DiscussionSmart TV Duo Tv box TV box on the chip RockChip RK3066Discussion пїЅ Specifications
Operating system Android 4.1 JB
Processor RK3066 Dual ARM Cortex-A9 1,6 GHz
1Gb DDR3 Memory
Internal memory 4Gb
Graphics Quad Core Mali-400MP HDMI 1.4
Network Wireless 802.11b / g / n
Support TF card Micro TF 1-32GB
Data Port MicroUSBx1 (for power supply and connect to a PC); USB2.0 Г— 1 (for power, device connection); HDMIx1; MicroSDx1
Audio AAC, AAC +, eAAC +, AMR-NB, AMR-WB, QCP, MP3, WMA, WAV, MIDI, M4A
Video WMV, ASF, MP4, 3GP, 3G2M4, AVI, MJPEG, RV10, DivX, VC-1, MPEG-2, MPEG-4, H.263, H.264
Youtube android app, Twitter, Angry Birds, Office, Gmail, Browse, Skype etc.
HDMI 720p interpolated up to 1080p
Dining With microUSB cable 5v 1AhThe device is extremely sensitive to the power supply. Defective blocks can not issue the stated value. I recommend unit 2Ah
Acquisition device extension cord HDMI, power supply, cord microUSB (for power supply), remote from and qwerty keyboard airmouse
Dimensions 9.7 * 2.8 * 1.2 cm
weight 0.2kg
Driver, software, root
RK Remote Control manage the prefix from your smartphone / tabletAPK ekslyuzivy for RK 3066,3188 will describe laterDrivers for windowsfor windows 10 folder win8
rk batch toolsensing one flasher IMG file
rk develop toolfirmware flasher unwrapped a set of files
unpackerrk develop tool from RK31hh unpacks and packs IMG from a single file; flashing our device refuses
rootexcept 4.4
SU RK30661. Install the driver;
2. In the setting of the item USB - PC connection;
3. In Task Manager, make sure the devices that the console is correctly connected;
4. Run the bat file;
console reboots, window will report "press the space bar after reconnecting5. We are waiting for the download of the desktop and repeat steps 2, 3 and only now we press space bar;
6. Prefix reboot again, repeat steps 2, 3, only now everything takes longer, but on the console files are copied.
A total of three times, the device will reboot and will SuperSU.
FirmwareAndroid 4.4 30.04.19
Google services at present in all firmware versions.1. Downloading the driver and rk batch tool from the spoiler above
2. Parse off the device from the end of the memory card, there is a button.
3. Hold the button and connect the device to your PC
4. The unknown device, specify the driver installer itself the driver itself.
5. Downloading firmware lower razarhiviruem.
6. Run RK Batch Tool, shows him the path to the file img firmware.
7. Push Restore, if the firmware is different; push update, if the firmware is the same as on the device.
IconBit 4.2.2 RK 4.2.1 Stock 4.1.1for R2No one in a personal way and not unsubscribedDREGOV-ROM 4.4.2
Koryavenko beta, but still android 4.4.
Not friendly with viperfx. There are a bunch varintov memory layout. It is working smarter than all the above firmware. TRWP, SuperSU inside.
Firmware is very demanding on the power supply - highly recommend unit 2A or USB TV (block preferable). With bad block 1A can escape prefix in cyclical reset, even if the previous firmware problems were not Ugood UG802very similar device, with this thread, I found a firmwarefirmware manualI'd add that the Russian is already inside, in line parameter to select the desired volume / data
It is necessary to solder 2 pins circled column red circle, otherwise it will not work wifi. If you wish to return to an older firmware is not necessary to unsolder anything (in the words of the Polish author, did not check).
Polish original themefirmware download Useful
Team Win Recovery Project 2.7.0.0
Advantages:
1. Management of the keyboard and mouse (the drain can not be controlled)
2. backups with compression
3. File Manager with access to the entire file system (Android OS partition / dev blocked even root)
4. Terminal
Installation:
We need your current firmware from the spoiler above, twrp file, RK Develop Tools
TWRP_1280x720_rk3066.img(3.58 MB)
1. Open the RK Develop Tools - tab "Options" - Flash - "..." (pointing to the firmware file img) - unpacking. The program folder unpacked firmware will appear in the output folder
2. Go to the tab to create an image, give the output folder to the state, as indicated in the program (for example: Output \ parameter)
3. Change the file to a recovery twrp retaining the original file name
4. Connect the device to a PC, in RK Develop Tools click "regime change." The "found Loader"
5. Remove all except the crows and recovery parameter and click "Run"
6. Upon completion loaded in the normal mode, and swing any program to restart in recovery.
For example: link2sd, quickboot
Possible problems:
Not connected to the PC in recovery.
The image extends beyond the screen width: tune the television.
xposed installer
Tested on firmware and drain of Toucan Stick G2.
Subject exposed. Installing version 2.6.1Proven modules: Gravity Box, XMultiWindow, XInstaller.
On the remote
Connected to a PC, other Android with OTG support.
Gyroscope calibration:
1. Put a control a known flat surface;
2. Simultaneously press and hold the cursor left + "G"
The flashing blue LED indicates that the calibration of the sensor is made.
If Light has come into disrepair:
Push the button on the remote simultaneously for 1 second, the cursor UP + CURSOR DOWN the ENTER +
LED will blink blue
Connecting a new beacon to the set-top box, or computer
After a few seconds, if the receiver code is correct, the LED stops flashing and the cursor appears on the screen
With strong brakes system and (or) regular departures applications recommendmicrog. Also help manual removal of all system applications related to Google services There is no curator in the subject. For questions about filling caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links. Post has been editedMuxa92 - 30.04.19, 20:24Reason for editing: Android 4.4