[X]Assistant

[Realyoti]

6.61 Infinity (infinity)
hybrid 6.31 / 6.61 firmware from Davee

1. Introduction
   In this manual, we will consider installing a hybrid firmware, which allows you to “fix” custom firmware 6.61 on all PSP models, except for the PSP-E1000 “eunuch”. Understanding your model will help.this theme.
   
   
   
2. Warning
   As with any intervention in the console’s memory, there is a risk of a console crashing. Therefore, before starting the action, make sure that the console is charged at least 78%. It is also advisable to keep the charger cord connected during the entire process. Authors of other instructions are strongly advised not to use old versions of the temporary custom for installation and use. From myself I will add a recommendation to disable all plugins.Obviously, the use of files for monoblocks on the slider and vice versa is guaranteed to lead to damage. Well, remember that sticking with a fake card -CVDF! The forum as a whole, as well as the author of the instruction in particular, is not responsible for any failures, all at your own peril and risk.Go!
   
   
   
3. Training
   Before starting the console should already be stitched. It is recommended to use the current version 6.6x PRO-C2 andPROMOD-C2p(comply with instructions on clause 10 inclusive), as well as 6.6x ME / LME-2.3. During installation, the internal memory will be completely cleared and overwritten, but the process will occur from under the firmware already running in the RAM.
   
   Next, download the archive:
   
   • for monoblockinf100_cfg037.zip(64.92 MB)
     
     
   • for sliderinf100_cfg037-go.zip(57.03 MB)
     
     
   
   Unpack it in the root of the memory card or internal memory of the PSPgo. Run from the menu "A game"Program"6.61 Infinity Firmware Builder". In it, we begin the process of creating a hybrid firmware by selecting the item “Build Hybrid Firmware»Pressing the buttonCROSS. We are waiting for the end of the process, exit the program. Then move the file<console>/PSP/GAME/MAKER/DATA.MFCto folder<console>/ PSP / GAME / FLASHER /(we get the full path<console>/PSP/GAME/FLASHER/DATA.MFC).
   
   
   
4. Installation
   Rereading "Caution" again. If all conditions are met, then run the second program - "6.61 Infinity Firmware Flasher". We agree to the installation of hybrid firmware by selecting by clicking onCROSSsingle item "Start"And then confirming once again your agreement by pressing againCROSS. At the end of the process (when using PSPgo memory it will be faster than when starting from a memory card) agree to restart the console. If this does not happen within five minutes, perform the on-off process yourself. Most likely, when you first turn on you will be greeted by a blue screen of death settings. Just confirm the recovery by pressingA CIRCLE. RemoveBuilderandFlasher.
   
   
   
5. Fastening
   Now you can check the software version in the settings. At the end of the line should appear the symbol of infinity - the figure of eight lying on its side. This means that everything turned out! Now we have a naked hybrid firmware on hand. Once again install your favorite temporary custom firmwarestrictlyversion 6.61(it's PROMOD, right?) -onlyinstallation file itself, norecoveryandlauncherNot needed! Then we run the latest program at the moment "Infinity Bootloader Configuration". In it we pressLEFT ARROW, then mark (put an asterisk) buttonCROSSon that custom we want to fix - "PRO CFW by Coldbird" for PRO and PROMOD or "ME CFW by neur0n" for fixing the LME. Exit the program through the menuHOME. Everything in the "Game" menu associated with custom firmware can be deleted.
   
   
   
6. Downgrade
   If on version 1.02Error 800200D9 gets out when you start the game images, then you need to roll back to version 1.00.
   Instructions here:[PSP] 6.61 Infinity - installation of permanent custom firmware (except for E1000) (Vadrozh # 47711027)
   
   
   
7. Complete removal
   
   1. Rereading "Caution" again.
      
   2. Download the archive:
      
      • for monoblock:chronoswitch_7_0.zip(31.49 MB)
        
        
      • for slider:chronoswitch_7_0-go.zip(27.2 MB)
        
      
      
   3. Unpack it in the root of the memory card or strictly internal memory PSPgo.
      
   4. Run the program "Chronoswitch downgraderпїЅ.
      
   5. We agree with all the information by pressing the button.CROSSthree times.
      
   6. Waiting for the appearance of the standard firmware installer from$ ONY.
      
   7. Follow the instructions on the screen. We agree to restart at the end.
      
   8. As a result, the device will have a clean firmware, without Infiniti and custom.
   
   
   
   
8. Conclusion
   That's all!
   
   Infinity features

   If you place the recovery menu as ms0: /infinity/recovery.prx, then when you turn it on with clampedLit will start. At the time of writing, there are no such menus. There is only a rollback version.
   
   
   Known Issues

   • The pause function of the game does not work on PSPgo - fixed in version 1.02
     
   • Background picture disappears when using third-party PTF themes - not verified
     
   • Custom themes in CTF format (CXMB plugin) do not work - there isfixed plugin
     
   • Error 800200D9 when running game images - jamb version 1.02, roll back to 1.00
     

   
   
   
   

A source
Source

Attached files

inf102_cfg039.zip(64.92 MB)
inf102_cfg039-go.zip(57.03 MB)
recovery.zip(13.16 KB)


Post has been editedRealyoti - 28.01.19, 16:35

[set48]

Wow, wow, something else is going on in the universe !!! : D

[Realyoti]

set48,
And how. Even in this manual I have something to add. Just initially it was written universal on two forums.

[cooler.nvkz]

M

temporarily moved to the PSP section - Firmware

[Vadrozh]

RealYoti,
And what about the downgrade on the official?

[Realyoti]

Vadrozh,
that's what i forgot! =) I'll check later.

[YadroPDA]

Squeezed when you turn on the Home launches OFW

Post has been editedYadroPDA - 26.02.16, 15:27

[aRKei]

RealYoti,
Just checked on my 3006 - everything is ok.
The question remains, after all this installation, what can be removed and what should be left?

[Vadrozh]

RealYoti,then that
I just do not want to do a permanent without knowing how to downgrade to the official.

[Erikpshat]

aRKei,after installation, you can delete everything from the card, because custom firmware is installed and fixed in the internal memory chip, and not on the memory card. Just format the card.

Vadrozh,the downgrade process from 6.61 (OFW, PRO, PROMOD, ME) is absolutely the same, simply because the kernel is still defined as 6.61.

[Vadrozh]

ErikpshatIe do not need to delete the hybrid firmware itself? Just uninstall via PROMOD installer?

Post has been editedVadrozh - 27.02.16, 12:56

[Erikpshat]

Vadrozh,Why remove the hybrid? If you remove PROMOD, after fixing the firmware through the configurator, you will get a brick (brick), because the hybrid will search for custom firmware files for download that you deleted.

If you are talking about DAUNGRADE, then this word (downgrade) means lowering the firmware. To which I tell you that downgrade is done in the usual way, as has always been done. It should be used EXCLUSIVELY! latest version of downgrader:Chronoswitch Downgrader v7 (source). Only in this way can you roll back to the official firmware. It is even possible from 6.61 CFW to 6.61 OFW (I did not personally check it myself).

Change History Chronoswitch Downgrader v7

Chronoswitch downgrader
https://lolhax.org

[VERSION 7.0]
->Added support for Infinity

[VERSION 6.1]
->Added support for 11g units to 6.60

[VERSION 6]
->Added support for 6.61

[VERSION 5]
->Added support for 09g units to 6.20

[What does it do?]
PSP using the Sony Updater.

[How do I use it?]
Copy the "PSP" folder to your PSP. The downgrader is "signed" and can be launched from OFW XMB. You need to copy the 6.20 to PSP / GAME / UPDATE / EBOOT.PBP and for PSPgo. After setup run the downgrader and follow the onscreen instructions.

[What does it technically do?]
6.20-6.35: It uses the PRX running. This PRX uses the pspdecrypt functionality to decrypt the updater PRX when needed. This allows the updater to boot in the newer firmwares.
6.38 / 6.39: It uses my http_storage exploit to gain kernel access. Basically, http_storage has a vulnerability in it, where I can write -1 to anywhere in memory.
6.60: Uses sceNetMPulldown to gain kernel access.
6.61: same as 6.60 (only certloader kexploit is patched in 6.61)

[Credits]
Davee - legend. Originally made 6.35 / 6.31 downgrader
some1 - legend. 6.38 / 6.39 / 6.60 support.
bbtgp - legend. Continued updates to psardumper (pspdecrypt) and the signing application "prxEncrypter".
coyotebean - legend. Consumed updates to psardumper (pspdecrypt) and cryptographics.
kgsws - legend. First application signed and method released.
Silverspring - legend. Lots and lots of info on KIRK where we'd still be in the dark.
Bubbletune - BTCNF
qwikrazor87 - 6.61 / 11g support.

[READ]
You run the application at your OWN risk. This software is free and has no warranty.

[Open Source]
Chronoswitch is open source! Get the source here:https://bitbucket.org/DaveeFTW/

[Twitter]
Follow me on twitter: @DaveeFTW

Post has been editedErikpshat - 27.02.16, 14:03

[spok176]

Good day. And about the E1000 there is information?
I understand that is not supported. But planned?

Post has been editedspok176 - 27.02.16, 17:02

[your1]

spok176 @ 02.27.2016, 18:01

And about the E1000 there is information?
I understand that is not supported. But planned?

Not,Infiniti cannot be made for E1000 PSP Street.
It may be that for Strata will come up with something else, but so far there is no such information.

[Vadrozh]

Erikpshat
Thank. Turnip raised. On Monday, put the infinity.

[Vadrozh]

So, I flashed my 3008 4g. At the moment, only OFW is running with the HOME button held down. Without the HOME button being pressed, the PSP turns on, the matrix is ​​highlighted, accesses MS and turns off. The card is not fake.

[Vadrozh]

I deleted PROMOD, I try again ... In the bootloader, I extracted PRO CFW.
Does not want to work PROMOD. Ndaaaaa.

Post has been editedVadrozh - 29.02.16, 05:19

[tupcha]

Vadrozhis the client dead? How is it going?

[Vadrozh]

tupchaNo, there is no brik, I turned off the binding and now the old-fashioned way through Fast Recovery.
Now I’ll try Infinity again.

P.S I think to shake the console with this firmware a small chance

P.P.S Karoche reinserted infinity and promo, it still does not work

P.P.P.S The **** plug-ins are to blame for everything. Disconnected everything and the console starts ...... How to use this thing?6.60 plugins on 6.61

Post has been editedVadrozh - 29.02.16, 11:20

[Vadrozh]

The culprit was plug-in JoySens. Disabling it in VSH and ZYZa starts successfully.

[tupcha]

Is it in the recovery menu?

I have this menu VSH in Chinese .... how to be? ...