[X]Assistant

[Alex-stroev]

Meizu PRO 5 - unofficial firmware
Meizu MX5 PRO
Description | Discussion пїЅ | Purchase пїЅ | Accessories пїЅ | Music Meizu PRO 5 пїЅ | Marriage and Repair пїЅ | Meizu Club пїЅ | Games and Applications for Meizu devices пїЅ | Modifications and decorations пїЅ | Power consumption and autonomy пїЅ | Flyme account пїЅ | Meizu Pro 5 Ubuntu | Official firmware пїЅ | Unofficial firmwareпїЅ

Important information!

You can change the ID (identifier) ​​on any version of the device.
Unlocking the bootloader on the Chinese version of the phone is possible only after changing the ID (identifier).
You can unlock the bootloader on any version of the device.
After changing the ID (identifier), SN (serial number) does not change.
After changing the ID (identifier), you can install any firmware.
Everything you do, you do at your own peril and risk. No one is responsible for your actions.
When installing official firmware through custom recovery, you will get a brick

Drivers and Utilities

Drivers are integrated into the firmware. They are installed either automatically when the phone is connected to the Computer using a cable (on the OS a la Windows 8.1), or using the Built-in CD-ROM option, which is called from the list of connections in the blind of the notification panel.
Do not forget that USB debugging should be enabled. You can enable in the settings menu / specials. features / for developers.

Installing drivers if ADB does not work

Installing adb and fastboot on unix systems (using ubuntu as an example)

sudo add-apt-repository ppa: nilarimogard / webupd8
sudo apt-get install python-software-properties
sudo apt-get update
sudo apt-get install android-tools-adb android-tools-fastboot

ADB and FASTBOOT for Windows

platform-tools_windows.zip(536.29 KB)

Driver selectionhere.

Unofficial firmware

ResurrectionRemix v5.8.3 UNOFFICIAL (7.1.2)
crDroid v.1.9 UNOFFICIALL (7.1.1) | mirror

Kernels and Recovery

Custom kernel Ultimate Kernel
TWRP 3.0(if you are going to install official firmware via custom recovery, do not forget to replace the bootloader with the one that is not blocked and the recovery with this one in update.zip)

Instructions

To install custom on stock Chinese with root and changed id
SuperSU-v2.79 working root for Android 7.x based firmware

How to roll back from custom to stock
Installation Instructions CyanogenMod
Flashing with bootlup
Unlocking the bootloader on Meizu PRO5 (if you have a Chinese then use the change of the identifier first, then unlock)
Changing the indexer on the Chinese version
return from custom to stock video instruction

miscellanea

Multi rom
В®FlymeLocalizationPro - crackme Flyme OS
Installing Xposed on Flyme OS 5HereandHereand remarkhere
Firmware with data cleaning(with the possibility of their recovery).
Meizu Pro 5 Backup Tool by st0rm77

There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedsnekt - 08.01.18, 20:05

Reason for editing: SuperSU-v2.79 for Android 7.x firmware

[mcaserg]

Well, let's open, perhaps, the era of custom kernels for Pro5.
You can flash the kernel only with an unlocked bootloader!Flashing like any firmware native conductor

Meizu Pro 5
Ultimate_Kernel
ONLY FOR FLYME !!!

Speklist

-Collected on Linaro 4.9.3SaberMod GCC 5.3Uber GCC 5.3 Graphite
-patched to Linux 3.10.98
-Built in AutoRoot- after the kernel firmware, the root will appear without any flight account, you can simply download SuperSu from the market and update the binary if necessary
-SeLinux Permissive- protection removed
-Builtfull support for synapse(it must be installed from the market) to manage all the parameters of the kernel.To configure the kernel, use only Synapse and no other prog!
-Built-in busybox for synapse operation
-Ability to overclock / downlinkCPU and GPU Freq Control
-The frequencies of the small cluster A53 can be adjusted from 200 to 1800 MHz
-Frequency of a large clusterA57 - from 500 to 2400 MHz
-GPU frequencies - from 266 to 852 MHz
-Full control of all possible voltage adjustments -CPU / GPU / HMP / Memory / ISP / InternalBus Voltage Control
-Full port for missing drivers and settings from the source from Note5 - Dm_CPU_Hotplug, Exynos-mp-cpufreq, Touch_Boost driver and more heaps that are missing in the clumsy meizushnyh sources.
-Ktoonservative CPU governor, Interactive MultiMod CPU governor from Not 5 with profiles
-CPU / GPU / MIF / ISP Thermal Control
-HMP Control and the ability to disable A57 cluster cores
-Full GPU Management
-IO Control, FSync On / Off
-Memory Control
-Network Control
-Crontab Service, Fstrim Control
-Init.d
-Target TTL (to distribute an Internet on Yota)

Sources : https://github.com/ale...UK-PRO5/commits/master

UPD. 07/16/2016 Meizu Pro 5
Ultimate_Kernel_v.17
-SaberMod GCC 7.0
- completely reconfigured TouchBoost driver, for even better smoothness and less consumption
- reduced frequencies used while listening to music
-Other changes on Github:https://github.com/ale...UK-PRO5/commits/master
Two versions of the core - standard (for balanced consumption / speed) and productive (for test lovers) - I highly recommend using this version AFTER tests to unload these tests from memory - otherwise the frequencies will stick at maximum values ​​until the benchmarks are unloaded - This is a feature of the cheat module in the flash firmware, to fully apply to any stock core.
update-Ultimate_Kernel_Pro5_v.17_Stock.zip(11.52 MB)

update-Ultimate_Kernel_Pro5_v.17_Perf.zip(11.52 MB)

Past kernel versions

UPD. 04/30/2016 Meizu Pro 5
Ultimate_Kernel_v.15
-the changes are displayed on the githaba, over the past month they have accumulated too much to describe here. These are mainly multiple fixes of all found source bugs and reconfiguring many parameters for better balance.
Two versions of the core - standard (for balanced consumption / speed) and productive (for test lovers) - I highly recommend using this version AFTER tests to unload these tests from memory - otherwise the frequencies will stick at maximum values ​​until the benchmarks are unloaded - This is a feature of the cheat module in the flash firmware, to fully apply to any stock core.
update-Ultimate_Kernel_Pro5_v.15_Stock.zip(12.48 MB)

update-Ultimate_Kernel_Pro5_v.15_Performance.zip(12.48 MB)



UPD. 03/23/2016 Meizu Pro 5
Ultimate_Kernel_v.14
-I ported (based on the source code of mexu mx4pro) to our device the missing part of the code cut by the Chinese from our sources.
-now full-time power management works- from the standard settings all modes work - Battery, Balanced, Performance. The kernels are now turned off in idle mode, depending on the selected mode, the frequency and settings of the governor also automatically change, without picking at the synapse.
-updated interactive governor
-all bugs and reboots fixed
-The newest touch-driver with just amazing smoothness - January_booster.
series of Nvidia patches to improve efficiency
GPU drivers and settings updated based on S7 sources
- many kernel parameters are also rebalanced based on S7 sources
- remade ramdisk and part of synapse settings
- dozens of patches and fixes
- well, and a lot of accompanying trifles, which has already been forgotten (all on github)

The kernel is laid out in two versions (functionally absolutely identical):

- coreONLY for version 5.6.3.1G beta(where gpu firewood is changed)- on other versions of firmware will not load! update-Ultimate_Kernel_Pro5_v.14_NEW.zip(9.98 MB)

- core for all other (including Chinese) firmwareupdate-Ultimate_Kernel_Pro5_v.14.zip(9.98 MB)



UPD. 03/07/2106 Meizu Pro 5
Ultimate_Kernel_v.12
-Collected on UBER GCC 5.3.1 from 03/03/16 with new optimizations
-fixed all stability issues
- improved smoothness and speed of the system response, performance
-improved efficiency
-added governors Impulse, Conservative, ConservativeX, Intelliactive, Alucard, Interextrem, Zzzmoove, Lionheart
-added schedulers SIO, SIOPLUS, TRIPNDROID, VR, ZEN
- unstable patches are rolled out
- many fixes
update-Ultimate_Kernel_Pro5_v.12.zip(10.03 MB)



UPD. 02/29/2106 Meizu Pro 5
Ultimate_Kernel_v.11
-Collected to the freshestSaberMod GCC 5.3from 02.22.16
-Graphite and -Ofast optimization
-patched to Linux 3.10.98 (3.10.61 -> 3.10.98) - Rolled back due to many bugs
- a lot of tweaks and kernel and ramdisk optimizations
- cleaned up a bunch of garbage in the kernel code
- tweaked GPU drivers
- multiple updates of the Interactive Governor
-dm_cpu_hotplug and exynos-mp-cpufreq updates from Android 6.0 source for notes5
updates android / binder, to improve the smoothness and response
update-Ultimate_Kernel_Pro5_v.11.zip(9.95 MB)



UPD. 02.28.2106 Meizu Pro 5
Ultimate_Kernel_v.10 - removed due to instability!


UPD. 02.23.2106 Meizu Pro 5
Ultimate_Kernel_v.9
- almost a hundred patches from the Hom5 source code (including the marshmallow source code) for all kernel partitions, for fixing the jambs of meyzushnyh sources and system optimization
-mm: per-thread vma cachinghttps://github.com/UpI…80cb95debd738f6a5442e2
- fully updated kernel / sched section
-Fully updated Interactive Governor
-new optimizations to improve the smoothness / response of the system, improve consumption
-new USB drivers and its strapping, fixed kernel config to enable disabled features
-it seems that the problem with the dialer, which collapses and vibrates during a call, has been fixed - I need your help in testing
- ramdisk improved
-In the script for installing the kernel, auto-removal of the synapse and its settings from the previous kernels is added, in order to avoid errors
- heap of fixes and fixes for found bugs
update-Ultimate_Kernel_Pro5_v.9.zip(11.44 MB)



UPD. 13.02.2106 Meizu Pro 5
Ultimate_Kernel_v.8.2
- tons of garbage, tails from the cut out code are cleaned, a bunch of debuggers and engineering auto testers are disabled, which slow down the loading and operation of the system as a whole
-significantly accelerated (compared to previous versions) kernel load
-significantly increased system responsiveness and smoothness / responsiveness of the interface
-redesigned a bunch of drivers and parts of the kernel, replaced by the full source of the source Note5
-added full ExFat support added (port from Not 5)
-redesigned and migrated touch-driver (from the source of Android 6.0 from Not 5)
-added Power Aware Schedulling and HMP Little Packing - off by default. This is for fans of fine-tuning the kernel for themselves, to improve autonomy through a slight loss of performance.
-the thermal driver has been reworked, the Thermal section in the synapse has been reworked, the IPA Control temp setting has been added
-Fsync On / Off replaced by Dynamic Fsync
-added Powersuspend 1.7 Driver
-Added ArchPower and Gentle Fair Sleepers settings
- tweaked and ramdisk
-kucha and heaps of fixes and tweaks, thanks to the Chinese for their curved sources
update-Ultimate_Kernel_Pro5_v.8.2.zip(11.46 MB)



UPD. 02/09/2106 Meizu Pro 5
Ultimate_Kernel_v.7.2
- dozens of patches for importing updates from fresh source code Note5 into our source code
-a lot of fixes, tweaks and improvements of the jambs of the Chinese source
- Devfreq driver section for managing all bus and memory frequencies, completely taken from Note5
-processed GPU drivers
- expanded the possibility of overclocking the GPU to 852 MHz
- The possibility of overclocking a large A57 CPU cluster up to 2400 MHz has been expanded
-increased temperature thresholds for thermal driver operation
Ktoonservative chief executive removed completely due to instability, along with his synapse profiles
- multiple file system patches and tweaks
-added schedulers ROW, FIOPS, BFQ, tweaks default CFQ
fixes and tweaks ramdisk
update-Ultimate_Kernel_Pro5_v.7.2.zip(11.31 MB)

P.S. some screenshots on the 7.2 kernel at max. performance -Governor Performance was used, CPU was overclocked to 2300 MHz, GPU up to 852, FsyncOff (gives a huge increase in Antutu :-))

Maximum performance screenshots

02/07/2016 Meizu Pro 5
Ultimate_Kernel_v.5 - Pilot Version
update-Ultimate_Kernel_Pro5_v.5.zip(11.31 MB)

IMPORTANT!
I recommend after loading, after a couple of minutes, go into the "standard firmware settings / power management / power mode" and change the selected mode back / forth. This is necessary in order for the system to correctly set the Interactive default governor settings for a specific power mode. Sometimes the settings on a large cluster are incorrectly set (this happens on the sink core) - the fact is that the interactive settings of the governor are not in the kernel, but in the firmware, in the file /system/etc/perf-threshold-adjust-config.xml. There, under each diet regime has its own configuration of the governor.

P.P.S - from the found bugs that do not affect the performance and functionality - after the firmware, the serial number of the phone is not determined, writes Unkown. After flashing back the stock kernel, the serial also appears back - TESTED

Post has been editedmcaserg - 09.07.17, 08:35

[tty7]

[email protected], 18:13

Well, let's open, perhaps, the era of custom kernels for Pro5.

Hmm .. can the kernel firmware take down the S \ N? Now in the field the serial number is unknown.

I try to put stock.

Post has been editedtty7 - 07.02.16, 18:42

[Extrim]

FreeMaan,this is the core ...

[mcaserg]

tty7Yes, the serial number for a custom kernel is for some reason not determined, probably due to disabling protection or simply because of the curvature of the sources. When the stock kernel returns, the serial reappears :-)
I do not know, really, why you need it so much.

[Alex-stroev]

[email protected], 18:13

Well, let's open, perhaps, the era of custom kernels for Pro5.

Already put adb on Ubuntu and flashing the kernel.

Post has been editedAlex-stroev - 07.02.16, 23:47

[mcaserg]

Alex-stroev,Tomorrow there will be an update of the kernel, I have been patching the source code the freshest from Hom5 all day, because Meyzushnyh sources - based on the oldest, very first last year's source for the Galaxy S6, I'm just afigo. As a result, we managed to improve performance, especially memory bandwidth, and at the same time, slightly reduce consumption. Now I’m struggling with GPU drivers to raise its performance, too. Meyzushniki something very namudili, a direct port of the freshest firewood from Android 6.0 from notes5 (already 2 generations fresher than that of the maize) until it starts for an unknown reason.

Post has been editedmcaserg - 08.02.16, 00:01

[mcaserg]

Alex-stroev,I have already done all this, what you have listed, in the description it is written :-). In the archive with the core just implanted and the desired loader, so as not to fly unlock. In addition, after the first time I unlocked the bootloader and it stopped checking the signatures of the archives being flashed, it is now easy to sew any other, incl. And the official, firmware, without losing the unlock, it is enough in the archive with the downloaded firmware to replace the bootloader with the correct one. That's how I flashed the official 5.1.3G, and did not lose the unlock.

[genomal]

yeah, interesting moves with the custom started) you can just wait and put an updated version, you will definitely have to set the phone’s running time, 5.1.2g stands on which notifications (despite my actions performed according to the instructions), by the way, Already put "02/07/2016 Pro 5 Ultimate_Kernel_v.5", how are things going with this? plus the question, the function of the automatic switching of the operating mode of the amp is not lost?

Post has been editedgenomal - 08.02.16, 13:16

[egor1303]

Alex-stroev,
What did you notice when changing the core?

[lumixxxxx]

Alex-stroev,Is it possible to realize the color schemes of the display as on the Samsung. like bright. film contrast not just temperature change as it is available now

[mcaserg]

lumixxxxx,While this is not possible, we have the Samsung S6E3FA3 screen, it is impossible to find an MDNIE color table with profiles on it, Samsung doesn’t give them, therefore, apart from Samsung itself, none of the manufacturers using amoled matrix have such profiles, this is its competitive advantage.

[mcaserg]

I updated the kernel, added screenshots of maximum performance:
Meizu PRO 5 - Unofficial firmware

Post has been editedolegusss - 10.02.16, 17:10

[FaTaLiTy3110]

And will it even be possible to unlock the boot on A versions?

[nikk3d]

FaTaLiTy3110,
You can write in maze, whether there will be an unlock. I wrote to them that I knew about all the risks associated with the security of the device and my data, and in which case I would not have any complaints, and I received a response - we cannot allow users to unlock the bootloader. I wrote from a different name and soap, pointing to examples of other vendors about the possibility of unblocking. Answer- We do not have such information .. In response, you work in a maze and do not know what your company is doing, why you have blocked it. No answer. Something like this. And unlocking on the globalka is a leak, I think. On A version it is worth waiting for the same. While someone from the testers will not merge

Post has been editednikk3d - 10.02.16, 00:02

[lumixxxxx]

Anyone able to write a script to unlock the bootloader as by analogy with m2 miniMeizu M2 Mini - Official firmware (Flyme OS Android 5.1) (Post _agent_007_ # 45225733)

[Alex-stroev]

deniska80the core is sawn. The last test is very good.
Damn laid out after all the firmware so that the unlock did not fly off, they did not throw it into the cap.
Now I will do it with the official kernel, the flashing unlock and edit the build.prop for Russia. Custom kernel is better to put those who want.
It's okay to do the firmware yet. And even though there will be a ready-made firmware for rolling back from the test without losing the unlock.

Post has been editedAlex-stroev - 10.02.16, 14:38

[deniska80]

Alex-stroev @ 02/10/2016, 2:29 PM

Deniska80, The core is sawn. The last test is very good.
Damn laid out after all the firmware so that the unlock did not fly off, they did not throw it into the cap.
Now I will do it with the official kernel, the flashing unlock and edit the build.prop for Russia. Custom kernel is better to put those who want.
It's okay to do the firmware yet. And even though there will be a ready-made firmware for rolling back from the test without losing the unlock.

Once again, I upgraded to a custom kernel ... At first, the first 2 minutes everything was ok. Then he put it in his pocket and took out in half an hour - the sensor, unlocking, screen attenuation - does not work very well.

Perhaps with a wipe and full cleaning it would be OK. But I don’t want to lose all the settings and applications without confidence as a result.
I will try to roll a test firmware over a stable without a kernel firmware and look at the work. Maybe it's in the beta firmware.

Not. The firmware itself 5.6 does not issue such glitches.

Post has been editeddeniska80 - 10.02.16, 15:29

[mcaserg]

deniska80long unlocking and understorying is already fixed, it was also possible to significantly increase the response speed of the system as a whole and to improve the smoothness when scrolling. Everything will be in the next version.

[Oleg Mikhalych]

M

We move to subsectionпїЅ Meizu пїЅ.

[Tiberium-QWERTY]

If there are any minuses from unlocking the boot ... it would be worth throwing them into the cap