Unlocking XIAOMI Loaders | For all XIAOMI smartphones and tablets (MediaTek & Qualcomm)
Good time, unlocked the laptop 5 via Mi Flash, everything went smoothly, I purchased 5+ a couple of days ago, I wanted to unlock the same data for the accounts of the account, but the program issued that you need to wait 30 days to unlock the same ID, Do not speed up the process?
Guys, guys, I will unlock the downloader to change the TTL from 64 to 63 specials. Program, because We need root rights. The loader will then block the device to become safer (well, you never know what, I am not particularly experienced, suddenly the last thousand rubles from Sberbank online somewhere elsewhere virus), after which I will not be able to change the TTL to the same program you need Ruth the rights?)
Aleksban @ 19.08.18, 14:11
Then the loader is blocked
And there will be a brick. You can block only on clean firmware, no change
LK2322 @ 08/18/18, 17:10
Well, you need many accounts. Or wait for 30 days for each device
Where does it make information about that on 1 account you can unlock only 1 device in the calendar month?
I regularly tie a few devices per month for the same account, and always get a meter 360 hours. What 30 days are we talking about?
Received the device, tied, in 15 days unlocked after the meter's expiration of at least 10 devices per month.
Cap @ 01/29/16, 19:47
- How to unlock a new (other) phone after already spent (used) unlock
log in to Mi unlock under the same account for which the request was made, unlock.
It is not necessary to send the unlock request again.
for 1 account ->1 phone per calendar month, i.e. From the 1st of each month you can unlock the next device.
log in to Mi unlock under the same account for which the request was made, unlock.
It is not necessary to send the unlock request again.
for 1 account ->1 phone per calendar month, i.e. From the 1st of each month you can unlock the next device.
gray.cat , Post has been editedlk2322 - 19.08.18, 15:37
At the request of the suffering detailed instructions for the official unlocking of the loader under its account. It is useful for those who have a smart bootloader come with a unlocked loader, but it is not unlocked by you and not under your account, and in general it is not clear how. Such a smart can write in the system unlocked, and the FastBoot is blocked. It is probably pupil, which is extremely bad.
But, even if it is unlocked in the system and in FastBoot, it means that someone else's account, and there is an oversight or an error at which the bootloader of the Chinese smartphone on the global firmware is blocked (this has already happened by overwhelming, the human factor may happen For software) - you get a confident brick and get on your nerves / money when visiting an authorized service center.
Think about what. I bought a Chinese on Ali and got it in the factory packaging sealed, with the Chinese global installed. Honestly waited for a timer, unlocked the loader under his account and with complete confidence that he would always raise such a possible brick - he put himself a custom. Why am I sure about that? Yes, because by closing the downloader from the Chinese device, and having received a "brick" on a global or custom, I always will always open it to Miflash_unlok for a few seconds under my account (I just repeat the procedure, but already without a timer) and I will get the newly working smartphone. And those who thoughtlessly block the bootloader on the firmware of another region, without reading the cap, nor such manuals - are now with "bricks", because with the current confusion with the service centers they refuse to repair (even non-warranty, for money!) If the device Bought through an unofficial channel. The only way to raise such a "brick" is to access the account with the resolution of the EDL firmware and flash the original Chinese stable into it, but now there may not be such accounts in official services, I feel about simple mortals, they all had permissions quickly canceled .
In general, remember: time / nerves / money!
How do you prospect?
So for those who want to use their excellentChinese Smart confident and trouble-free Under its account :
Post has been edited____OC____ - 14.11.18, 07:31
But, even if it is unlocked in the system and in FastBoot, it means that someone else's account, and there is an oversight or an error at which the bootloader of the Chinese smartphone on the global firmware is blocked (this has already happened by overwhelming, the human factor may happen For software) - you get a confident brick and get on your nerves / money when visiting an authorized service center.
Think about what. I bought a Chinese on Ali and got it in the factory packaging sealed, with the Chinese global installed. Honestly waited for a timer, unlocked the loader under his account and with complete confidence that he would always raise such a possible brick - he put himself a custom. Why am I sure about that? Yes, because by closing the downloader from the Chinese device, and having received a "brick" on a global or custom, I always will always open it to Miflash_unlok for a few seconds under my account (I just repeat the procedure, but already without a timer) and I will get the newly working smartphone. And those who thoughtlessly block the bootloader on the firmware of another region, without reading the cap, nor such manuals - are now with "bricks", because with the current confusion with the service centers they refuse to repair (even non-warranty, for money!) If the device Bought through an unofficial channel. The only way to raise such a "brick" is to access the account with the resolution of the EDL firmware and flash the original Chinese stable into it, but now there may not be such accounts in official services, I feel about simple mortals, they all had permissions quickly canceled .
In general, remember: time / nerves / money!
How do you prospect?
So for those who want to use their excellentChinese Smart confident and trouble-free Under its account :
Prsed that your MI account is introduced into the smartphone!
Make a full backup total, in the system, and save (better and on PC and inMI cloud your account! ).
1. Restart Win10 in mode without checking driver signatures. For other systems, you are convinced that the drivers were installed correctly.
2. Download the last miflash (1) and miflash_unlock. (2) From the official page MI.com.
3. Install both programs with all drivers.
4. Reboot in the normal boot mode Win10.
5. Download Edge stable Chinese firmware for fastboot. For mi8 here is a link to Official page (down to click right hieroglyph - for fastbut, the extension of the firmware must be.tgz) . For other devices, look for analogy.
6. Unpack it with Viryrira in C: \ and rename the unpacked folder into something short, type 777. On the way C: \ 777 \ must be .Bat files and folder (s). If so, then everything is done correctly.
7. Translate smart to fastboot by closing on the screen turned off ("Vol-" + "Power"), you get a picture of a hare in the Ushanka, reading android. Connect smart to PC.
8. You run the program (1), select the folder "777" there, click Refresh, in the window you see the plural of connected smart. So everything is OK.
9. At the bottom of the program window (1) you choose "Clean and Lock".
Attention!
If you are not sure that all items above have fulfilled or there are doubts that it will be powdered without problems (driver, cable, PC port, etc.), you first sew the firmware only in "Clean" mode without blocking the bootloader. If everything goes well and the system will start booting, then repeat the firmware already in the "Clean and Lock" mode.
10. Click Flash, waiting for the end of the installation and restart Smart.
11. In the system, tie a smart to your account, then go to the Developer Options menu and match the smart with the account in the MI Unlock Status menu ("Add This Device With Account" button). Get a pop-up binding confirmation window. So everything is OK. Next allow usb debugging.
12. Overload smart to FastBoot.
13. Run the program (2).
14. Enter your account there and click Unlock.
15. At best, you get "OK", at worst - a timer for 1440 hours. Usually all 720 hours.
16. After unlocking, put any firmware, but note that if you put firmware on your Chinese device from other regions (RU or MI) and block the bootloader - get a confident brick and lose not only the data, but also the best minutes of your life, although you can re-unlock the bootloader Without a timer in a couple of minutes, Miflash program! :)
Good luck and all the best!
Make a full backup total, in the system, and save (better and on PC and inMI cloud your account! ).
1. Restart Win10 in mode without checking driver signatures. For other systems, you are convinced that the drivers were installed correctly.
2. Download the last miflash (1) and miflash_unlock. (2) From the official page MI.com.
3. Install both programs with all drivers.
4. Reboot in the normal boot mode Win10.
5. Download Edge stable Chinese firmware for fastboot. For mi8 here is a link to Official page (down to click right hieroglyph - for fastbut, the extension of the firmware must be.tgz) . For other devices, look for analogy.
6. Unpack it with Viryrira in C: \ and rename the unpacked folder into something short, type 777. On the way C: \ 777 \ must be .Bat files and folder (s). If so, then everything is done correctly.
7. Translate smart to fastboot by closing on the screen turned off ("Vol-" + "Power"), you get a picture of a hare in the Ushanka, reading android. Connect smart to PC.
8. You run the program (1), select the folder "777" there, click Refresh, in the window you see the plural of connected smart. So everything is OK.
9. At the bottom of the program window (1) you choose "Clean and Lock".
Attention!
If you are not sure that all items above have fulfilled or there are doubts that it will be powdered without problems (driver, cable, PC port, etc.), you first sew the firmware only in "Clean" mode without blocking the bootloader. If everything goes well and the system will start booting, then repeat the firmware already in the "Clean and Lock" mode.
10. Click Flash, waiting for the end of the installation and restart Smart.
11. In the system, tie a smart to your account, then go to the Developer Options menu and match the smart with the account in the MI Unlock Status menu ("Add This Device With Account" button). Get a pop-up binding confirmation window. So everything is OK. Next allow usb debugging.
12. Overload smart to FastBoot.
13. Run the program (2).
14. Enter your account there and click Unlock.
15. At best, you get "OK", at worst - a timer for 1440 hours. Usually all 720 hours.
16. After unlocking, put any firmware, but note that if you put firmware on your Chinese device from other regions (RU or MI) and block the bootloader - get a confident brick and lose not only the data, but also the best minutes of your life, although you can re-unlock the bootloader Without a timer in a couple of minutes, Miflash program! :)
Good luck and all the best!
Post has been edited____OC____ - 14.11.18, 07:31
The circle closed)
There is a Redmi Note 3 phone without having a MAC address, so that it is necessary to open the bootloader to all the restore, and enter the account on the phone will not work.
Mofleshank writes Current Account Cannot Unlock This Device
How to be ???
Post has been editedgramo3eka - 19.08.18, 17:28
There is a Redmi Note 3 phone without having a MAC address, so that it is necessary to open the bootloader to all the restore, and enter the account on the phone will not work.
Mofleshank writes Current Account Cannot Unlock This Device
How to be ???
Post has been editedgramo3eka - 19.08.18, 17:28
Gramo3eka @ 19.08.18, 17:33
Phone Xiaomi Redmi Note 3 Pro (Kenzo)
gramo3eka if I'm not mistaken on Kenzo there is an unofficial uncooked method Unlocking the boot XIAOMI (Post varalex # 46637079) LK2322 @ 19.08.18, 16:37
for 1 account ->1 phone per calendar month, i.e. From the 1st of each month you can unlock the next device.
This nonsense in the header does not correspond to reality. Either the information is erroneous, or it is outdated and is not more relevant.
Standard 360 hours after binding receives any device, tied to the same account in the same month.
You can unlock at least 10 devices per month on one account.
Gray.cat @ 08/19/18, 18:20
Standard 360 hours after binding receives any device, tied to the same account in the same month.
Here tied 10 bodies, unlocked the first, and on the second, the program will ask you to come next month.
Binding and unlock, things are different.
Dima_APatity @ 19.08.18, 19:22
Here tied 10 bodies, unlocked the first, and on the second, the program will ask you to come next month.
Binding and unlock, things are different.
Binding and unlock, things are different.
You yourself were convinced of this, or it is not clear where the information came from the header?
2 pcs. In a month, I accurately unlocked on one account in one month. After the meter expires, the standard unlocking without problems.
The program does not care what the device will be unlocked in your month in your month, 360 hours have passed - get unlocking.
Post has been editedgray.cat - 19.08.18, 18:28
gray.cat Yes, naturally met with this, and did another account. First, the calendar month is meant. And not exactly 30 days from the last Anneok.
Secondly, the same Rand is not excluded, due to which some and the meter do not receive, and immediately unlock their devices.
Yes, and the question given above is a person says that the tendency is "one device a month", persists.
Posted on 19.08.2018, 18:29:
Gray.cat @ 19.08.18, 18:24
The program does not care what the device will be unlocked in your month.
[email protected], 19:28
Yes, and the question given above is a person says that the tendency is "one device a month", persists.
He asked him because he saw this disinformation in the header, and not because he collided himself.
Information"One Mi Account Could Only Unlock One Device Within 30 Days" from MAR-23-2016 is clearly outdated and no longer relevant.
Post has been editedgray.cat - 19.08.18, 18:38
gray.cat, And what removed the text about the link? Here, readhttp://en.miui.com/thread-246705-1-1.html
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement