Assistant
REPLY |
Huawei e5577 LTE BeeLine - Discussion |
Message#1 09.02.17, 16:11 | |
Wiedźmin [offline] Group: Curators Messages 10009 Check in: 04.09.13 Xiaomi Redmi Note 3 Pro Prime Reputation: 3397 | Huawei E5577 - Discussion
Description: 4G / Wi-Fi router Wi-Fi standard: 802.11n Max. speed: 300 Mbps Specifications: Communication generation: 2G, 3G, 4G (LTE) Transmission technology: GPRS (up to 80 Kbps) EDGE (up to 240 Kbps) W-CDMA (up to 2 Mbps) HSUPA (up to 5.7 Mbps) HSDPA (up to 14.4 Mbps) HSPA + (70 Mbps) LTE (up to 173 Mbit / s) Operator (provider): Beeline MTC Megaphone Iota Kyivstar lifecell Vodafone ThreeMob Functions / Features: Connector for external antenna / 2 pcs / Memory card slot SIM card slot Display / 1.45 '' / Wi-Fi router: Wi-Fi connection speed: up to 11 Mbps (802.11b) up to 54 Mbps (802.11g) up to 300 Mbps (802.11n) Range: 10 m Number of connectable devices: 10 Battery Capacity: 1500 mAh General: Connection and connectors: microUSB Wi-Fi Power supply: from battery Dimensions: 96.8x58x17.3 mm Weight: 110 g Useful links: There is no curator in the subject. For questions about filling caps, please contactalex @ ryain QMS or moderators section through a buttonunder the messages. How to do it right, what would you understand the first time, well describedhere. Post has been editedRamsteiner - 08.03.19, 18:05 Reason for editing: everything you need for firmware |
Message#2 09.02.16, 17:32 | |
Visitor [offline] Group: Active users Messages 19 Check in: 08.06.13 Reputation: 0 | Good afternoon, dear participants. I have a Huawei LTE-WiFI modem. Model e5577. Strange, but on the Huawei website there is no such model. On the front part is the Bolt logo! 4G on the sim card MTS works fine. On the BeeLine sim card - only 3G (on a regular 4G phone with the same sim card). Is it possible to see 4G on BeeLine sim cards on e5577? |
Message#3 09.02.16, 18:39 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 7839 Check in: 02.12.08 Reputation: 1082 | In order to answer this question, it is necessary, first of all, to know the modification of the device. That is, for example, E5577s-32 . The modification determines the hardware version of the device - including the set of supported ranges. If it is not marked on the body, then try to see it in the face (web interface). If it is not there, you will have to access the COM ports and watch with the help of the AT command. The second thing you need to know to answer is the region in which you are testing the device. The range of ranges in which LTE networks of different operators operate depends on the region. I can try to guess: in your region, MTS works in the B7 and B3 bands, and Beeline - in B7 and B20. And this modification of the router does not support B7 and B20, but supports B3. Another option when it comes to Moscow: the router does not support the FDD bands at all, but supports the B38. A network in B38 is only at MTS in some areas of the city. |
Message#4 09.02.16, 20:32 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1815 Check in: 04.10.13 Reputation: 492 | Let's start with the fact that you do not have a modem but a router http: //www.4gltemall.c...mobile-hotspot-review/ Post has been editedBichell - 09.02.16, 20:44 |
Message#5 13.02.16, 15:03 | |
Visitor [offline] Group: Active users Messages 19 Check in: 08.06.13 Reputation: 0 | vvevvevve,thanks for your reply. [email protected], 18:39 In order to answer this question, it is necessary, first of all, to know the modification of the device. Under the battery is written e5577. If you look through the WEB, then this is indicated in the system information. Device name: E5577 Hardware version: CL3E5573SM06 [email protected], 18:39 The second thing you need to know to answer is the region in which you are testing the device. I'm testing in Moscow. How to find out which ranges the device supports? Searched the Internet. This is indicated: LTE FDD: 800/900/1800/2100 / 2600MHz LTE TDD: 2300 (2600) MHz HSPA + / UMTS / HSPA: 900/1900 / 2100MHz EGPRS / GSM: 850/900/1800 / 1900MHz LTE FDD DL / UL: 105/50 Mbps LTE TDD Dl / UL: 112/10 Mbps Posted on 02/13/2016 at 15:03: Bichellthanks for your reply. How can I use your information to solve my problem? The fact that this is not a modem, but a router is fundamentally in this case? |
Message#6 13.02.16, 15:48 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1815 Check in: 04.10.13 Reputation: 492 | Do not look in the Internet ask about this from the router itself AT ^ SYSCFGEX =? The difference between a modem router is obvious Router - can distribute Inet, for example, according to Wi Fi The modem can not distribute Wi Fi Do not hesitate to ask modem with addiction AT ^ FHVER ATI AT ^ DLOADINFO? AT ^ SETPORT? AT ^ SETPORT =? AT ^ NVRDEX = 50071,0,8 AT ^ VERSION? AT ^ SYSCFGEX? AT ^ LTECAT? AT ^ NVRDEX = 50071,0,8 AT ^ NVRDEX = 50091,0,60 AT ^ NVRDEX = 50502,0,128 AT ^ NVRDEX = 50503,0,128 Post has been editedBichell - 13.02.16, 15:54 |
Message#7 13.02.16, 22:35 | |
Visitor [offline] Group: Active users Messages 19 Check in: 08.06.13 Reputation: 0 | |
Message#8 14.02.16, 00:03 | |
Visitor [offline] Group: Active users Messages 19 Check in: 08.06.13 Reputation: 0 | |
Message#9 14.02.16, 10:03 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1815 Check in: 04.10.13 Reputation: 492 | and how to execute AT commands on it? When connected via USB, only a new network card appears. The modem and com port do not appear. Huawei E3372s and E3372h (MTS 827F, 829F, Megaphone M150-2, Beeline E3372 / E3370) - Discussion (Bichell # 39036298) |
Message#10 14.02.16, 12:52 | |
Visitor [offline] Group: Active users Messages 19 Check in: 08.06.13 Reputation: 0 | BichellThanks for participating. Of course, I already saw the instructions. As I wrote earlier, the COM port does not appear after launching dc-unlocker. The dc-unlocker does not find the device in the auto-detect mode, and if you specify e5577 (untested) with your hands, you need to specify the port on which the device hangs. And there is no port. There is a device that needs HUAWEI_MOBILE drivers. OS Win7x64 |
Message#11 14.02.16, 22:16 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1815 Check in: 04.10.13 Reputation: 492 | [email protected], 12:52 There is a device that needs drivers HUAWEI_MOBILE http: //savagemessiahzine.com/forum/d..r_5.05.01.00_Setup.exe http: //savagemessiahzine.com/forum/d...erial_Driver_Setup.rar Remove this device from the Windows remote control (with a yellow icon) disconnect the router from the computer by wire Install driver Pick up the router to the computer on the wire Must see everything Post has been editedBichell - 14.02.16, 22:18 |
Message#12 14.02.16, 23:58 | |
Visitor [offline] Group: Active users Messages 19 Check in: 08.06.13 Reputation: 0 | Bichellthank. With these drivers, the router was connected under Win7 (under Win10 not). The teams you offer are not working out everything. Put the result here. Perhaps there is some useful information. =================================================================== DC - Unlocker 2 Client 1.00.1266 Detecting modem: selection: manufacturer - Huawei modems model - Huawei E5577 (untested) Selected Applications port COM18 Found modem: E5577Cs-603 Model: Huawei E5577 (untested) IMEI: --- probably do not need the entire Internet --- Serial NR. : 2XDFG15608019688 Firmware: 21.200.07.06.1151 Dashboard version: WEBUI_17.100.07.08.1151_MRE5 Web UI version: WEBUI_17.100.07.08.1151_MRE5 SIM Lock status: unlocked Wrong codes entered: 0 (unlock attempts left: 10) For unlock, may require firmware change, check tutorial or contact support =================================================================== AT ^ SYSCFGEX =? ERROR AT ^ FHVER ERROR ATI Manufacturer: huawei Model: E5577Cs-603 Revision: 21.200.07.06.1151 IMEI: --- probably do not need the entire Internet --- + GCAP: + CGSM, + DS, + ES Ok AT ^ DLOADINFO? swver: 06.21.07.06.1151 isover: WEBUI_17.100.07.08.1151_MRE5 webuiver: WEBUI_17.100.07.08.1151_MRE5 product name: E5577Cs-603 dload type: 0 Ok AT ^ SETPORT? ERROR AT ^ SETPORT =? ERROR AT ^ NVRDEX = 50071,0,8 ERROR AT ^ VERSION? ^ VERSION: BDT: Oct 12 2015, 09:52:35 ^ VERSION: EXTS: 21.200.07.06.1151 ^ VERSION: INTS: ^ VERSION: EXTD: WEBUI_17.100.07.08.1151_MRE5 ^ VERSION: INTD: ^ VERSION: EXTH: CL3E5573SM06 Ver.A ^ VERSION: INTH: ^ VERSION: EXTU: E5577Cs-603 ^ VERSION: INTU: ^ VERSION: CFG: 1005 ^ VERSION: PRL: ^ VERSION: OEM: ^ VERSION: INI: E5577CsCUST-B00C1151 Ok AT ^ SYSCFGEX? ERROR AT ^ LTECAT? ERROR AT ^ LTECAT = ? ERROR AT ^ LTECAT =? ERROR AT ^ NVRDEX = 50071,0,8 ERROR AT ^ NVRDEX = 50091,0,60 ERROR AT ^ NVRDEX = 50502,0,128 ERROR AT ^ NVRDEX = 50502,0,128 ERROR Post has been editedKVit1974 - 14.02.16, 23:58 |
Message#13 15.02.16, 00:13 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 7839 Check in: 02.12.08 Reputation: 1082 | [email protected], 00:03 clarified the device model e5577cs-603 This modification supports only 2 LTE bands - B3 and B40. And one UMTS range is B1. In general, not the best option for Russia, although it could be much worse. B40 is useless for now, unless you live in Chechnya. And Rostelecom (more precisely, now Tele2) has a decent band in this range, in many regions. Whether they will ever use it is still unknown. |
Message#14 15.02.16, 00:25 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1815 Check in: 04.10.13 Reputation: 492 | [email protected], 23:58 The teams you offer are not working out everything. Try to calculate the unlock code based on your own with this calculator Huawei E3372s and E3372h (MTS 827F, 829F, Megaphone M150-2, Beeline E3372 / E3370) - Discussion (Post forth32 # 35773253) And then try the command at ^ datalock = "code" find out which code (V201, V2 or V1) will answer ok If at ^ datalock = "code" answers OK then try again to execute those AT commands to which Error previously answered. And also - what is the IP address of your router's WebMord? 192.168.8.1 or 192.168.1.1 or 192.168.0.1 or on some other Post has been editedBichell - 15.02.16, 00:28 |
Message#15 15.02.16, 00:27 | |
Visitor [offline] Group: Active users Messages 19 Check in: 08.06.13 Reputation: 0 | |
Message#16 15.02.16, 00:35 | |
Visitor [offline] Group: Active users Messages 19 Check in: 08.06.13 Reputation: 0 | |
Message#17 15.02.16, 00:45 | |
Visitor [offline] Group: Active users Messages 19 Check in: 08.06.13 Reputation: 0 | vvevvevve, here is a table with ranges in different countries of Europe. https: //en.wikipedia.o...LTE_networks_in_Europe Looks like channel 3 is everywhere. Strange router. Made for Europe? |
Message#18 15.02.16, 00:46 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1815 Check in: 04.10.13 Reputation: 492 | team at ^ datalock = "code" It is used not to unlock the router - but to unlock some AT commands blocked Download those here this script Huawei E3272 (Megaphone M100-4, MTS 824F, 824FT) - Discussion (Post by rust3028 # 35130259) Unzip sw_mode_E327x_new.rar and run the script named sw_debug_mode.cmd and look in the Winds do ports open or not 6 pieces with names FC - .... Post has been editedBichell - 15.02.16, 00:47 |
Message#19 17.02.16, 10:36 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 7839 Check in: 02.12.08 Reputation: 1082 | |
Message#20 17.02.16, 11:27 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1815 Check in: 04.10.13 Reputation: 492 | [email protected], 10:36 What do you propose to do? Yes, I do not want anything - he just lost interest in his topic Until he finds the code for the datalink team, there's nothing to discuss Almost all AT teams are locked Access to the Linux console without it does not get And all the rest is empty talk |
Message#21 19.02.16, 00:36 | |
Visitor [offline] Group: Active users Messages 19 Check in: 08.06.13 Reputation: 0 | BichellSorry for not answering for a long time - I was busy. Fulfilled your recommendations. The script fulfills with an error. <? xml version = "1.0" encoding = "UTF-8"?> <error> <code>125002</ code> <message></ message> </ error> To continue, press any key. . . No ports. They are when I launch dc-unlocker: FC - Application Interface FC - PC UI Interface Post has been editedKVit1974 - 19.02.16, 00:37 |
mobile version | Now: 04.29.19, 05:44 |