...

[omez79]

devil22, Thanks for clarifying.

[omez79]

devil22, http://zlauncher.ru/el...oshivku-android-8-0-o/

[greekorn]

Hi people! After flashing through FT, it stopped loading (continuous reboot to logo).
I tried to format, still flashing, but oddly. And why writes that "NAND Flash was not detected!"? o.O

============ Memory Detection Report ===========

Internal RAM:


External RAM:

Type = DRAM

Size = 0x80000000 (2048MB / 16384Mb)

NAND Flash:

ERROR: NAND Flash was not detected!

EMMC:

EMMC_PART_BOOT1 Size = 0x0000000000400000 (4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000 (4MB)
EMMC_PART_RPMB Size = 0x0000000000400000 (4MB)
EMMC_PART_GP1 Size = 0x0000000000000000 (0MB)
EMMC_PART_GP2 Size = 0x0000000000000000 (0MB)
EMMC_PART_GP3 Size = 0x0000000000000000 (0MB)
EMMC_PART_GP4 Size = 0x0000000000000000 (0MB)
EMMC_PART_USER Size = 0x0000000747c00000 (29820MB)

UFS:

ERROR: UFS was not detected!

============ RAM Test ============

Data Bus Test:

[D0]
[D0]

[devil22]

greekorn,

[email protected], 21:05

And why writes that "NAND Flash was not detected!"?

To this may be several prechin.
1 FT drivers not correctly installed (re-install drivers or try on another computer)
2 does not fit the FT version (try the latest)
3 errors in the initial memory sectors (firmware with full memory format, can help.)
4 covered the memory of the phone.

[deman555]

I stopped working on the official firmware + magik payment via GooglePay. Who how to overcome this joint?

[booroondook]

[email protected], 13:45

stopped working on the official firmware + magik payment via GooglePay

Google-Pei after upgrading received enhanced protection against hacking - so it stopped working.
However, the developers of Magisk are not asleep either - download and install an updated version of Magisk, and you will be happy.

[majevgenij]

People!!!
Who managed to get Google Pay, on this device, after the latest events with google pay. If there is good news, write down in detail what and how you did !!!!

[majevgenij]

booroondook, set, or nothing happened. In Majisk, Manadzhepp writes that Majisk itself is not installed

Posted on 03/17/2019 at 15:49 PM:

Post has been editedderak1129 - 21.04.19, 04:17

Reason for editing: P. 3.8 under spoiler

[booroondook]

majevgenijapparently, you just thought that you put Magisk.
Try to put it again. And carefully read the text messages on the screen during and after installation.

[majevgenij]

booroondook, mazhisk I put through the recovery. Writes everything ok when installing

Posted on 03/17/2019, 17:03:

booroondook, from under the system, I patched the boot.img kernel, and poured it through the recovery. All one is not installed

[booroondook]

majevgenijmiracles do not happen.

[majevgenij]

booroondook, unfortunately I can not send you a video, the site prohibits and wanted to show you

[booroondook]

majevgenijwhy video?
Here you are, being in TWRP recovery supposedly just installed Magisk. You have messages on the screen at this time. So take a picture of the screen with these messages (borrow the phone from someone for this, or just rewrite the messages).

[majevgenij]

booroondook,

Attached images

Post has been editedderak1129 - 21.04.19, 04:18

Reason for editing: P. 3.8 under spoiler

[Shoot-nik]

booroondook, in twrp, the screenshot is done in the same way as in the system ...