40 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> Huawei e5577 LTE BeeLine - Discussion
alex @ rya
Message#1
09.02.17, 16:11
Wiedźmin
*********
[offline]

Group: Curators
Messages 10009
Check in: 04.09.13
Xiaomi Redmi Note 3 Pro Prime

Reputation:-  3397  +

Huawei E5577 - Discussion


A photo:
Attached Image
Attached Image

Description:
4G / Wi-Fi router
Wi-Fi standard: 802.11n
Max. speed: 300 Mbps
Specifications:
Communication generation:
2G, 3G, 4G (LTE)
Transmission technology:
GPRS (up to 80 Kbps)
EDGE (up to 240 Kbps)
W-CDMA (up to 2 Mbps)
HSUPA (up to 5.7 Mbps)
HSDPA (up to 14.4 Mbps)
HSPA + (70 Mbps)
LTE (up to 173 Mbit / s)

Operator (provider):
Beeline
MTC
Megaphone
Iota
Kyivstar
lifecell
Vodafone
ThreeMob

Functions / Features:
Connector for external antenna / 2 pcs /
Memory card slot
SIM card slot
Display / 1.45 '' /

Wi-Fi router:

Wi-Fi connection speed:
up to 11 Mbps (802.11b)
up to 54 Mbps (802.11g)
up to 300 Mbps (802.11n)
Range: 10 m
Number of connectable devices: 10
Battery Capacity: 1500 mAh


General:

Connection and connectors:
microUSB
Wi-Fi
Power supply: from battery
Dimensions: 96.8x58x17.3 mm
Weight: 110 g

Useful links:


There is no curator in the subject. For questions about filling caps, please contactalex @ ryain QMS or moderators section through a buttonPictureunder the messages. How to do it right, what would you understand the first time, well describedhere.

Post has been editedRamsteiner - 08.03.19, 18:05
Reason for editing: everything you need for firmware
KVit1974
Message#2
09.02.16, 17:32
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 08.06.13

Reputation:-  0  +

Good afternoon, dear participants.
I have a Huawei LTE-WiFI modem.
Model e5577.
Strange, but on the Huawei website there is no such model.
On the front part is the Bolt logo!

4G on the sim card MTS works fine.
On the BeeLine sim card - only 3G (on a regular 4G phone with the same sim card).

Is it possible to see 4G on BeeLine sim cards on e5577?
vvevvevve
Message#3
09.02.16, 18:39
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 7854
Check in: 02.12.08

Reputation:-  1083  +

In order to answer this question, it is necessary, first of all, to know the modification of the device.
That is, for example, E5577s-32 .
The modification determines the hardware version of the device - including the set of supported ranges.
If it is not marked on the body, then try to see it in the face (web interface). If it is not there, you will have to access the COM ports and watch with the help of the AT command.

The second thing you need to know to answer is the region in which you are testing the device. The range of ranges in which LTE networks of different operators operate depends on the region.
I can try to guess: in your region, MTS works in the B7 and B3 bands, and Beeline - in B7 and B20. And this modification of the router does not support B7 and B20, but supports B3.
Another option when it comes to Moscow: the router does not support the FDD bands at all, but supports the B38. A network in B38 is only at MTS in some areas of the city.
Bichell
Message#4
09.02.16, 20:32
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1815
Check in: 04.10.13

Reputation:-  492  +

KVit1974 @ 02.09.2016, 17:32*
I have a Huawei LTE-WiFI modem.
Model e5577.

Let's start with the fact that you do not have a modem but a router
http: //www.4gltemall.c...mobile-hotspot-review/


Post has been editedBichell - 09.02.16, 20:44
KVit1974
Message#5
13.02.16, 15:03
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 08.06.13

Reputation:-  0  +

* vvevvevve,thanks for your reply.

In order to answer this question, it is necessary, first of all, to know the modification of the device.


Under the battery is written e5577.
If you look through the WEB, then this is indicated in the system information.

Device name: E5577
Hardware version: CL3E5573SM06

The second thing you need to know to answer is the region in which you are testing the device.


I'm testing in Moscow.

How to find out which ranges the device supports?
Searched the Internet. This is indicated:

LTE FDD:
800/900/1800/2100 / 2600MHz
LTE TDD:
2300 (2600) MHz
HSPA + / UMTS / HSPA:
900/1900 / 2100MHz
EGPRS / GSM:
850/900/1800 / 1900MHz
LTE FDD DL / UL:
105/50 Mbps
LTE TDD Dl / UL:
112/10 Mbps

Posted on 02/13/2016 at 15:03:

* Bichellthanks for your reply.
How can I use your information to solve my problem?
The fact that this is not a modem, but a router is fundamentally in this case?
Bichell
Message#6
13.02.16, 15:48
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1815
Check in: 04.10.13

Reputation:-  492  +

KVit1974 @ 02.13.2016, 15:03*
How to find out which ranges the device supports?

Do not look in the Internet ask about this from the router itself

AT ^ SYSCFGEX =?

The difference between a modem router is obvious
Router - can distribute Inet, for example, according to Wi Fi
The modem can not distribute Wi Fi

Do not hesitate to ask modem with addiction
AT ^ FHVER
ATI
AT ^ DLOADINFO?
AT ^ SETPORT?
AT ^ SETPORT =?
AT ^ NVRDEX = 50071,0,8
AT ^ VERSION?
AT ^ SYSCFGEX?
AT ^ LTECAT?
AT ^ NVRDEX = 50071,0,8
AT ^ NVRDEX = 50091,0,60
AT ^ NVRDEX = 50502,0,128
AT ^ NVRDEX = 50503,0,128


Post has been editedBichell - 13.02.16, 15:54
KVit1974
Message#7
13.02.16, 22:35
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 08.06.13

Reputation:-  0  +

* Bichelland how to execute AT commands on it? When connected via USB, only a new network card appears. The modem and com port do not appear.
KVit1974
Message#8
14.02.16, 00:03
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 08.06.13

Reputation:-  0  +

* vvevvevve,specified the device model e5577cs-603.
I found out by installing the application on the phone.
Bichell
Message#9
14.02.16, 10:03
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1815
Check in: 04.10.13

Reputation:-  492  +

KVit1974 @ 02.13.2016, 22:35*
and how to execute AT commands on it? When connected via USB, only a new network card appears. The modem and com port do not appear.

Huawei E3372s and E3372h (MTS 827F, 829F, Megaphone M150-2, Beeline E3372 / E3370) - Discussion (Bichell # 39036298)
KVit1974
Message#10
14.02.16, 12:52
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 08.06.13

Reputation:-  0  +

* BichellThanks for participating.
Of course, I already saw the instructions.

As I wrote earlier, the COM port does not appear after launching dc-unlocker. The dc-unlocker does not find the device in the auto-detect mode, and if you specify e5577 (untested) with your hands, you need to specify the port on which the device hangs. And there is no port.
There is a device that needs HUAWEI_MOBILE drivers.
OS Win7x64

Attached Image

Attached Image

Attached Image
Bichell
Message#11
14.02.16, 22:16
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1815
Check in: 04.10.13

Reputation:-  492  +

There is a device that needs drivers HUAWEI_MOBILE

http: //savagemessiahzine.com/forum/d..r_5.05.01.00_Setup.exe

http: //savagemessiahzine.com/forum/d...erial_Driver_Setup.rar

Remove this device from the Windows remote control (with a yellow icon)
disconnect the router from the computer by wire
Install driver
Pick up the router to the computer on the wire
Must see everything

Post has been editedBichell - 14.02.16, 22:18
KVit1974
Message#12
14.02.16, 23:58
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 08.06.13

Reputation:-  0  +

* Bichellthank. With these drivers, the router was connected under Win7 (under Win10 not).

The teams you offer are not working out everything.
Put the result here. Perhaps there is some useful information.

===================================================================

DC - Unlocker 2 Client 1.00.1266

Detecting modem:

selection:
manufacturer - Huawei modems
model - Huawei E5577 (untested)

Selected Applications port COM18

Found modem: E5577Cs-603
Model: Huawei E5577 (untested)
IMEI: --- probably do not need the entire Internet ---
Serial NR. : 2XDFG15608019688
Firmware: 21.200.07.06.1151
Dashboard version: WEBUI_17.100.07.08.1151_MRE5
Web UI version: WEBUI_17.100.07.08.1151_MRE5
SIM Lock status: unlocked
Wrong codes entered: 0 (unlock attempts left: 10)

For unlock, may require firmware change, check tutorial or contact support

===================================================================


AT ^ SYSCFGEX =?


ERROR

AT ^ FHVER

ERROR

ATI

Manufacturer: huawei
Model: E5577Cs-603
Revision: 21.200.07.06.1151
IMEI: --- probably do not need the entire Internet ---
+ GCAP: + CGSM, + DS, + ES
Ok

AT ^ DLOADINFO?

swver: 06.21.07.06.1151
isover: WEBUI_17.100.07.08.1151_MRE5
webuiver: WEBUI_17.100.07.08.1151_MRE5
product name: E5577Cs-603
dload type: 0
Ok

AT ^ SETPORT?

ERROR

AT ^ SETPORT =?

ERROR

AT ^ NVRDEX = 50071,0,8

ERROR

AT ^ VERSION?

^ VERSION: BDT: Oct 12 2015, 09:52:35
^ VERSION: EXTS: 21.200.07.06.1151
^ VERSION: INTS:
^ VERSION: EXTD: WEBUI_17.100.07.08.1151_MRE5
^ VERSION: INTD:
^ VERSION: EXTH: CL3E5573SM06 Ver.A
^ VERSION: INTH:
^ VERSION: EXTU: E5577Cs-603
^ VERSION: INTU:
^ VERSION: CFG: 1005
^ VERSION: PRL:
^ VERSION: OEM:
^ VERSION: INI: E5577CsCUST-B00C1151
Ok

AT ^ SYSCFGEX?


ERROR

AT ^ LTECAT?

ERROR

AT ^ LTECAT =
?
ERROR

AT ^ LTECAT =?

ERROR

AT ^ NVRDEX = 50071,0,8

ERROR

AT ^ NVRDEX = 50091,0,60

ERROR

AT ^ NVRDEX = 50502,0,128

ERROR

AT ^ NVRDEX = 50502,0,128

ERROR



Post has been editedKVit1974 - 14.02.16, 23:58
vvevvevve
Message#13
15.02.16, 00:13
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 7854
Check in: 02.12.08

Reputation:-  1083  +

clarified the device model e5577cs-603

This modification supports only 2 LTE bands - B3 and B40. And one UMTS range is B1.
In general, not the best option for Russia, although it could be much worse.

B40 is useless for now, unless you live in Chechnya. And Rostelecom (more precisely, now Tele2) has a decent band in this range, in many regions. Whether they will ever use it is still unknown.
Bichell
Message#14
15.02.16, 00:25
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1815
Check in: 04.10.13

Reputation:-  492  +

The teams you offer are not working out everything.


Try to calculate the unlock code based on your own with this calculator
Huawei E3372s and E3372h (MTS 827F, 829F, Megaphone M150-2, Beeline E3372 / E3370) - Discussion (Post forth32 # 35773253)

And then try the command
at ^ datalock = "code"
find out which code (V201, V2 or V1)
will answer ok

If at ^ datalock = "code" answers OK
then try again to execute those AT commands to which Error previously answered.
And also - what is the IP address of your router's WebMord?
192.168.8.1
or
192.168.1.1
or
192.168.0.1
or on some other

Post has been editedBichell - 15.02.16, 00:28
KVit1974
Message#15
15.02.16, 00:27
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 08.06.13

Reputation:-  0  +

* vvevvevve,Thank you very much for your answer.
KVit1974
Message#16
15.02.16, 00:35
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 08.06.13

Reputation:-  0  +

* Bichellbut it is not gilded, as it seemed to me.
SIM Lock status: unlocked

In any case, the at ^ datalock = "code" Error response for all three options.

Posted 02/15/2016, 00:35:

* Bichell 192.168.1.1
KVit1974
Message#17
15.02.16, 00:45
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 08.06.13

Reputation:-  0  +

* vvevvevve,
here is a table with ranges in different countries of Europe.
https: //en.wikipedia.o...LTE_networks_in_Europe

Looks like channel 3 is everywhere.
Strange router.
Made for Europe?
Bichell
Message#18
15.02.16, 00:46
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1815
Check in: 04.10.13

Reputation:-  492  +

KVit1974 @ 02.15.2016, 00:35*
SIM Lock status: unlocked

team
at ^ datalock = "code"
It is used not to unlock the router - but to unlock some AT commands blocked
Download those here this script
Huawei E3272 (Megaphone M100-4, MTS 824F, 824FT) - Discussion (Post by rust3028 # 35130259)
Unzip sw_mode_E327x_new.rar and run the script named
sw_debug_mode.cmd
and look in the Winds do ports open or not
6 pieces with names FC - ....

Post has been editedBichell - 15.02.16, 00:47
vvevvevve
Message#19
17.02.16, 10:36
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 7854
Check in: 02.12.08

Reputation:-  1083  +

Bichell @ 02/15/2016 00:46*
and look in the Winds do ports open or not

And why does he need these ports? What do you propose to do?
Bichell
Message#20
17.02.16, 11:27
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1815
Check in: 04.10.13

Reputation:-  492  +

What do you propose to do?

Yes, I do not want anything - he just lost interest in his topic
Until he finds the code for the datalink team, there's nothing to discuss
Almost all AT teams are locked
Access to the Linux console without it does not get
And all the rest is empty talk
KVit1974
Message#21
19.02.16, 00:36
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 08.06.13

Reputation:-  0  +

* BichellSorry for not answering for a long time - I was busy.

Fulfilled your recommendations.
The script fulfills with an error.

<? xml version = "1.0" encoding = "UTF-8"?>
<error>
<code>125002</ code>
<message></ message>
</ error>
To continue, press any key. . .


No ports. They are when I launch dc-unlocker:
FC - Application Interface
FC - PC UI Interface

Post has been editedKVit1974 - 19.02.16, 00:37
Huawei
 

40 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 04/30/19, 14:25