[X]Assistant

[Shaggyboggart]

Digma Plane 7.7 / 7.71 / 7.8 3G - Official Firmware
Digma Plane 7.7 / 7.71 / 7.8 3G
Description пїЅ | Discussion пїЅ | Firmware пїЅ

Drivers and Utilities

Drivers + Flashlight + Recovery EMEI

Official firmware

Update Plane 7.7 / 7.71 / 7.8 3G dated 02.27.16 ->>>- for FT and recovery
OTA Update, Plane 7.7 / 7.71 / 7.8 3G dated 12.22.15 ->>>- for recovery
Factory firmware for PC installation ->>>- For FT
FTP server with firmware:
Plane 7.7 3G ->=>
Plane 7.71 3G ->=>
Plane 7.8 3G ->=>
Factory firmware (from 05.31.2016) + OTA

Unofficial firmware

123

Other

Test AnTuTu Plane 7.7 3G ->>>

Instructions

Getting ROOT rights without a PC ->>>

miscellanea

123

Screenshots

Plane 7.7 3G factory firmware

There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedVlad J.S. - 17.12.16, 19:37

Reason for editing: Factory firmware (from 05.31.2016) + OTA

[Shaggyboggart]

Firmware upgrade
Plane 7.7 / 7.71 / 7.8 3G
installation through stock recovery
OTA updatefrom 12/22/15

Changes

Android version 4.4.4

The list of changes is extremely extensive. In fact, it can be considered just a completely new firmware.
Some changes:

• - General performance optimization
  
• - Fix vulnerabilities (Stagefright, kernel, selinux)
  
• - Added the ability to use Yandex.DDNS (Family mode, turns on in developer mode). Prevents the opening of sites with adult content.
  
• - Added the ability to turn on the Superuser mode (Disabled by default), isolated acl in the off state, allows you to work in Sberbank Online, VTB24 online applications, etc. In the on state, allows you to work with ES Explorer, allows you to install SuperSU. Attention! After installing SuperSU and updating the binaries, functions of working with the Superuser will not be guaranteed by the system logic, besides the active Superuser mode will be detected by applications (Sberbank and etc.) (enabled in developer mode)
  
• - gapps updates
  
• - Repair memory leaks
  
• - Fix WiFi
  
• - GPS fix
  
• - Improved video support
  
• - Improved job stability
  
• - and much more...

Installation

Update via Recovery or via Settings-System Update

• - copy the update file to the tablet (to the internal memory or SD card) without unpacking!
  
• - Open Settings - About Tablet - System Update - Select Local File
  
• - Specify update file

To update, you must comply with the following conditions: the tablet must be charged more than 50% and connected to the charger.

These updates are also available by air: Settings - About tablet - System update - Check for updates

After performing the main update, it is strongly recommended to reset the settings to factory settings.(Settings - Restore and reset or Recovery / Wipe Data Factory reset).
Applying a patch over the main update does not require a reset.

Download

Plane 7.7 -CRY
Plane 7.71 -CRY
Plane 7.8 -CRY

P.S. What caught my eye after installing the update:

• In the curtain appeared toggle switches for on / off. internet with sim card.
  
• The item "Sim manager" appeared in the settings, the item "Enable ROOT" appeared in the settings for developers.
  
• Improved at times the quality of communication WiFi, GPS, 3G.
  
• RAM has grown from 725 MB to 902 MB.
  
• A 247 MB ​​SWAP partition has appeared.
  
• All Yandex trash and a couple of Google applications disappeared.
  
• Updated GAPPS (google apps).
  
• Search widget on the desktop was replaced by Google.
  
• Standard file manager, was replaced by ES File Manager (Free).

Post has been editedxxxsadistxxx - 15.03.16, 13:17

Reason for editing: Updated links

[Shaggyboggart]

Test AnTuTu - Plane 7.7 3G - Factory firmware

Test AnTuTu - Plane 7.7 3G - firmware from 12/22/15

Post has been editedxxxsadistxxx - 20.02.16, 01:21

[Shaggyboggart]

Factory firmware for PC installation
Plane 7.7 / 7.71 / 7.8 3G

• Plane 7.7 3G -Download
  
• Plane 7.71 3G -Download
  
• Plane 7.8 3G -Download

Post has been editedxxxsadistxxx - 15.03.16, 13:14

Reason for editing: Updated links

[Shaggyboggart]

ROOT rights without a PC

Available after updating the firmware (in the factory it is not).

1. Open the settings and go to the item "About phone"
   
2. Tap (click) 7-10 times on the line "Build number", until the appearance of the inscription "... You have become a developer."
   
3. Go back to the settings, see below the item "For developers."
   
4. We go and from above in the right corner, we shift the slider, thereby activating these settings.
   
5. Put a tick "Enable ROOT".
   
6. Install the SuperSU application from GooglePlay.

P.S.
В® SuperSU
In the settings, I recommend removing the checkmark from the item “Create a name space” (otherwise ROOT may not work properly, for example in Titanium Backup, backups are created, but there are no backwards and do not convert applications to system ones), allow auto access and install the application in the system.

Post has been editedxxxsadistxxx - 21.02.16, 00:52

[Shaggyboggart]

Tools for devices
on processors
Intel

Drivers

Installation

Install in spec. mode - "Disable digital signature verification."
In Google it is not difficult to find what it is. It may help to install / uninstall drivers:... Install / Uninstall ... ... disabling digital signature verification ...
I had the first archive. The installation was successful on XP, W7, W10. Installed as follows:
Turned off the tablet, clamped both volume keys + on. I plugged the cable. Install the driver.

Download

1. Drivers_FW_Update.zip(6.94 MB)
   
   
2. IntelAndroidDrvSetup1.9.0.zip(8.88 MB)
   
   
   Intel Drivers Description

   This includes the IntelВ® Atom в„ў x3 processor and the x5 processor (* / / devices);
   Supported USB profiles
   
   USB device driver package, plug in your Android device. USB profiles via the Intel Android USB Driver package:
   
   ADB (Android Debug Bridge): This is the debug interface of Android. It is mandatory.
   MTP (Media Transfer Protocol): This is the Windows * protocol to facilitate the transfer of media files.
   PTP (Picture Transfer Protocol):
   RNDIS: This provides a virtual Ethernet link using phone network.
   CDC Serial (Modem AT Proxy): This is a virtual com port.
   
   
3. Driver_1.zip(8.78 MB)
   
   
4. Driver_2.zip(583.28 KB)
   

Flashlight

Instruction + program

Firmware_update_manual_SoFia.pdf(626.47 KB)
Digma_SoFia_tools_pack_v4.150.rar(4.58 MB)

EMEI Recovery

Instruction + program

IMEI_recovery_manual_Digma_Intel_SoFia.pdf(571.51 KB)

Link to the program- 150 MB

Post has been editedxxxsadistxxx - 23.02.16, 17:17

[vsemukhin]

I have a kernel version dated 12/22/2015
3.14.0 ddix
Updated by air. Model 7.7

Post has been editedvsemukhin - 23.02.16, 08:12

[kotvot]

update from 02.22.2016 on Digma Plane 7.8 took out the battery for 12 hours in standby mode, the case heats up in a dream very much. it looks like a cant with firmware.
Zy.na 12/22/15 in standby mode 7-8 days, 4-5 hours of video through wi-fi. The difference between the new and old firmware in the amount of boot and recovery, the rest is the same.
zyy.reproshil the factory (turned out the first time) IME did not fly off, correspond to the sticker on the box, and the serial number of the other. I can not lie.
I tried to update from the factory by air, the process went, but the version of 12/22/15, that is, it seems that from 02/22/16 it's some kind of left.

Post has been editedkotvot - 23.02.16, 17:05

[Shaggyboggart]

kotvot
Sadness, I have deleted this nightmare so far. for there are suspicions that this is not completely updated, but more like a December update, only repacked under the PC.
Yes, and with bugs.

[email protected], 12:20

It seems that from February 22, 16

This firmware sent those. support after writing to them.

Request! If anyone sees CWM or TWRP under our processor, beacon.I will try to port to us.

Post has been editedxxxsadistxxx - 23.02.16, 17:24

[kotvot]

xxxsadistxxx @ 02.23.2016, 16:57

This firmware sent those. support after writing to them.

I mean that officially it is not on their site, factory and from 221215:http: //www.ddixlab.com...ane/plane_78_ps7008eg/
Shl. I'm not a reproach, and I did not want to offend, just to warn others that they would not be blown up on this mine.

Post has been editedkotvot - 23.02.16, 18:00

[Igor0000000]

kotvot
I do not advise to put it on the same, as I started having problems with nutrition right away.
although they offered this to my appeal about the firmware on Plane 7.71 3G (ps7071eg)

Post has been editedIgor0000000 - 23.02.16, 19:17

[msergm]

Lord And you would have unsubscribed about these problems also in the relevant topic onforum ddixlab
Maybe this information will reach the developers faster ...
PS it’s good that I didn’t manage to upgrade to the fota version, but I didn’t manage to deliver fls - I read about your problems.
However, I already wrote about my problems to ddixlab :)

Post has been editedmsergm - 23.02.16, 19:29

[msergm]

Regarding OTA update from 02.22.16 for 7.71, I have already written on ddixlab, I will partially duplicate it here, m. who is useful :)

I downloaded an update for 7.71 ps7071eg_a44_20160222_fota.zip.
I bet. I get a message as a result:
This package is for "PS7071EG" devices; this is a "PS7007EG".
E: Error in /cache/ota_update.zip
(Status 7)
Installation aborted.
And everything would be fine ... Only the device I have is 7.71 and has been updated to this time normally.
What would suddenly become recognized as 7.7?
In fact, it doesn’t go as far as updating, of course.
Everything stops at the stage of checking the device in updater-script ...
Here is how it looked in the update from 12/22/2015

getprop ("ro.product.device") == "PS7007EG" || getprop ("ro.product.device") == "PS7071EG" || abort ("This package is for \" PS70xxEG \ "devices; this is a \" "+ getprop (" ro.product.device ") +" \ ".");

But already in the update of 02/22/2016

getprop ("ro.product.device") == "PS7071EG" || abort ("This package is for \" PS7071EG \ "devices; this is a \" "+ getprop (" ro.product.device ") +" \ ".");

So this is what it didn’t matter what kind of PS7071EG or PS7007EG device (were the updates the same?), Or did the recovery return the PS7007EG value instead of PS7071EG on the 7.71 device?
And now there is a check strictly on PS7071EG and the script returns in response from the PS7007EG recovery. Cool :)

Post has been editedmsergm - 23.02.16, 19:47

[msergm]

Yes, really ... The guys there make mistakes ... But, it's better that way, than not at all :)
Although, it’s necessary to test your software creation by yourself (well, at least a little) and not experimenting with users :)
And cockroaches - yes, noble :)

[MemoAlex]

[email protected], 19:42

But already in the update of 02/22/2016

- it’s amazing why people don’t try to understand the reasons, but they are in a hurry to draw conclusions about mistakes))). Maybe you just do not have complete information? ))

Post has been editedMemoAlex - 23.02.16, 21:56

Reason for editing: framed as offtopic

[kotvot]

I decided to experiment, Plane 7.8 3G flashed with third-party firmware from Teclast X70 3G (Teclast X70 - Discussion (Post xxxsadistxxx # 47366615)). Launched, but the camera does not work, the radio plows, it comes into Google Play, the waffle Razik has fallen off (rebooted, plows), the igralin "Battle 3D helicopter": girl_cray: doesn’t want to go to any one, communication and others I did not check the body of the lotion (I do not want to pull the SIM card). The battery consumption is higher, 20% per night.

Post has been editedsnekt @ - 13.05.16, 00:36

Reason for editing: spoiler

[Shaggyboggart]

kotvot
HM interesting. everyone wanted to roll it. but I thought that would not go.
Sims okay, but what emei, on command * # 06 #?
and what about memory? The RAM is clear 512, but how is the ROM displayed in the settings? there on teclast 4gb.

Post has been editedxxxsadistxxx - 24.02.16, 12:37

[kotvot]

[email protected], 16:26

Sims okay, but what emei, on command * # 06 #?
and what about memory? How is it displayed in the settings? there on teclast 4gb.

Imei is, in the settings about the phone in the general information is also visible, as in the native firmware, the memory is a photo at the top. Under the installation of programs 2 gig.

[email protected], 16:46

But I still can not imagine how to return the RAM.

On my live 512, and on yours I think the RAM will be determined automatically, it will be a live gig and he will see a gig, there was a precedent, a handyman on his tablet for the place of the old at 512 soldered gig and earned without problems.


Post has been editedkotvot - 24.02.16, 12:43

[aleks_4570]

Good afternoon, would anyone have a link working on the February firmware for 7.7?
and then with ddixlab 404 error gives

Post has been editedaleks_4570 - 25.02.16, 11:05

[Shaggyboggart]

TEST v2
Teclast x70 firmware for Plane 7.8 (512 RAM)
Trying to fix the camera. Removed a couple of applications.
Yandex

Uploaded

Post has been editedxxxsadistxxx - 25.02.16, 11:54

[kotvot]

[email protected], 15:33

Trying to fix the camera. Removed a couple of applications.

Signed up, started, the camera gives an error. It can try to start the camera from the front, Skype will be that bread.

Post has been editedkotvot - 25.02.16, 12:43