Assistant
REPLY |
Nomi C07008 Sigma 7 3G 4GB - Firmware |
Message#1 01.03.16, 00:07 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 541 Check in: 08.03.13 Xiaomi Redmi 4X 2/16 Reputation: 147 | Nomi C07008 Sigma 7 3G - Firmware Nomi sigma Description | FAQ | Purchase � | Firmware � Important information! Everything that you do - at your own peril and risk! The authors of the manuals are not responsible for the curves of the hands of the owners! Before you do anything with the device or write to this topic, read the instructions! Before all gestures, make a backup using the recovery and save to PC !!! This is a guarantee that you will not get a brick !!! - Before posting photos read the topic Working with Images on the forum - If this is your first time in this topic - read the FAQ and the contents of the header - it saves both your time and the time of all participants in the discussion. Drivers and Utilities Driver preloader Flashtool Flashtool and drivers in the archive are such files: 1-CheckSum generation of the checksum.ini file 2-Driver driver installation for item 3 3-SN-Writer-tool program to write have if flies (instructions will be later) 4-SP_Driver_V1524 driver installation for firmware via USB flash drive 5-SP_Flash_Tool_exe_Windows_v5.1604.00.000 firmware program Pack-Flashtool-v5.1604.00.000.rar(93.62 MB) CWM to put through the mob uncle Installing an unsigned driver in Windows 8/10 Driver for windows 8-10 Root / Recovery Official firmware Firmware for the version with 8 GB (I really and 4 GB was fine) firmware using microSD card (the camera does not work) firmware from the official site firmware for the device with 4 GB Unofficial firmware Instructions Instructions for flashing the tablet Download and unpack the program SP_Flash_Tool on your computer Download and install drivers Unpack the archive with the firmware for your tablet (the directory to the unpacked folder with the firmware files should not contain Cyrillic characters) Turn off. Cable not connected to computer (Skip if the drivers are already installed) We connect the tablet to the computer with a cable. The operating system will find a new device - specify the system folder with the USB driver VCOM (for its version of the OS). If something does not work with the installation of drivers, then read the instructions for installing drivers. (skip if the drivers are already installed) Disconnect the cable from the computer. Run the programSP Flash Tool. Push the buttonScatter-loadingand select the fileMT6572_Android_scatter.txt (it lies in the folder with the firmware, the devices are different, so the file will be named after the processor, for example MT6789, etc.) Push buttonDownload. We connect the switched off tablet to the computer with a cable. The program should see it (the Red carpet) and start the firmware. If the tablet is not found, disconnect it from the computer, remove and insert the battery and reconnect to the computer. In the Device Manager, with correctly installed drivers, at the time of the firmware, they should monitor the mtk usb port (MediaTek PreLoader USB VCOM Port). And upon completion of the firmware or when any error occurs, the device turns off and disappears from the device manager. After the end of the firmware, disconnect the tablet from the computer and turn on the device. miscellanea utility for c07009 There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links. Post has been editedAngel_hd - 25.09.18, 02:17 |
Message#2 25.03.16, 12:07 | |
D'oh! [offline] Group: Honorary Gameday Messages 3395 Check in: 10.11.11 Huawei P10 Lite WAS-LX1 Reputation: 962 | M We move to subsection� Other brands �. -------------------- - �� ���� ������ �������� �� ����. �� ��� ����� ������ ��� ������������ �������. download© Homer Jay Simpson |
Message#3 09.06.16, 17:52 | |
Visitor [offline] Group: Active users Messages 16 Check in: 07.10.15 HTC 8X Reputation: 0 | Good day. They brought this device with the message "Could not complete the encryption" or something like that. After resetting the settings, flashing and dancing with tambourines, the tablet endlessly shows the Android download animation and that's it. What else can you do? |
Message#4 10.06.16, 17:12 | |
a guest [offline] Group: Users Messages 6 Check in: 10.12.15 Reputation: 0 | Yesterday I flashed a tablet of this - C07008_2500mAH_3G 02.18.16 V 2.0.zip - and received a brick in return. The system began to appear as an unknown device ( |
Message#5 11.06.16, 21:21 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 541 Check in: 08.03.13 Xiaomi Redmi 4X 2/16 Reputation: 147 | wake up deyce and put here I ask through FT My situation was similar, I asked, it helped! Posted 06/11/2016 21:22: pajalni4eg,I advise you to do the same Post has been editedAngel_hd - 11.06.16, 21:23 -------------------- Thank God! |
Message#6 13.06.16, 19:32 | |
Visitor [offline] Group: Active users Messages 16 Check in: 07.10.15 HTC 8X Reputation: 0 | Not a ride ... Hanging at the start ... |
Message#7 16.06.16, 11:40 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 541 Check in: 08.03.13 Xiaomi Redmi 4X 2/16 Reputation: 147 | |
Message#8 17.06.16, 18:56 | |
a guest [offline] Group: Users Messages 6 Check in: 10.12.15 Reputation: 0 | I did it the same day ... the snag was that the computer did not see the tablet point-blank ... While I didn’t stumble it with a reset needle ... It works like a clock ... Even a ray than after a store: kindness : |
Message#9 17.06.16, 20:03 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 541 Check in: 08.03.13 Xiaomi Redmi 4X 2/16 Reputation: 147 | sindromd, by the way, on the firmware for the device with 8 GB, the tablet really works faster, but the minus is that it does not see the main camera, but only the front-end works ... Post has been editedAngel_hd - 17.06.16, 20:04 -------------------- Thank God! |
Message#10 16.07.16, 15:15 | |
a guest [offline] Group: Users Messages 6 Check in: 27.09.12 Nomi i502 Drive Reputation: 0 | Good day. Please tell me, is the Nomi C07008, 4 GB device, but how does the Nomi company like to issue only 1 GB for applications (of which Google’s applications take almost everything), is there a firmware for this device to fix it and fully make all 4 applications GB? Thank you in advance :-) |
Message#11 21.07.16, 15:08 | |
a guest [offline] Group: Users Messages 2 Check in: 30.08.15 Reputation: 0 | I stitched a brick through FT as a result, it does not turn on at all |
Message#12 22.07.16, 00:24 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 541 Check in: 08.03.13 Xiaomi Redmi 4X 2/16 Reputation: 147 | shmalidze https: //docs.google.co...WdCbGs&export=download Shiit here in the download mode (for the device with 4 GB) -------------------- Thank God! |
Message#13 15.08.16, 09:31 | |
a guest [offline] Group: Users Messages 6 Check in: 15.08.16 Nokia N9 Reputation: 0 | Do you guys have a good time of day, on nomi c07009 and nomi c07008 the same firmware or not? If no, then where can I find it on nomi c07009? Thank you in advance. |
Message#14 15.08.16, 13:45 | |
a guest [offline] Group: Users Messages 6 Check in: 15.08.16 Nokia N9 Reputation: 0 | Accidentally stumbled upon this site www.panduoduo.net and there these firmware though # sing eat)) I entered my motherboard in a search engine, and a dozen of them knocked me out, now I take turns downloading, I'll try to install) |
Message#15 15.08.16, 18:30 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 541 Check in: 08.03.13 Xiaomi Redmi 4X 2/16 Reputation: 147 | |
Message#16 17.08.16, 13:59 | |
Novice [offline] Group: Active users Messages 43 Check in: 11.01.14 Reputation: 2 | I understand these Nomi can be different fees. I have KT07C_F4_V02 2015_05_25. What firmware to pour? Maybe someone picked up? Reluctance to dance with a tambourine. |
Message#17 18.08.16, 18:49 | |
_ && make it funny) [offline] Group: Curators Messages 2346 Check in: 05.11.13 Xiaomi Redmi 6 Pro 4/64 Reputation: 508 | also interesting ... Maybe the topstarter will tell you - where did you get the firmware in the header? (simple search in Google - gives nothing) maybe there is some whale. forums nomi? Thanks in advance: thank_you: regarding "(the) nomi c07009" - a few notes: product: KT07C_JTY_V_WCDMA fastboot info C: \ Users \ Admin>adb reboot bootloader C: \ Users \ Admin>fastboot devices 0123456789ABCDEF fastboot C: \ Users \ Admin>fastboot getvar all (bootloader) partition-size: fat: 13f9e0000 (bootloader) partition-type: fat: fat (bootloader) partition-size: userdata: 32000000 (bootloader) partition-type: userdata: ext4 (bootloader) partition-size: cache: e200000 (bootloader) partition-type: cache: ext4 (bootloader) partition-size: system: 3e800000 (bootloader) partition-type: system: ext4 (bootloader) partition-size: expdb: a00000 (bootloader) partition-type: expdb: raw data (bootloader) partition-size: logo: 300000 (bootloader) partition-type: logo: raw data (bootloader) partition-size: misc: 80000 (bootloader) partition-type: misc: raw data (bootloader) partition-size: sec_ro: 40000 (bootloader) partition-type: sec_ro: raw data (bootloader) partition-size: recovery: 600000 (bootloader) partition-type: recovery: raw data (bootloader) partition-size: boot: 600000 (bootloader) partition-type: boot: raw data (bootloader) partition-size: uboot: 60000 (bootloader) partition-type: uboot: raw data (bootloader) partition-size: seccfg: 20000 (bootloader) partition-type: seccfg: raw data (bootloader) partition-size: protect_s: a00000 (bootloader) partition-type: protect_s: ext4 (bootloader) partition-size: protect_f: a00000 (bootloader) partition-type: protect_f: ext4 (bootloader) partition-size: nvram: 500000 (bootloader) partition-type: nvram: raw data (bootloader) partition-size: pro_info: 300000 (bootloader) partition-type: pro_info: raw data (bootloader) partition-size: ebr1: 80000 (bootloader) partition-type: ebr1: raw data (bootloader) partition-size: mbr: 80000 (bootloader) partition-type: mbr: raw data (bootloader) partition-size: preloader: 1,400,000 (bootloader) partition-type: preloader: raw data (bootloader) kernel: lk (bootloader) product: KT07C_JTY_V_WCDMA (bootloader) version: 0.5 all: Done !! finished. total time: 0.125s C: \ Users \ Admin>fastboot oem device-info ... ^ C C: \ Users \ Admin> C: \ Users \ Admin>fastboot reboot rebooting ... finished. total time: -0.000s C: \ Users \ Admin> acc. "from the box": build.prop # begin build properties # autogenerated by buildinfo.sh ro.build.id = KOT49H ro.build.display.id = KT07C.3G-20160107 ro.custom.build.version = KT07C_WG72_X_OTG ro.build.version.sdk = 19 ro.build.version.codename = REL ro.build.version.release = 4.4.2 ro.build.date = 2016 年 01 08 日 星期五 17:32:14 CST ro.build.date.utc = 1452245534 ro.build.type = user ro.build.user = xwd ro.build.host = xwd-desktop ro.build.tags = test-keys ro.product.model = Nomi C07009 ro.product.brand = Nomi C07009 ro.product.name = Nomi C07009 ro.product.device = Nomi C07009 ro.product.board = Nomi C07009 ro.product.cpu.abi = armeabi-v7a ro.product.cpu.abi2 = armeabi ro.product.manufacturer = JTY ro.product.locale.language = en ro.product.locale.region = GB ro.wifi.channels = ro.board.platform = # ro.build.product is obsolete; use ro.product.device ro.build.product = kt07c_jty_v_wcdma # Do not try to parse ro.build.description or .fingerprint ro.build.description = kt07c_jty_v_wcdma-user 4.4.2 KOT49H eng.xwd.1452245320 test-keys ro.build.fingerprint = alps / kt07c_jty_v_wcdma / kt07c_jty_v_wcdma: 4.4.2 / KOT49H / 1452245320: user / test-keys ro.build.flavor = ro.build.characteristics = tablet # end build properties # begin mediatek build properties ro.mediatek.version.release = KT07C.3G-20160107 ro.mediatek.platform = MT6572 ro.mediatek.chip_ver = S01 ro.mediatek.version.branch = KK1.MP7 ro.mediatek.version.sdk = 2 # end mediatek build properties # # from out / target / product / kt07c_jty_v_wcdma / obj / CUSTGEN / config / system.prop # # # system.prop for generic sdk # rild.libpath = / system / lib / mtk-ril.so rild.libargs = -d / dev / ttyC0 # MTK, Infinity, 20090720 { wifi.interface = wlan0 # MTK, Infinity, 20090720} # MTK, mtk03034, 20101210 { ro.mediatek.wlan.wsc = 1 # MTK, mtk03034 20101210} # MTK, mtk03034, 20110318 { ro.mediatek.wlan.p2p = 1 # MTK, mtk03034 20110318} # MTK, mtk03034, 20101213 { mediatek.wlan.ctia = 0 # MTK, mtk03034 20101213} # wifi.tethering.interface = ap0 # ro.opengles.version = 131072 wifi.direct.interface = p2p0 dalvik.vm.heapgrowthlimit = 96m dalvik.vm.heapsize = 128m # USB MTP WHQL ro.sys.usb.mtp.whql.enable = 0 # Power off opt in IPO sys.ipo.pwrdncap = 2 ro.sys.usb.storage.type = mtp, mass_storage # USB BICR function ro.sys.usb.bicr = yes # USB Charge only function ro.sys.usb.charging.only = yes # audio ro.camera.sound.forced = 0 ro.audio.silent = 0 ro.zygote.preload.enable = 0 persist.sys.bootoption = 0 # persist.sys.timezone = Asia / Bangkok persist.sys.timezone = Europe / Athens # persist.sys.timezone = Asia / Dubai ro.elink.gemini = true # temporary enables NAV bar (soft keys) qemu.hw.mainkeys = 0 ro.sf.lcd_density = 160 ro.kernel.zio = 38,108,105,16 # # ADDITIONAL_BUILD_PROPERTIES # persist.gemini.sim_num = 2 ro.gemini.smart_sim_switch = false ro.gemini.smart_3g_switch = 0 ril.specific.sm_cause = 0 bgw.current3gband = 0 ril.external.md = 0 ro.btstack = blueangel ro.sf.hwrotation = 270 ril.current.share_modem = 2 curlockscreen = 1 ro.mediatek.gemini_support = true persist.radio.fd.counter = 15 persist.radio.fd.off.counter = 5 persist.radio.fd.r8.counter = 15 persist.radio.fd.off.r8.counter = 5 drm.service.enabled = true fmradio.driver.enable = 1 ril.first.md = 1 ril.flightmode.poweroffMD = 1 ril.telephony.mode = 1 dalvik.vm.mtk-stack-trace-file = / data / anr / mtk_traces.txt persist.mtk.anr.mechanism = 1 mediatek.wlan.chip = mediatek.wlan.module.postfix = _ ril.radiooff.poweroffMD = 0 ro.config.notification_sound = Proxima.ogg ro.config.alarm_alert = Alarm_Classic.ogg ro.config.ringtone = Backroad.ogg persist.mtk.wcn.combo.chipid = -1 ro.fota.oem = MTK_KK ro.fota.platform = MTK_KK ro.fota.type = phone ter.service.enable = 0 mediatek.extmd.usbport = 0 ro.lte.dc.support = 0 ril.active.md = 0 ro.setupwizard.mode = OPTIONAL ro.com.google.gmsversion = 4.4_r5 ro.com.google.clientidbase = alps-kt07c_jty_v_wcdma- {country} ro.com.google.clientidbase.ms = alps-kt07c_jty_v_wcdma- {country} ro.com.google.clientidbase.yt = alps-kt07c_jty_v_wcdma- {country} ro.com.google.clientidbase.am = alps-kt07c_jty_v_wcdma- {country} ro.com.google.clientidbase.gmm = alps-kt07c_jty_v_wcdma- {country} persist.sys.dalvik.vm.lib = libdvm.so net.bt.name = Android dalvik.vm.stack-trace-file = / data / anr / traces.txt # begin ROCK GOTA properties ro.rock.gota.brand = Nomi C07009 ro.rock.gota.model = Nomi C07009 ro.rock.gota.version = KT07C.3G-20160107_1452245539 # end ROCK GOTA properties partition table: shell @ Nomi C07009: / $ cat / proc / emmc cat / proc / emmc partno: start_sect nr_sects partition_name emmc_p1: 00000400 00000002 "ebr1" emmc_p2: 00004800 00005000 "protect_f" emmc_p3: 00009800 00005000 "protect_s" emmc_p4: 0001ba00 001f4000 "android" emmc_p5: 0020fa00 00071000 "cache" emmc_p6: 00280a00 00200000 "usrdata" emmc_p7: 00480a00 009fcf00 "fat" shell @ Nomi C07009: / $ cat / proc / dumchar_info cat / proc / dumchar_info Part_Name Size StartAddr Type MapTo preloader 0x0000000001400000 0x000000000000000000 2 / dev / misc-sd mbr 0x0000000000080000 0x000000000000000000 2 / dev / block / mmcblk0 ebr1 0x0000000000080000 0x0000000000080000 2 / dev / block / mmcblk0p1 pro_info 0x0000000000300000 0x0000000000100000 2 / dev / block / mmcblk0 nvram 0x0000000000500000 0x0000000000400000 2 / dev / block / mmcblk0 protect_f 0x0000000000a00000 0x0000000000900000 2 / dev / block / mmcblk0p2 protect_s 0x0000000000a00000 0x0000000001300000 2 / dev / block / mmcblk0p3 seccfg 0x0000000000020000 0x0000000001d00000 2 / dev / block / mmcblk0 uboot 0x0000000000060000 0x0000000001d20000 2 / dev / block / mmcblk0 bootimg 0x0000000000600000 0x0000000001d80000 2 / dev / block / mmcblk0 recovery 0x0000000000600000 0x0000000002380000 2 / dev / block / mmcblk0 sec_ro 0x0000000000040000 0x0000000002980000 2 / dev / block / mmcblk0 misc 0x0000000000080000 0x00000000029c0000 2 / dev / block / mmcblk0 logo 0x0000000000300000 0x0000000002a40000 2 / dev / block / mmcblk0 expdb 0x0000000000a00000 0x0000000002d40000 2 / dev / block / mmcblk0 android 0x000000003e800000 0x0000000003740000 2 / dev / block / mmcblk0p4 cache 0x000000000e200000 0x0000000041f40000 2 / dev / block / mmcblk0p5 usrdata 0x0000000040000000 0x0000000050140000 2 / dev / block / mmcblk0p6 fat 0x000000013f9e0000 0x0000000090140000 2 / dev / block / mmcblk0p7 bmtpool 0x0000000000000000 0x00000000febf00a8 2 / dev / block / mmcblk0 Part_Name: Partition name you should open; Size: size of partition StartAddr: Start Address of partition; Type: Type of partition (MTD = 1, EMMC = 2) MapTo: actual device you operate shell @ Nomi C07009: / $ busybox busybox / system / bin / sh: busybox: not found 127 | shell @ Nomi C07009: / $ cat / proc / partitions cat / proc / partitions major minor #blocks name 7 0 1254 loop0 7 1 3135 loop1 7 2 40557 loop2 7 3 7293 loop3 7 4 76971 loop4 7 5 5214 loop5 7 6 7293 loop6 7 7 5214 loop7 253 0 393216 zram0 179 0 7597184 mmcblk0 179 1 1 mmcblk0p1 179 2 10240 mmcblk0p2 179 3 10240 mmcblk0p3 179 4 1024000 mmcblk0p4 179 5 231424 mmcblk0p5 179 6 1048576 mmcblk0p6 179 7 5236608 mmcblk0p7 179 64 2048 mmcblk0boot1 179 32 2048 mmcblk0boot0 179 96 7846912 mmcblk1 179 97 7846798 mmcblk1p1 254 0 3134 dm-0 254 1 40556 dm-1 254 2 7292 dm-2 254 3 76970 dm-3 254 4 5213 dm-4 254 5 7292 dm-5 254 6 5213 dm-6 7 8 67615 loop8 254 7 67615 dm-7 7 9 5214 loop9 254 8 5213 dm-8 7 10 4174 loop10 254 9 4174 dm-9 7 11 6253 loop11 254 10 6253 dm-10 shell @ Nomi C07009: / $ shell @ Nomi C07009: / $ df df Filesystem Size Used Free Blksize / dev 231.3M 128.0K 231.2M 4096 / sys / fs / cgroup 231.3M 12.0K 231.3M 4096 / mnt / secure 231.3M 0.0K 231.3M 4096 / mnt / asec 231.3M 0.0K 231.3M 4096 / mnt / obb 231.3M 0.0K 231.3M 4096 / storage / usbotg 231.3M 0.0K 231.3M 4096 / system 984.3M 640.4M 343.8M 4096 / data 1006.9M 908.0M 98.9M 4096 / cache 221.5M 4.2M 217.3M 4096 / protect_f 8.8M 4.1M 4.8M 4096 / protect_s 8.8M 4.0M 4.8M 4096 / mnt / cd-rom 1.2M 1.2M 0.0K 2048 / mnt / media_rw / sdcard0: Permission denied / mnt / secure / asec: Permission denied / storage / sdcard0 5.0G 243.8M 4.8G 32768 --- firmware "calculated" on the internal. 8 Gig USB flash drive (+ FT Memory Detection Report - also says 8 Gig) by instr. "Instructions for creating a full ROM-backup device (relevant for all platforms)" FT:SP_Flash_Tool is the flash driver for MTK smartphones. ============ Memory Detection Report =========== Internal RAM: External RAM: Type = DRAM Size = 0x20000000 (512MB / 4096Mb) NAND Flash: ERROR: NAND Flash was not detected! EMMC: EMMC_PART_BOOT1 Size = 0x0000000000200000 (2MB) EMMC_PART_BOOT2 Size = 0x0000000000200000 (2MB) EMMC_PART_RPMB Size = 0x0000000000020000 (0MB) EMMC_PART_GP1 Size = 0x0000000000000000 (0MB) EMMC_PART_GP2 Size = 0x0000000000000000 (0MB) EMMC_PART_GP3 Size = 0x0000000000000000 (0MB) EMMC_PART_GP4 Size = 0x0000000000000000 (0MB) EMMC_PART_USER Size = 0x00000001d2000000 (7456MB) ============ RAM Test ============ for backup - the scatter from "C07008 01/05/15" from the header was of course used MT6572_Android_scatter.txt(7.04 KB) of course - "the first thing you need" is caste recovery acc. - it was "repacked" from the "C07008 CWM" header (replaced with a kernel - with "a kernel from native stock recovery") ROM_0_test_recovery.zip(4.39 MB) at the same time - the partition table (/etc/recovery.fstab) in "C07008 CWM" - fully corresponds to "C07009" :)) # mount point fstype device [device2] / misc emmc / dev / misc / data ext4 / dev / block / mmcblk0p6 / system ext4 / dev / block / mmcblk0p4 / cache ext4 / dev / block / mmcblk0p5 / boot emmc / dev / bootimg / recovery emmc / dev / recovery / emmc vfat / dev / block / mmcblk0p7 / sdcard vfat / dev / block / mmcblk1p1 / dev / block / mmcblk1 / sd-ext auto / dev / block / mmcblk1p2 - and acc. "repack" (CWM for "C07009"): new_C07008_150512__recovery_160109-165559.img(4.67 MB) though it was possible to flash "only recovery" only with the help of "FlashToolMod fly-droid.org.zip (14.02 MB) from here:PiPO T9 - Firmware (Post nik2670 # 38293659)(spoiler "(8038) SP FLASH TOOL ERROR) / (PMT changed for the ROM; it must be downloaded") for CWM firmware - a scatter is already used - which was obtained with MtkDroidTools_v253 MT6572_Android_scatterDroidTools.txt(7.13 KB) Well, when there is a CWM, then getting a root is no longer a question (to flash Stable:http://download.chainfire.eu/supersu-stable ) Post has been editedwladimir_tm - 18.08.16, 19:13 -------------------- |
Message#18 18.08.16, 20:07 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 541 Check in: 08.03.13 Xiaomi Redmi 4X 2/16 Reputation: 147 | -------------------- Thank God! |
Message#19 19.08.16, 16:18 | |
Novice [offline] Group: Active users Messages 43 Check in: 11.01.14 Reputation: 2 | KT07C_F4_V02 2015_05_25 firmwarehttps: //docs.google.co...2RHU3c&export=downloadwe sew from the folder KT07B 240_2500mAH_3G_20150420_C07008 0515 (in the archive 2 firmware) everything works. good luck to all |
Message#20 19.08.16, 21:54 | |
a guest [offline] Group: Users Messages 6 Check in: 15.08.16 Nokia N9 Reputation: 0 | Guys, I successfully flashed Nomi C07009 with the firmware from here www.panduoduo.net/r/18592354, everything flutters like a butterfly)) is pleased with everything)) before that, of course, I poured the firmware C07008 into it, getting an eternal reboot, after that with several other firmware versions but it's good that I came across this site)) I would be glad to throw this firmware here myself, but the Internet is so weak that the 410mb itself downloaded the whole day (( |
Message#21 19.08.16, 22:05 | |
a guest [offline] Group: Users Messages 6 Check in: 15.08.16 Nokia N9 Reputation: 0 | Angel_HD, wrote above, everything turned out, the site with the firmware from the Middle Kingdom helped very much)))) the main thing is to know what the motherboard is and to drive into the search engine, and there you already have to choose, on my motherboard there are both nomi and bravis, and Samsung lives, and firmware )))) |
mobile version | Now: 04.29.19, 07:56 |