1.2
Button Eng. menu for mtk only
Improved device detection
1.3
Improved detection of rockchip devices and qualcom
1.5
Tabs
For mtk on 2 tab info from ProjectConfig.mk
Rockchip and mt6752 markup (taken from / proc / partinfo)
I2c device addresses (on settings)
1.6 Upload test
The markup is now on mt6589 and others.
Definition of wifi chip on rockchip.
Error correction
In test mode, loading characteristics in the database
1.7
Improved detection of devices according to the database
Basic samsung support
Updated website and data upload form
1.8
Defining cameras on the qualcom platform (root required)
Sensor detection via Android API (if not found)
On mt6735 + we show only active cameras
Tab signatures
1.9
+ Added the ability to update the component definition database from the program (in the about menu)
The rules for determining devices are in a separate file.
git components+ Improved device detection
+ When changing settings, they are immediately applied.
2.0 (release candidate 3)
rc1
Added a new tab with information:
- CPU (Number of cores, family, frequency, governor)
- GPU (model, frequency, version of OpenGL)
- Memory
Initial CPU support from multiple clusters.
At qcom, root requests only if enabled in the settings. (To identify camera models)
rc2
Release version, added his signature for the application
rc3
Improved stability
On mtk, the config tab is shown only if there is a file.
2.1
Fix upload info (upload)
java vm version
3.0
1) Added new tabs:
1. System
2. Memory (RAM, disks, mount paths)
3. Camera
hardware specifications: trying to determine manufacturer, resolution
Software features: via Android API (for android<5 requires camera permission)
4. Battery
5. Temperature
6. Sensors (Interacts with my Sensor Test 1.2 application and above)
7. Applications (search / filter available)
8. Power supply (PMIC) mtk, regulator (rk, qcom)
2) Updated lists (support updating information and user interaction)
3) From the main tab, you can go to the tab of the camera, battery, sensors, etc.
From the battery tab to the battery statistics.
For mtk for touchscreen gt9xx (and gt1xx) by clicking on the item, shows the chip model
For xiaomi, by clicking on the item, the device shows the add. info if there is (from / proc / hwinfo)
4) Added a navigation bar with a list of tabs.
5) Identify the manufacturer of the memory chip.
6) Definition of the display on qualcomm (from cmdline)
7) I registered the names of the series snapdragon (for the latest models), mtk helio.
8) A combo chip was added to mtk in the wi-fi point.
9) Platform definition by cpu model, if not defined. (mtk: sprout, some lg, etc.)
10) Basic Russian language support. In the settings there is a choice of language.
And fill the base of the device, especially those that are not in it, otherwise I watch the screenshots, but not in the database. I think it is useful not only for me.
Now it is available in the info center menu.
3.0.1-3.0.5 20170212
Fixed crashes when defining clusters
Fix upload info (upload)
Fix crash when receiving gpu freq on mtk
Fix markup rockchip
Fix trash in the wi-fi box on 6582/72
More checks for stability
3.3 20170227
1) Added support for the exynos platform (samsung): definition of camera models, wi-fi.
Tested on galaxy s7. I think on s5, s6 too, on the rest it is necessary to test.
2) Improved cluster detection. Now I think many should work. On s7 correctly determines.
3) Added definition of audio chips and nfc.
4) New tab with info about wi-fi connection.
5) Improved component detection based on test results.
6) qcom camera with core<= 3.4.x take from the drivers of the platform.
7) I tried to fix the crash when i2c and root were turned on after the program had been minimized.
8) Added a check for the presence of / sys / bus / i2c / drivers / On some devices with 7.0, there was a drop due to the fact that selinux prohibits reading.
3.3.1 20170301
- Off use of database components from file
- Fix cluster definitions (mt6752 8 cores)
- Fix the drop when reading voltages.
3.5.0 20170330
1) Added input device tab.
On mtk, it shows the goodix model and firmware version. Perhaps for others to be.
You can see if the name of the wheelbarrow can be there and for those who have a common name, such as lge_touch.
Maybe the sensors. On rockchip shows me.
2) Initial support for Huawei HiSilicon. Display definition (from cmdline).
On some devices all supported cameras.
At the point of drivers, on most devices there are supported displays.
3) Improved component definition.
Some displays on the qcom platform from samsung, htc were not previously determined.
Improved detection of 2 in 1 sensors (accelerometer + gyroscope)
Improved component definition for samsung devices.
Added cameras toshiba, panasonic.
4) At 7.0+ where it is not allowed to read the sysfs message about it.
Apparently you will have to read using root in this case.
5) New application icon.
4.0.0 20170508
Device Info (Post ANDR7E # 61209316)4.0.5 20170516
Flash drive detection via scsi (Galaxy S8, Huawei Mate 9)
Sony - model name added (Xperia)
Definition Snapdragon 653. Added a few more models.
4.2.3 20170731
- Huawei qcom: improved support.
- List of supported cameras with producer and resolution. By clicking on the item.
- Samsung exynos: added gpu frequency.
- Qualcomm: display definition without root via sysfs.
- Navigation bar: mtk engineering menu instead of floating icon + xiaomi cit menu on qcom.
- Updated detection components and fixed bugs.
- Compiled with new sdk.
- Resolution is now considered without soft keys.
- Autofocus on mtk android 6.0
- Updated sensor tab (Sensor Test 1.4+ required).
- Added a list of i2c devices grouped by [PRO] bus.
4.5.0 20170919
- Updated tabs view.
- Screen tests (color, multitouch, touch drawing)
- Current core frequency.
CPU Monitor, open on the CPU tab on the item frequency.
- Dark theme supported (14 days or PRO)
- Updated detection components.
- Optimization of work.
- RAM + zram / swap from the kernel (meminfo)
4.6.X 201711XX
- Updated detection components.
- HiSilicon: GPU frequency added.
- HiSilicon: we try to identify the cameras (need root, there is info on mate 9).
- Asus qcom: we try to identify cameras (on sd630 there is).
- Added info about memory markup for some platforms.
(On 5.0+ if root is enabled, partition names are available)
- Added screen color tests.
- Added a tab with USB devices (Connected via otg + sometimes mb wi-fi module)
- CPU time at different frequencies (by clicking on the item number of cores)
- System: device features included in the firmware. A list will open.
- System: add. infa (by clicking on the item signature)
(mtk modem, memory for java vm, boot state, additional info from vendor, samsung, lg ...)
- I tried to fix the error with opengl on some devices.
- More details defines mt6757 P20 series
=>P20 / P20 series / P25 / P25 series
4.7.0 201712XX
- Updated detection components.
- ZTE, BQ qcom: we try to identify cameras (on sd820 there is).
- A new method for determining components for devices from 7.0 / 7.1, where reading sysfs (qcom, hisi) is prohibited.
4.8.0 20180214
- Updated detection components. Improved component detection for 7.0 / 7.1
- For some devices, added the size of the ROM.
- Error correction.
4.9.4 20180403
- Updated detection components.
- Improved support for Galaxy S9 (exynos9810, sdm845)
- qcom: improved detection of supported cameras
(for new devices msm8996 / sdm6xx at the end of '_cust' for the most likely)
- qcom: no root is required to define partition names (for 5.1 devices and others).
- Error correction.
4.10.1 20180420
- Updated detection components.
- Fixed component detector for sdm6xx on 7.x
- Section names for mt65xx on 4.4
- Fingerprint sensor detection by spi
- Test detection of wi-fi, ethernet for amlogic, etc.
- Fixed hang when on. root on M6 Note
- Identifying cameras on some OnePlus devices
- Bugs fixed
4.11.2 20180508
- Updated detection components.
- qcom: New camera detection method (does not require root)
Should work on 5.6 and 7.0+ where reading is not blocked.
- Determination of the number of mali gpu cores for some devices
- mt6763: all cameras must now be determined
- Additional info about the camera (software)
- Error correction
4.12.3 20180626
- Updated detection components.
- qcom: New method for detecting cameras with root for 7.x / 8.x
- mtk: New display definition method for 3.18 kernels
On 6.0 and most 7.0 without root
- exynos: New method for determining the frequency of gpu, ufs chip for new models (tested for galaxy s9 +)
- Improved CPU definition for rockchip, amlogic
- Fixed definition of kirin 970
- Error correction
4.13.x 20180812
- Updated detection components.
- Determining input devices now for 8.x
- For 7.1 and below, the partition mount list. On the markup tab, click on the title.
On the new system you can see the system a / b
- More information is available for 7.x / 8.x with root
- For 7.x / 8.x added experimental detector components.
For qcom:
- New method for determining the frequency of gpu without root on 7.x / 8.x sdmXXX
- Improved battery model detection method
- New method for determining supported cameras for sdmXXX
- Error correction
Version 4.14.x 280818
- Identify supported cameras for sdm845
- When activating camera2 api, the aperture value and iso are available.
- For mtk 7.0+, who has blocked the reading of supported cameras, you can copy the library libcameracustom.so into the program folder, it will read from there.
Version 4.15.x 041018
- Updated expert detection components. detector for 7.x / 8.x without root. According to the results of those who poured into the database.
- If root is enabled on 7.0+, the drivers tab will return (but there will be everything, not only active, with root too slow)
- For Spreadtrum 7.0+, who has blocked the reading of supported cameras, you can copy the camera.PLATFORM.so library (sc8830, etc.) to the program folder, read it from there.
- Error correction
[PRO]
Improved report:
- Added info c input device tabs and wi-fi
- Added button to send, allows you to send a report to the mail (as a file)
- At the bottom is attributed to which version of the program the report was created
- Fixed encoding page title
Version 4.16.x 051118
- Updated detection components
- Improved memory support for new cpu
- Added codecs tab
- On 8.x Definition of a sound card without root (qcom, hisi)
- kirin980 architecture definition
Version 4.17.x 011218
- galaxy s9 sdm845 display, supported cameras
- For Qualcomm, the definition of the name of temperature sensors has been added, root is required and this feature is enabled in the settings.
I, for example, replace tsens_tz_sensor12 with gpu, and 5 sensors for cpu.
Version 4.18.x 17012019
- Updated detection components
- HiSi: display definition with root kirin960 +
- HiSi: determine the type of display oled / amoled or ips / lcd
- HiSi: supported cameras kirin970 +
- sdm845: Display definition for lg, xiaomi where not locked.
- Started an improved component definition for x86 laptops
[PRO]
- HiSi: the definition of the camera model from the data from the photo (exif).
In the Info Center menu, select a photo, show info. You can select and copy data.
Version 4.19 04032019
- Updated detection components
- Improved definition of snapdragon 855, exynos9820, Helio P70
- kirin970 + definition of supported cameras
- Error correction
Version 4.20 29032019
Improved support for snapdragon 855, 712, 675; exynos9820, Helio P70
New version 4.21 27052019 - 27062019
- Updated detection components
- On the system tab, now the release of android (corresponds to the API) There are fake versions of android prescribe.
- For xiaomi sdm855 c root, who had 2 cameras out of 4, should all show up.
- Tried to optimize a bit
- sdm730
4.22
- Improved device definition for android 9.
- Snapdragon 855+, 665. Added L3 cache for CPU
- Added camera 2 api camera features:
Pixel size (who has the wrong resolution, do not look at the resulting value)
Viewing angle (horizontal)
Color Filter Arrangment