> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


157 pagesV  < 1 2 3 4 5 6 > »  
 
REPLY
> Lenovo IdeaTab A7600 - Unofficial firmware
iredzumi
Message#1
09.02.16, 05:40
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 5701
Check in: 02.03.14

Reputation:-  1112  +

Lenovo IdeaTab A7600 - Unofficial firmware
PictureA10-70
Description | Discussion » | Official firmware » | Unofficial firmware »

Important information!

Dear users!
You have in your hands a device based on the Chinese Mediatek MT8121 / MT8382 processor. Although LENOVO is a reliable brand,HIGHLY RECOMMENDto makeFULL BACKUPthe entire operating system.
Attention: all actions for flashing and other arbitrary modification of the tablet software you do at your own risk! Only you are responsible for your actions, and if you are not sure about your actions, do not do it!
Drivers and Utilities
Unofficial firmware
Distribution of firmware on the bases and versions of Android
Viper OS v3.1.1 Coral
AIM OS v2.5 A7600-F
FLUENT OS v1.0 Android 7.1.2
Colt OS v1.4 Android 7.1.2

Resurrection Remix 5.8.8 from 08.02.2019 crossported by Schibeki (A7600H / F)
RESURRECTION REMIX-O 5.8.5
RESURRECTION REMIX-N 5.8.4
RESURRECTION REMIX-M 5.7.4 (A7600-H) (A7600-F)
RESURRECTION REMIX-M 5.7.3 (A7600-F)
RESURRECTION REMIX-M 5.7.3
Resurrection Remix 5.7.1
Resurrection Remix V5.7.0for H version
Resurrection Remix V5.6.8
Resurrection remix 5.5.9
ResurrectionR MM 6.0.1 for F-version tablet!

Eelo v0.1 (7.1.2)
DotOS v1.2 (Android 7.1.2)
VIPER OS 3.1.1 (Android 7.1.2)
XENON HD
CrDROID v3.8.4

MOKEE OS 7.1.2
LITE ROM v1.3.0
AOSP EXTENDED
AOKP (Android 7.1.2)
LINEAGE OS14.1
LINEAGE OS13
CM13 STABLE (A7600-H) (A7600-F)build on 10/10/2016
Temasek-MM-CM13-A7600-H
CM13.0.1 (A7600-H)
CM13 (A7600-H)
VANIR AOSP "CM13" (A7600-H)
CyanogenMod 12.1 V6
CyanogenMod 12.1 for Lenovo A7600F
GAPPS for CyanogenMod 12.1 (5.1.x)
CM12.1_from_a7600 + fix and dolby
CYANOGENMOD 12.1 Lenovo A7600H
CyanogenMod 12.1 final (not recommended for installation, due to numerous bad reviews, a brick is possible)
CM-12.1 by rusya77
CM "N OS" V2.1
Dirty Unicorns V10.6 R74
LOLLICRAFT-M ANDROID 6.0.1
XOSPXperia Open Source Project "CM13"(A7600-H)

firmware with voice call # 1
firmware with voice call # 2
firmware with voice call # 3
A7600H A442 029 ROW LITE + A7600HV A442 030 CN LITE
A7600F_A442_000_016_140627_ROW (installation via custom.recovery)
Deodex KitKat firmware based on - A7600H_A442_000_025_141027_ROW (installation via custom.recovery)
Lenovo A7600 H (Android 4.2.2) Lite
Lenovo A7600 H (Android 4.2.2)
Instructions
Installing custom firmware
Preparation for firmware:
Download the desired firmware.
Copy the necessary zip-archives to the memory card: firmware (for example CM12.1) and addition (Google Apps, tweaks ...).
Boot into recovery (how to install the recovery is written inFAQ). When you turn on the tablet, hold down the volume (+) and key (ON). Press simultaneously and hold until recovery appears. Next, select the recovery item and confirm

In the recovery menu:
Select the Backup item (this will allow you to make a full backup of the tablet and save it to a memory card), return to the main menu.
Select the Wipe (factory reset) item, then return to the main menu.
Go to Install and select the firmware from the memory card, go back and install Google Apps in the same way.
After the installation is complete, go back to the TWRP main menu and select the Reboot item.
Instructions for firmware via Flash Tool
ATTENTION: DO NOT CLICK "FORMAT" in the Flash Tool. When formatting, you will lose your IMEI number & MAC address of WIFI.
1. Download and install drivers for firmware.
2. Download the required firmware in the format for the SP Flash Tool and unpack the archive with the folder target_bin. On the way to the firmware should not be Russian Chinese and other non-Latin characters!
3. Download and unpack the program SP Flash Tool. On the way to the program there should not be Russian Chinese and other non-Latin characters!
4. Run Flash_tool.exe, press the Scatter-loading button and select MT65xx_Android_scatter_emmc.txt (xx is 75, 77 or 89 and depends on the processor of your device) from the folder with the firmware
5. Be sure to tick DA DL All With Check Sum (otherwise get a "semi-brick") !!!
6. Check the modes in the Options menu, there should be a check mark in USB Mode and DA Download All
7. Click the Firmware-Upgrade button.
8. Connect the disabled tablet
9. If everything is correct, then the colored status bars will “run through” and a green circle will appear, informing you of the success of the operation.
10. Turn off the tablet, use.
ROOT / Recovery
miscellanea

There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.


Post has been editedderak1129 - 26.02.19, 05:20
Reason for editing: Resurrection Remix 5.8.8 from 08.02.2019 crossported by Schibeki (A7600H / F)
Slava_Apple
Message#22
01.01.16, 02:22
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 171
Check in: 11.01.13
Sony Xperia ZR C5503

Reputation:-  2  +

Tested CM 12.1 from zip117 in AnTuTu, the results are as follows:
Energy consumption "energy saving" - 20296
Power "balanced" - 20559
High Performance Power Consumption 20192
Power Saving Mode - 13319
Tokyo45
Message#23
02.01.16, 00:38
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 79
Check in: 26.10.15
LG K10

Reputation:-  16  +

I think many were waiting for this, I decided to do something pleasant for lovers of high-quality sound from dolby! I spread my port of the very same kind of dolby digital plus, which users of this topic used to see on the screens of their tablets and not only. He goes on any version of the android, even on the whale, if it is torn up, even though it is Lolipop, it works there and there, that is, universal.
And somehow I don’t want to leave the members of the forum without a gift for the New Year) installation through the recovery, any of the custom ones.
Here you go:Attached filedolby.zip(2.75 MB)

Here are the proofs, fresh screenshots, in fresh cyan:
Attached Image
Attached Image

Please add to the cap!

Post has been editedTokyo45 - 10.03.19, 11:17
Reason for editing: in the header
Tokyo45
Message#24
03.01.16, 05:21
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 79
Check in: 26.10.15
LG K10

Reputation:-  16  +

I apologize for the long absence, the mobile Internet, day traffic finished) about hissing, I have no, it seems strongly pronounced, but again I have to watch and experiment. Throw references to the assemblies and the founders of different cyan for 6582, I will try to see which configs are most suitable. For starters, I'll try from the younger brothers a3300 and a5500. And yes, there is no engineering menu.
Corrected the volume of the sound, here's the patch, it should return the sound as in stock. Yes, in principle, this should fix all the problems with sound.
Attached fileaudiofix_from_a7600.zip(174.5 KB)

Attention, after installing the patch, the tablet restarts itself! I wrote such a script, it was too long for me)
Again, please add to the cap!

Post has been editedrinat_s81 - 03.01.16, 08:39
Reason for editing: in the header
Tokyo45
Message#25
03.01.16, 06:32
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 79
Check in: 26.10.15
LG K10

Reputation:-  16  +

While trying to fix the video recording.
Guys! I fixed a video! Here, throw the contents of this archive here along this path: / system / app /
And agree with the replacement. Rights of files and folders:
Rwx-rw-rw for folders: camera2, lib, arm (located in the lib folder)
Rw-r-r only for camera2.apk
Here is proof of the work:
Attached Image
Attached Image
Attached Image
Attached Image

Here you go:
Attached fileCamera.zip(28.04 MB)

Add to the cap pliz.
PS: I think the problems with the cyan are over, and the first screenshots did not come out as we would like, but I think the essence is clear. The video is not really vertical! Screens just like that.

Post has been editedrinat_s81 - 03.01.16, 08:39
Reason for editing: in the header
Tokyo45
Message#26
04.01.16, 12:47
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 79
Check in: 26.10.15
LG K10

Reputation:-  16  +

I apologize for lingering.
Although not colorful and with rhinestones, I spread, in my opinion, the most stable cyan, from bugs only a problem with charging in the off mode and dimness. And these two problems are not yet solved and most likely will not be solved. These are build bugs, there's nothing you can do about it.
Works ..., yes everything works, there is no sense to comb)
Installation Procedure:
We make wipes internal storage, data, system, cashe, dalvike cashe, in short, wipe everything.
Then we put this firmware, and on top of it we put dolby right away, and after dolby, we immediately fix it with sound.
In this case, the tablet itself will reboot! And it is this sequence!
Here is the fix and dolby:
Attached fileaudiofix_from_a7600.zip(174.5 KB)

Attached filedolby.zip(2.75 MB)

And the link to the firmware:
https: //drive.google.c..../view? usp = docslist_api
Try, unsubscribe, if you find more ksyaki, decide. But I will not)
P.S .: set through TWRP 2.8.7.0

Post has been editedrinat_s81 - 04.01.16, 13:04
Reason for editing: in the header
iRusso
Message#27
04.01.16, 15:35
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 379
Check in: 20.06.13
Xiaomi Redmi 4X 3/32

Reputation:-  12  +

I installed the firmware CM 12.1 from zip117. The firmware was launched, after that it installed first through Dolby recovery, and then a patch to the sound. As a result, the stereo works, I personally do not hear the hiss, but according to my subjective feelings, the sound is slightly worse than in the stock firmware. In general, I also have CM 12.1 installed on my smartphone and the sound is also worse there than in the factory firmware. So I think you should not wait in the cyanogen of the same sound as in the stock firmware ... In the future, I will try to install viper4android, maybe with its help the sound will be better.
About the screen - I did not notice the difference at all.
As for the firmware bugs: 1) files from the network are not saved directly to the USB flash drive, SDfix had to be installed, 2) the tablet charge became noticeably slower.
I can't judge for the moment when I use energy.
Once again I want to express my gratitude to the distinguishedzip117andTokio45For the work done: good:

P.S. The patch on the camera has not been established
Attached Image


--------------------
Smartphones: Amoi n828 (MIUI V5) ->Xiaomi Redmi 1S (MIUI 8) ->Xiaomi Redmi 3s (MIUI 8) ->Xiaomi Redmi Note 4X (MIUI 9) (died after 4 months of operation) ->Xiaomi Redmi 4x (miui 10)
Tablet: Lenovo IdeaTab A7600 3G
Tokyo45
Message#28
04.01.16, 18:27
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 79
Check in: 26.10.15
LG K10

Reputation:-  16  +

Recently, I found a joint, in the headphones after my patch, the sound was very loud, I evaporated this case, here is the final patch for the sound.
Here you go:Attached filefinal_audiofix.zip(173.42 KB)
stas g
Message#29
31.01.16, 09:36
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1972
Check in: 19.03.14

Reputation:-  321  +

GAPPS for CyanogenMod 12.1 (5.1.x)


version comparison

Download

Variations of Gapps for Android 5.1.x Lollipop:

Stock
Full
Mini
Micro
Nano
Pico(minimum for Google Play functionality)
Pico (uni)

Pico (Uni) compatible with all DPI variants

Also GAPPS can be downloadedfrom here(always fresh versions)


Post has been editedrinat_s81 - 31.01.16, 10:00
Reason for editing: in the header
stas g
Message#30
05.02.16, 18:02
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1972
Check in: 19.03.14

Reputation:-  321  +

Theme Chooser & Themes Store

Attached Image

Customization of each application separately and the theme store.
More advanced application from CyanogenOS.
C-Apps from Cyanogen were taken. Cut out all unnecessary and idle software.
Installation
We put through TWRP, after making a backup.
Screenshots
Under our permission, the application almost does not fit. Screenshots were taken from another device.

Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

Download:Attached fileThemeChooser.zip(9.79 MB)


Post has been editedrinat_s81 - 05.02.16, 18:22
Reason for editing: in the header
iredzumi
Message#31
10.02.16, 12:11
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 5701
Check in: 02.03.14

Reputation:-  1112  +

valentin101
Message#32
11.02.16, 18:57
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 107
Check in: 09.06.11

Reputation:-  1  +

Perezalete please CyanogenMod 12.1 for the F version and then one link and the one beaten the rest everything is only the H version.
NEron160
Message#33
12.02.16, 23:15
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 161
Check in: 05.11.12
LeEco Le S3 X522

Reputation:-  20  +

Hello! I have a small problem: after installing CM12 on a tablet (H version), I don’t want to catch 3g network only EDGE. I tried in mobiuncle mtk tools to set wcdma only, then Simka just stops catching nets. Is there any solution?


--------------------
Leeco Le S3 X522 (Android 8.1.0) Meizu M3 Note (Android 5.1) Alactel One Touch 4033D (

Android 4.2.2 download

) Irbis TW81 (Windows 10)
iredzumi
Message#34
13.02.16, 07:05
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 5701
Check in: 02.03.14

Reputation:-  1112  +

* NEron160,
Check through the engineering menu, set the frequency, maybe they are disabled by default (well, and apn settings at the same time)

Post has been editedrinat_s81 - 13.02.16, 07:06
stas g
Message#35
13.02.16, 21:47
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1972
Check in: 19.03.14

Reputation:-  321  +

If the VPN does not work

Method from mtkroms
1.InstallPsiphonand choose"Tunnel only browser Psiphon"
2.Open the tab"Logs"and find the string"HTTP proxy running ****"
****- port of proxy server (usually 8080). It will be necessary to enter at the 4th stage.
3.Open the Wi-Fi settings. Long press on the network to which you are connected>>>Change network>>>Advanced settings.
4.Change proxy settings to"Manually".
Proxy host name: 127.0.0.1
Proxy port:****
5.We check the IP address (for example, through 2ip.ru)
After that, the VPN will work not only in the Psiphon browser, but also in Chrome (most likely, in other applications). But after turning off the VPN, I had to restore the network settings, since Chrome cursed the impossibility of connecting to a proxy server, and indeed no application could access the Internet


Post has been editedStanislav Grigoriev - 13.02.16, 21:48
stas g
Message#36
14.02.16, 10:49
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1972
Check in: 19.03.14

Reputation:-  321  +

* rinat_s81
As far as I know, there is no engineering menu with CM
Tokyo45
Message#37
14.02.16, 11:24
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 79
Check in: 26.10.15
LG K10

Reputation:-  16  +

* NEron160,You can change the apn settings, check imei, there is no engineer in cyan, or in extreme cases, reset all data through the recovery and wipe cache. If this does not help, then reshoot. You can still chem in build.prop, but I do not guarantee that after this the tablet will turn on. Make a backup!
Here add these lines to build.prop, it can help:
ro.ril.hsxpa = 2
ro.ril.gprsclass = 10
ro.ril.hep = 1
ro.ril.enable.dtm = 1
ro.ril.hsdpa.category = 10
ro.ril.enable.a53 = 1
ro.ril.enable.3g.prefix = 1
ro.ril.htcmaskw1.bitmask = 4294967295
ro.ril.htcmaskw1 = 14449
ro.ril.hsupa.category = 5

Post has been editedTokyo45 - 14.02.16, 11:31
Koltakov2001
Message#38
15.02.16, 19:17
a guest
*
[offline]

Group: Users
Messages 3
Check in: 20.12.15
Honor 8X JSN-L21

Reputation:-  0  +

rinat_s81 @ 03/02/2015 05:12*
Thanks* serg2327,(for a tip) and* pokvsel(for collected framework-res.apk) (+ you flew away from me, ) it turned out to start the dialer ( no voice call maybe you need to dig somewhere else, but you can check the balance Dialer I pulled from a related lenovo A3500hv), screenshots and the files themselves below
Brief manual

It is NOT recommended to do this on firmware 029, because there is a “rumor” that the method will not work ... requires confirmation ..

1.With the help of the file manager (I usedroot explorer) we copy with the replacement the framework-res.apk file, with the subsequent setting of the rights rw-r-r (to the system / framework folder) - and we say thank you* serg2327, and * pokvsel
framework-res.apk
[Attachment = "5901862: framework-res.apk"]

2. copy the files Dialer.apk and Dialer.odex to the system / priv-app folder with the rights set rw-r-r
Dialer.apk and Dialer.odex
[attachment = "5902422: Dialer.rar"] [attachment = "5902483: 5831252 (1) .jpg"]

3. reboot the tablet
in the end we have
[attachment = "5901839: Screensh ... 11-34-29.png"]
[attachment = "5903384: Screensh ... 18-03-16.png"]
[attachment = "5901840: Screensh ... 10-47-29.png"]
[attachment = "5901842: Screensh ... 10-47-12.png"]

Manipulations were carried out on this firmware.
[attachment = "5903243: Screensh ... 17-44-08.png"]


Method 2

Not requiring root rights, and unnecessary gesturesLenovo IdeaTab A7600 - Official firmware (OS 4.2.2-4.4.2) (Post rinat_s81 # 38975809)

On firmware 029 works by me checked
M
Check outForum Rules:

4.19. Forbidden abuse of quoting (overquoting, overquoting).
It is not necessary to quote fully opponent posts - just select the main points and press the buttonPicture


Post has been editedEnton - 21.02.16, 16:50
iredzumi
Message#39
15.02.16, 19:29
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 5701
Check in: 02.03.14

Reputation:-  1112  +

* Koltakov2001,
On firmware 029 works by me checked

That's great;) just someone in the subject wrote that the method did not work on 029, so I wrote in the post that there is a “rumor”
paul_d
Message#40
16.02.16, 18:27
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 730
Check in: 02.12.09
Samsung Galaxy S7 SM-G930FD

Reputation:-  25  +

Worthringingfirmware # 2 from the cap. I could not find where the widgets of the programs I installed. Any problems with widgets? Where they do have to be? I do a long tap on the screen, a line appears at the bottom, as I understand it, are these widgets? They are very few there, mostly those that came with the firmware and a couple of installed programs. But they should be much more, because I know by phone that these programs have widgets. And here in the tablet, I do not see them.

It was also found that wifi direct does not work. Those. the connection between devices seems to be established, but nothing can be transmitted. For outgoing sending, the Wi-Fi Direct item is missing. And when you receive it, just nothing happens when the sending is done on the other device.

of protestringing firmware # 3 from the cap. In it, widgets work - this is good. But wifi direct behaves the same way as on the previous firmware, i.e. does not work.

At the same time: I already wrote in the theme of official firmware:ringingThe firmware for the first link (which is not # 2) does not work correctly with Bluetooth: it does not accept incoming shipments. So be careful who this matters.

Post has been editedpaul_d - 25.02.16, 20:20
Jusyjay
Message#41
24.02.16, 22:48
a guest
*
[offline]

Group: Users
Messages 6
Check in: 11.11.15

Reputation:-  0  +

Tokyo45 @ 01/04/2016, 11:47*
I apologize for lingering.
Although not colorful and with rhinestones, I spread, in my opinion, the most stable cyan, from bugs only a problem with charging in the off mode and dimness. And these two problems are not yet solved and most likely will not be solved. These are build bugs, there's nothing you can do about it.
Works ..., yes everything works, there is no sense to comb)
Installation Procedure:
We make wipes internal storage, data, system, cashe, dalvike cashe, in short, wipe everything.
Then we put this firmware, and on top of it we put dolby right away, and after dolby, we immediately fix it with sound.
In this case, the tablet itself will reboot! And it is this sequence!
Here is the fix and dolby:
[attachment = "7346637: audiofix ... om_a7600.zip"]
[attachment = "7346638: dolby.zip"]
And the link to the firmware:
https: //drive.google.c..../view? usp = docslist_api
Try, unsubscribe, if you find more ksyaki, decide. But I will not)
P.S .: set through TWRP 2.8.7.0

I put everything in turn, in the settings it showed a native memory of 0.98 gig, I rolled back to the whale, the memory returned to normal, what should I do now? I want 5 android

Post has been editedMannur - 24.02.16, 22:49
Reason for editing: Forum Rules clause 4.19, removed under spoiler
Lenovo
 

157 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 05/19/19, 23:22