Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
ZTE Blade X3 - Firmware |
Message#2 15.12.15, 09:33 | |
Experienced [offline] Group: Curators Messages 610 Check in: 13.12.10 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 19 | similarly - downloaded in chrome: file error. A donkey generally interrupts the jump. I had to download the preload master-set and download the file. it works now. those who do not want to fool - flooded on the Yandex disk. I hope someone will come in handyhttps://yadi.sk/d/_Wx7eMwpmEQMB |
Message#3 19.12.15, 16:13 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3303 Check in: 04.11.10 ZTE Blade X3 Reputation: 328 | citigunmay I ask you to check: 1. Is there a menuSettings ->Sounds and notifications ->Sound enhancementparagraphBesLoudness (Speaker Volume Amplifier)? 2. When the sound profile is on"Soundless"Is there a camera shutter sound when taking a picture? 3. In the video settings, if you enable "Stabilization", is it dark at the very video? Newest firmwareB03 (Post starii56 # 48885934): - Kernel version:Tue Feb 2 12:51:52 - Build number:BLADE_D2_ASIAV1.0.0B03 - Version ordered by user:ALPS.L1.MP3.V2.47_GINR6735M.65U.L1_P85 New firmwareB02nowlies on the official sitefirst appeared inPoste citigun # 45439730: - Kernel version:Mon Oct 12 20:36:46 - Build number:BLADE_D2_ASIAV1.0.0B02 - Version ordered by user:ALPS.L1.MP3.V2.47_GINR6735M.65U.L1_P42 Previous firmware differed only in the date of the kernel version: - Kernel version:Mon Sep 28 15:08:07 - Build number:BLADE_D2_ASIAV1.0.0B01 - Version ordered by user:ALPS.L1.MP3.V2.47_GINR6735M.65U.L1_P26 - Kernel version:Mon Sep 21 12:01:48 - Build number:BLADE_D2_ASIAV1.0.0B01 - Version ordered by user:ALPS.L1.MP3.V2.47_GINR6735M.65U.L1_P26 Post has been editedR.U.S.I.K. - 17.04.16, 15:03 Reason for editing: Added W03 -------------------- It's nice to be important, but it's nice. © H.P.Baxxter aka Scooter |
Message#4 29.12.15, 20:05 | |
TWRP [offline] Group: Curators Messages 3707 Check in: 21.02.15 Xiaomi Redmi 4X 3/32 Reputation: 4082 | TWRP 2.8.7.0 ��� ZTE Blade X3 downloadATTENTION!!! Setonly with unlocked bootloaderusing adb and fastboot mode (do not use SP FlashTool)! About unlocking the bootloader and installing the recovery, see below, under the "Installation" spoiler The default recovery has a light English materialized "Play" theme fromz31s1g, and the additional two themes "Dark" and "Light" can be downloaded from the author's site:Materialized theme How to install an alternative theme About version Recovery collected on the basis of Android 5.1 kernel firmware version BLADE_D2_ASIAV1.0.0B01 / Mon Sep 28 14:58:13 CST 2015 Download Installation ATTENTION!!! Setonly with unlocked bootloaderusing adb and fastboot mode (do not use SP FlashTool)! When unlocking the bootloader, all user data and programs will be automatically deleted! Warranty void! You will need a computer withADB driver and related ADB utilities 1. Unlocking the bootloader. In the "For Developers" menu, switch the boot loader to the "Unlock" position USB debugging must be enabled. Further: 1. Enter the "fastboot" mode with the commandadb reboot fastbootor turn off the phone and successively hold down the volume key up (+) and the ON button. to enter fastboot mode 2. From the "fastboot" mode commandfastboot oem unlockunlock the bootloader, confirm the action with the phone’s volume up key 3. Confirm the bootloader unlock with the commandfastboot oem unlock confirmConfirm the action with the phone’s volume up key. 4. Boot the system, make sure that after unlocking the bootloader, the system is working normally. 2. Firmware recovery. USB debugging must be enabled (after unlocking the bootloader, turn it on again). 1. Switch the phone to "fastboot" mode with the commandadb reboot fastbootor turn off the phone and successively hold down the volume key up (+) and the ON button. to enter fastboot mode 2. To install the recovery, you must place the recovery.img image file in the adb folder and execute the command: fastboot flash recovery recovery.img If the firmware is successful, OK will be written on the screen. After that, it is necessary, without starting the system, to enter the recovery. The first thing is to make a full backup! Note:if suddenly you did not adhere to the specified sequence and after unlocking the bootloader did not start the system, but immediately requested recovery, the following result is possible: and cyclic reboot when the system boots. To solve this situation, it is required from the fastboot mode with the commandfastboot flash recovery recovery.imgflash the stock recovery, start the machine, wait for the automatic recovery of the system, and then execute again "2. Firmware recovery."to install TWRP. Install ROOT If a root is not installed on your system, TWRP Recovery determines this automatically and suggests installing SuperSU when you exit it. You can choose the installation option and thus get root rights in the system. Features unlock with swipe At idle time, by default, a rather short time interval is set in recovery, after the expiration of which the recovery goes into power saving mode, the screen goes out and is blocked. To unlock, you need to make a svayp, but it works in a special way: you must slowly stretch from left to right, across the screen, without removing your finger from the screen. In order not to snoop on the screen at random, in the main menu, via the "palette" icon (for the "Play" theme), check the last box on the "Use alternative lock screen" to help overcome this problem ... Also, I draw your attention that in the settings there is an opportunity to increase or completely disable the idle time for falling asleep. Acknowledgments sanek1804Thanks for testing the recovery! Post has been editedjemmini - 23.10.16, 00:08 -------------------- Xiaomi Redmi 4X 3/32 |
Message#5 30.12.15, 23:03 | |
Wonderful Man [offline] Group: Friendssavagemessiahzine.com Messages 3205 Check in: 04.11.12 Xiaomi Redmi Note 3 Pro Standard Reputation: 414 | Perform these operations on 32-bit Windows (for 64 something I did not get it: blush :) Instead of the command:adb reboot fastboot log in to Fastboot manually(when the phone is turned off, successively hold and hold the volume key up (+) and the ON button.) After the appearance of 3 lines of the menu, click"Volume up (+)"select FASTBOOT and activate the entrance to it with the button"Volume down (-)" Next, perform the 2 remaining commands confirming each key "volume up (+)" on the phone ... If you did it like on the screen, then everything went well (see from the lineC: \ adb>fastboot oem unlock, above it a bit of garbage: blush :) Turn off the phone for a long time (more than 10 seconds) by pressing the ON button. Turn on the phone, do not get scared! will startgreen droid, there will be a self-restart andsystem launch will be long!(about 5 minutes) and the system will be reset to "Factory settings" After starting the system, you can not configure anything, just go through all the settings "on fast" so that the desktop starts Enter FASTBOOT mode again.MANUALand execute the command to the firmware Recovery Turn off the phone for a long time (more than 10 seconds) by pressing the ON button. ... further on the manual .... When you first enter the TRWP accept the proposal to make changes. ... further on the manual .... FULL BACKUP for deployment from under TRWP download and unzip the folderbackup-full-2015-12-30--13-03-36Copy to SD card on the way: TRWP \ BACKUPS \ ZTE_Blade_X3 Post has been editedVovii 78 RUS - 11.01.16, 23:53 -------------------- |
Message#6 31.12.15, 00:56 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 63 Check in: 03.04.13 DEXP Ixion X 5 Reputation: 7 | Vovii 78 RUS,these came upAndroid + ADB + driver + x64.rar(6.71 KB) But this does not solve my problems. Without login gmail in the developers menu does not go. M Do not forget to hide the pictures under the spoiler Message design Post has been editedolmusi - 31.12.15, 09:02 |
Message#7 15.01.16, 22:45 | |||
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3361 Check in: 06.01.06 Reputation: 537 | TWRP Recovery 2.8.7.0 from jemmini for firmware using SPFlashTool + get ROOT ATTENTION!!! If you didn’t manage to unlock your fastboot and / or bootloader yourself, we STRONGLY recommend not to unblock it !!! Those who unlocked - be sure to block it back. Instructions here:ZTE Blade X3 - Discussion (Post by sanek1804 # 46222438) For those who have the device still virgin - a simple and safe way to install custom recovery and get root rights: Contraindications! - It is strictly forbidden to FORMAT memory in SP FlashTool - this can kill your smartphone. - If you unlocked the bootloader / fastboot, then put everything back, otherwise you can get a brick! - Instruction:ZTE Blade X3 - Discussion (Post by sanek1804 # 46222438) Swinging 1. TWRP recovery fromjemmini : ZTE_X3_TWRP_SPFlash123123.rar (14.56 MB) 2. VCOM Windows7-8 driver:http: //savagemessiahzine.com/forum/d…98/Win7-8_VCOM_Drv.zip VCOM for Windows10:http: //savagemessiahzine.com/forum/d…ader+Drivers123123.rar 3. SPFlashTool:SPW504.rar(24.71 MB) 4. rootSuperSU:UPDATE-SuperSU-v2.46.zip(3.83 MB) *** do not unpacking to place before the start of the firmware on the smartphone's memory card! Instruction 1. Make sure that the charge of the smartphone is above 40% 2. open the SP Flash Tool and go to the DOWNLOAD tab 3. Click on the Scatter-Loading button and select the scatter file (MT6735M_Android_scatter.txt) from the previously downloaded archive. 4. Check that we have selected one single check mark in front of the Recovery field and there is a link to the file. Everything should look like this: 5. Turn off Anti-Virus (if it is available on the PC) and press the DOWNLOAD button 6. turn off the smartphone completely and in suchoff state connect it to USB. If the drivers are installed correctly, the SP Flash Tool will immediately flash the recovery and give a message that everything is OK If nothing happens, then try to correctly configure the driver byof this instruction 7. Turn off the smartphone from the PC, simultaneously hold the volume up (and hold it all the way) + the power button (until the logo appears). How to load TWRP - you can release the buttons) 8. When you first log into TWRP, immediately make a SWIPE to confirm your acceptance of the system change. TVRP renames the system file, which removes custom recovery. If this is not done, then after the first system reboot, factory recovery will be restored! ROOT: 1. Before installing the root, I highly recommend making a full backup of your system !!! In the BACKUP item, select the checkboxes on all items + select - use compression. 2. Installs ROOT via the Install item. Choose the folder / extrtnal_sd and select the file UPDATE-SuperSU-v2.46.zip Factory Recovery If you suddenly need factory recovery:ZTE_X3_StockRecovery.rar(8.22 MB) Post has been edited123123 - 20.01.16, 20:44 Reason for editing: In the header -------------------- Power Four / AURORA | ||
Message#8 16.01.16, 00:31 | ||
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3361 Check in: 06.01.06 Reputation: 537 | SPFlashTool firmware .Swinging Disk.Mail.ru(966mb) Separate Preloader:https://yadi.sk/d/2lBBLN-lrqYHz *** You only need to flash it if the device is completely brick and does not show signs of life. If you turn on the device (turns on the screen) - it means that the preloader should be touchedNOT NECESSARY!because more likely to hurt than help. UNDER ANY CONDITIONS - do not format the memory of the smartphone! You will not do anything good! Instruction 1. Charge the device by more than 50%. Disconnect it from the PC and turn it off. 2. Run the SP Flash Tool utility (you can download it and the driver here:ZTE Blade X3 - Discussion (Post 123123 # 46214376) 3. In the Download tab, click on the Scatter-loading button and specify the file: MT6735M_Android_scatter.txt 4. Verify that Download Only mode is selected !!! It should look like this: ** it is better not to flash the cache and userdata blocks !!! Either / recommended when you first start - enter the stock recovery and make a full reset! (Factory reset / wipe data) 5. Click the Download button 6. We connect the smartphone to the PC (in the off state!) 7. If you did everything correctly, the firmware download bars will run down below. Do not turn off the smartphone before the end of the firmware process! If nothing happens, then try to correctly configure the driver with this instruction:Highscreen Power Four - Discussion (Post 123123 # 44687875) ATTENTION!!! 1. under no circumstances DO formatting the memory of your smartphone! - brick secured 2. unblocked fastboot? Put everything back, block it! there are instructions. 3. everything is stuck on the bootloader (logo) and nothing happens for half an hour already? Then go to the recovery (native or TVRP, it does not matter! ... but TWRP is better! :)) and make a factory reset (factory reset) / or clear the cache, date, dalwick (in TWRP) 4. DO NOT touch the preloader with firmware. If the smartphone turns on the screen - it means everything is in order with the preloader !!! It does not require updating, reinstalling, or any other actions. He has 2 modes of operation, he either works or does not work. There is no third. Thanks for helping build the firmware.Vovii 78 RUS Post has been edited123123 - 21.05.16, 21:57 -------------------- Power Four / AURORA | |
Message#9 16.01.16, 10:39 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1231 Check in: 31.12.10 ZTE Blade X3 Reputation: 360 | 1. Bootloader lock. In the "For Developers" menu, switch the boot loader to the "Unlock" position USB debugging must be enabled. Further: 1. Enter the "fastboot" mode with the adb reboot fastboot command or turn off the phone and successively hold down the volume key (+) and the ON button. to enter fastboot mode 2. From the "fastboot" mode, use the fastboot oem lock command to lock the bootloader, confirm the action with the "volume up" key of the phone. P.S After that a cyclic reboot of the phone is possible, you need to enter the recovery and follow the format of the data section Post has been editedsanek1804 - 18.01.16, 17:48 -------------------- |
Message#10 14.02.16, 10:28 | |
TWRP [offline] Group: Curators Messages 3707 Check in: 21.02.15 Xiaomi Redmi 4X 3/32 Reputation: 4082 | TWRP 3.0.2forZTE Blade X3: recovery.img(13.92 MB) Recovery collected on the basis of stock firmware Android 5.1 version BLADE_D2_ASIAV1.0.0B01 / Mon Sep 28 14:58:13 CST 2015 Post has been editedjemmini - 09.04.16, 21:20 Reason for editing: updated version of TWRP: 3.0.2 -------------------- Xiaomi Redmi 4X 3/32 |
Message#11 15.02.16, 23:41 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 250 Check in: 20.09.12 Leagoo t5c Reputation: 60 | SIMPLE WAY TO RECEIVE ROOT AND INSTALL TWRP Sorry, if I overlooked the branch inattentively, but the way to make the title from the header seemed too complicated :) I would suggest a simpler way ... 1. Download KinRootHERE 2. Turn on the developer mode 8 times by tapping the build number in the "Settings" section of the phone. 3. In the "For Developers" section, we enable USB Debugging and Bootloader Unlocking. 4. Install the downloaded KingRoot. Run and wait for the result. 5. Making sure that the root-rights are successfully obtained, download from the headerTWRP Recovery V. 3.0 6. Downloading Rashr from Google Play (Mobile Uncle "Mobileuncle MTK Tools" do not try !!! will not work!). 7. Install the Rashr, we sew the image of the recovery downloaded from the header. To the question whether it is not possible to reboot into the recovery after the image firmware, we answer "Yes". 8. Once in TWRP, we focus on where and what, and make Backup systems,MANDATORY by ticking NVRAM. At the end we copy it to a hidden place on the hard disk of a computer. Carefully store and without fear of getting up what your heart desires with software received from the store. If anything, we are recovering from the backup (which is desirable to update along with the important system changes). P. S. Naturally, we forget about the opportunity to receive firmware updates from the brand! And about the warranty too ... Post has been editedleo2m - 04.04.16, 19:33 |
Message#12 20.02.16, 17:21 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 931 Check in: 08.10.08 Xiaomi Redmi 3S Reputation: 111 | Modified boot.img from original firmware Our phone does not sleep because of the LEDs, you can only give a green notification, otherwise a permanent active mode! This post is a solution to the problem of sleep. What is it for First, a little about what it is for. After that, decide whether to flash or not. Our phone supports two colors of the indicator on the front panel. itgreenandred. Moreover, for notifications is available onlygreen. Some applications, in particular, Viber (it was precisely because of him that everything was started), by default, the violet diode is lit, but we don’t have that, because of this constant active mode after the arrival of the Viber message. In WhatsApp, this problem is solved in the settings by specifying the color of the indicator (green), but there is no such configuration in Viber. In the modified boot.img, non-working LEDs are cut out so that there is no appeal to them. How to sew and what to sew ROOT is NOT needed for firmware If there is no experience with the firmware - better ask once again how and what! For firmware through SPFlashTools useinstruction(we are interested in paragraphs 1-6). Attention!In step 4 of the instruction, we see that the correct boot.img is selected and the tick is only opposite the boot. Screen attached. There should not be Cyrillic on the way to boot.img! If you already have TWRP Recovery 3.0, you can sew from it: Installation ->Installing images, select the desired boot.img, select the Boot partition - make a swipe for the firmware. For TWRP 2.8.7 is similar, only everything is in English. Good luck! MT6735M_Android_scatter.txt(9.17 KB) - scatter for flashing through FT If something goes wrong - turn off the phone by pressing OFF for 10 seconds, the release button as soon as the screen goes out, otherwise the download will go again. Sew the original boot. Prepared two optionsboot.img Option 1. Cut out all the LEDs (green, red, blue). As a result, in general, you can forget about the indicator, even while charging the phone. Option 2. Only green is left - it can be used for various notifications (for example, the program LightFlow). BOOT.IMG for firmware B01 boot.zip(7.19 MB) - without diodes boot_green.zip(7.19 MB) - with green diode boot_original.zip(7.2 MB) - original bottle BOOT.IMG for firmware B02 boot_green.zip(7.19 MB) - with green diode boot_noled.zip(7.19 MB) - without diodes boot.zip(7.19 MB) - original bottle BOOT.IMG for firmware B03 boot_B03_green.img(7.21 MB) - with green diode boot_B03_noled.img(7.21 MB) - without diodes boot.img(7.22 MB) - original bottle BOOT.IMG for firmware B01 Android 6 MT6735M_Android_scatter.txt(9.16 KB) - scatter for flashing through FT boot_green_B01_a6.img(7.7 MB) - with green diode boot_noled_B01_a6.img(7.7 MB) - without diodes boot.img(16 MB) - original bottle BOOT.IMG for firmware B04 Android 5.1 boot_noled_B04.img(7.23 MB) - without diodes boot_green_B04.img(7.23 MB) - with green diode boot.img(16 MB) - original bottle Post has been editedvd79 - 16.03.17, 09:01 |
Message#13 23.02.16, 23:20 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 659 Check in: 07.06.07 Reputation: 69 | And so, to add to the header, I provide the following instructions for the restoration of IMEI, from the forum thread on lenovo smartphones. Instructions for restoring IMEI (this method is suitable for almost all MTK devices): IMEI Check: * # 06 # Instruction 1. The first thing you need to do is go to the engineering menu of MTK. To do this, we need to install the Mobileuncltools program, or enter a code to access the engineering menu. The code is in the topic header. Run the program, click Engineer mode - MTK engineer mode, and get into the engineering menu. 2. Rewrite IMEI (remove the back cover, and rewrite the values ​​of two of your IMEI, be sure to note which one is the first and which is the second, so as not to confuse.) 3. In the engineering menu we look for CDS Information - Radio Information - Phone 1. CDS Information can be on the second tab, i.e. need to make a swipe right to left. 4. Enter the command in the line AT + EGMR = 1.7, "imei". imei is IMEI number 1 Click Send AT command 5. In the engineering menu we look for CDS Information - Radio Information - Phone 2 6. Enter the command in the line AT + EGMR = 1.10, "imei". imei is IMEI, at number 2 Click the Send AT command 7. Restart the phone, and check IMEI: * # 06 # 8. If IMEI is in place, then everything is ready. Just in case, video instructions for changing IMEI from another phone, but the principle is the same. The only difference is that they enter the engineering menu not through the Mobileuncltools program, but directly through the login code to the engineering menu, which does not work on our device. And the second point - they have a slightly different engineering menu, to find the CDS Information we need to go to the second tab (right to left): http://www.youtube.com/watch?v=BW5lSVeMC4g P.S. Further, some information from me personally. 1. And so, when I enter the engineering menu, the CDS information item and then the radio information ->phone 1. In the first line where you need to enter the command "AT + EGMR = 1.7," have your ", you need to put a space after" AT + ", and then write further" EGMR ... "only then the command will be correctly written. The same is true for the phone 2 item. 2. Small, but a mistake that I made. I rebooted the device after the manipulations, after which both IMEIs were displayed as "Invalid", but if the device is completely turned off and then turned on, then everything is displayed correctly, (but it may be different for everyone). And yet, you need to do all the manipulations without the presence of sims in the phone. Thanks again to everyone who helped me solve the problem. Than and thanked all the "+", I hope no one has forgotten. Well, his information was thrown.) K In a hat Post has been editedTpakTopucT-2016 - 10.02.18, 17:21 Reason for editing: Designed |
Message#14 25.02.16, 13:51 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 219 Check in: 02.09.11 Blackview BV9600 Pro Reputation: 9 | For some reason, all the drivers that were offered in the topic did not suit me (windows 10 x64). In the end, I found others. They became the first time, the phone through the Flash Tool was sewn perfectly. 1.zip(8.76 KB) Post has been editedsnekt @ - 29.03.16, 12:38 |
Message#15 25.02.16, 19:15 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 250 Check in: 20.09.12 Leagoo t5c Reputation: 60 | applicationto create backup and restoreNVRAM section as well as other sections of the firmware®Partitions Backup & Restore.NEED RTH! P.S. NVRAM, in order to recover normally, should be saved and restored with SECRO. Post has been editedsnekt @ - 29.03.16, 13:08 |
Message#16 28.02.16, 18:30 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 250 Check in: 20.09.12 Leagoo t5c Reputation: 60 | Curious firmware, which differs primarily in speed of operation in combination with a smooth interface and minimal expenditure of RAM compared to competitors. 500 meters on our body is quite real. The same Android 5.1.1- The port is based on the official (December 2015) 64-bit version of the Doogee X6 Pro and META-INF firmware with built-in root. Working backupto recover from TWRP (what's in the cap!). INSTALLATION 1. Download the backup archiveON THIS LINK. 2. Unpack, we get the folder 2016-03-05_DOOGEE-X6pro-20151214. With all the contents we copy it to the phone's Sdcard at TWRP / BACKUPS / ZTE_Blade_X3. 3. We are loaded into TWRP, we clear the cache, dalwick, systems, date. In the Restore section, select the downloaded backup, restore, boot into the system. FEATURES It works like everythingexcept FMradio. From features - MiraVision (improved image transfer, including moving), Gesture (Gestures) - in the regular launcher, player, gallery, palm over the top of the screen, go to the next position. Similarly, the exit from loxgrin. The camera works better. Memory file managers and PC see in normal volume. Gps catches, Antutu issues more than 24500, Google registers and the Market works. Installed Uninstall Expert (frozen applications - in the Disabled section) or, for whom it is more convenient - in Titanium. "Wallpapers" installed prog Solid. In the frozen - ASUS launcher. Pre-installed 2 extras. set of icons - MeeUI and Mond (for Asus, where there is a choice of icons). Installed the 80th Xposed with improvements (GravityBox, Android Theme Engine) and Amplify.Power Button Advanced Menu- including reboot in recovery (recovery mode) and the ability to take a screenshot. And a few screenshots for clarity. BUT with commented blue and red indicators. Repair FMradio from sanich59. Or try to flash FMradio_Doogee.zip (1.57 MB) . Post has been editedleo2m - 30.03.16, 18:58 Reason for editing: Working backup for TWRP |
Message#17 28.02.16, 20:48 | |
Local [online] Group: Friendssavagemessiahzine.com Messages 230 Check in: 02.10.10 Reputation: 13 | And if you try to remount the memory? What if the flash drive formatted and made it as an internal memory?Memory substitution instructionsmaybe fit? Here's anotherRepartitioning Post has been editedRobonoid - 28.02.16, 20:53 |
Message#18 28.02.16, 21:46 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 382 Check in: 12.10.09 LeEco Le Pro 3 4GB Reputation: 44 | ... And if you try to remount the memory? What if the flash drive formatted and made it as an internal memory?Memory substitution instructionsmaybe fit? Here's anotherRepartitioning The first link does not fit: we do not have such a file "in the / system / etc folder, click on the top of the" RW rights ", open the file vold.fstab with the editor" Here I edit boot.imgWhere did vold.fstab go or how to change mount partitions? (Post sanek922 # 33289549) |
Message#19 03.03.16, 08:28 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 262 Check in: 06.08.12 Honor 6C DIG-L21HN Reputation: 12 | Who knows how to disable advertising from Google in applications? LBE did not manage, although on the tablet the 4th android, there it cuts it on time. Try AdAway, only you need to root, it will not work without it. On the market, no, look here on the site. Post has been editedaleks50-50 - 03.03.16, 08:29 -------------------- HTC Desire S, Lenovo A706, ZTE BladeX3 6.0, LG G2mini, Honor 6C |
Message#20 04.03.16, 19:06 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 219 Check in: 02.09.11 Blackview BV9600 Pro Reputation: 9 | Everything except sd card. internal memory wipe. After an unsuccessful firmware, it was restored from backup, everything is fine. Post has been editedDocenT23 - 04.03.16, 19:07 |
Message#21 04.03.16, 20:14 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 262 Check in: 06.08.12 Honor 6C DIG-L21HN Reputation: 12 | I was afraid to clean something inside and sew on the "dirty" one. Flyme normally got up, maybe something is connected with it, try not to wipe the internal memory with a flash. Although who knows, before that, two of their old ones up and down and never swore at a damaged zip archive. ? I mean the download is crooked. -------------------- HTC Desire S, Lenovo A706, ZTE BladeX3 6.0, LG G2mini, Honor 6C |
mobile version | Now: 04/30/19/06 06:18 |