Fer_Demk1, What did I install firmware and ...
SATISFIED)))
Cyan 13 has justified itself ... a lot of settings, a great flight of imagination, what are the themes alone, convenient root access (you want on, you want on) all the pluses from the 6th android ...
So now the short FAQ
First pros:
1: a large sweep of settings and in general everything,
2: the fingerprint scanner began to work even faster and that is important only when the lock screen is on, which in turn means that the charge will be spent less.
3. efficiency, the battery holds much better.
4. Screen brightness, the minimum has become even less and it's nice ...
And now about the bad:
1. event indicator does not work ...
2. There was no Google play and I had to tinker with its installation ... Since it’s not so easy to pick up a working Gappps package
3. The camera is not very good, better than the stock from the elephons, but I'm used to fv-5 and now it’s still far to her ...
4. Animation is very sadly adapted, there are twitches and hangs, but I was able to cure this by putting the Nova prime launcher, gave him the root of the law and all the problems with animation were solved, in other matters Elephonians also had them there ...
In general, this is all for now ... Here is a link to a working package.
http://opengapps.org/?…m&api=6.0&variant=picoWe expose the following settings:
Platform ARM 64
android 6.0
Pico version
Install gappps like this:
Installing TWRP recovery from the header
We go in and make wipes (there’s nothing to do there is no need for him, he himself suggests doing the necessary reset and we just confirm with a swipe)
After we put the firmware cm13
We start the mobile phone with the installed cm13 and click on it that they will ask ...
After, as everything gets up, turn off the mobile and go into the recovery and again do the wipe
After we install Gappps and we are all happy)))
In principle, this firmware suits me more than stock, so if even the indicator had been corrected, I would have put the bricks in place)))
Here are screenshots here:
https://yadi.sk/a/QK4Rctj3uU5aWToday I found out that in the performance menu you can only change the calculation algorithm, that is, you can choose between noop sfq and deadline, the schemes are blocked, it is interactive by default, and you cannot change it, although the min and max frequency threshold changes without problems, I’m off interactive would choose ondemand ... sad but so ...
Nashol is another small under-manager, it is connected with sms, they are not sent because the sms center number is reset, but the trouble with the sms application of the messenger is not possible to enter it, it is treated this way:
1. Speak into the dialer and dial * # * # 4636 # * # * after the menu opens
2. press the information about the phone and below in the column with the name SMSC, next to two buttons: update and update, first we press the update if the operator is bona fide, then the SMS center number should fit in itself; if not, enter the SMS center number for mts is +7 916 899 9100, and at the end click update to apply the new settings.
All you can now send SMS ..
Found how to fix bugs with animation without installing other launchers.
we put the Seeder program we expose such settings
1 tick on
2 tick off
3 tick on
After we set the entropy to low
And turn on the seeder button at the very top of the program ...
All the interface is no longer logical, and the response has become much faster ... If someone fumbles, you can replace the seeder with the entropy generator and tinker with the settings manually, I think it can wake up to achieve even greater performance ...
I hope the able people will hear and correct me !!
Post has been editedsevervolk - 27.08.16, 19:16Reason for editing: raised in the topic header