Huawei E5573 (E5573Bs-320: E5573 Beeline, Megafon MR150-3; E5573s-156: MTS 8210FT) - Firmware | [Firmware] Talk firmware



Rep: (680)
FirmwareHuawei E5573
Discussion пїЅ | Firmware пїЅ

Attached Image

Attention!
  • Flash your devices with firmware strictly under your version of the device (see all the letters and numbers in the model name), otherwise you can get "brick" !!!
  • Dear Yota users, if possible, read this topic before asking:Bypass Internet distribution restrictions Yota

Modifications
  • E5573Bs-320
  • Beeline E5573
  • Megaphone MR150-3
  • E5573s-156
  • MTS 8210FT
  • E5573s-320
  • MTS 8210F
  • E5573Cs-322

Drivers
Firmware


E5573Bs-320 (Beeline E5573, Megaphone MR150-3)
E5573s-156 (MTS 8210FT)
E5573s-320 (MTS 8210F)

E5573Cs-322(Huawei)

Useful


Post has been editedferhad.necef - 08.03.20, 16:27
Reason for editing: Install the modified firmware, IMEI change and fixing TTL for neoperatorskogo E5573Cs-322



Rep: (2656)
z0f @ 07.09.2016, 12:25*
Duc zagruschik a shed on E5573Cs-322 for "needle"

More need to "needle" has earned, ie, Contact find.
Then get the OEM codeby this method.
Firmware can not sew.



Rep: (48)
and vsetki who say that - on ote
some interesting Prosha more stable raboaet
_21.200.11.00.00_M_AT_04 or _21.316.03.00.143_M_AT_04?
primarily interested in the quality of reception and hopping 3g - 4g
or so - unless the Maghazi 21.200.HH then put 21.200.11.00.00
and if 21.3HH.HH.HH.HHH then probably 21.316.03.00.143?

Post has been editedz0f - 15.09.16, 09:23



Rep: (0)
Good afternoon. Please help with the router, and then I end confused.
Immeetsya router MTS 8210F. I want to unlock it at Yota. So:
1) download and install the driver (FC_Serial_Driver_Setup.exe, HUAWEI_DataCard_Driver_5.05.01.00_Setup.exe, HUAWEI_HiLink_Switch_Driver_Setup.exe)
2) connect the router without the sim card to the computer, turn it on.
3) Run the DC Unlocker
manufacturer - Huawei modems
model - Autodetect (recommended)

Applications found port COM8

Modem found: E5573s-320
Model: Huawei E5573 (untested)
IMEI: 860861033905898
Serial в„–: V5Y7S16505005837
Firmware Version: 21.316.03.00.143
Dashboard Version: WEBUI_17.100.14.00.143_MRE5
Web UI version: WEBUI_17.100.14.00.143_MRE5
SIM lock status: Locked (Card Lock)
Attempts to enter the code: 1 (left unblocking attempts: 9)



4) Download the firmware checkpoint P711s-E5_Update_21.110.99.02.00.exe, run it, and brought fleshkod .. is right, there is a minute error 19 falls.
I tried as a checkpoint firmware P711s-E5_Update_21.110.99.04.00.exe, but the request to enter datacode, my fleshkod not suitable.



Rep: (48)
sorry once nerassmotrel
Firmware version: 21.316 .03.00.143
UTB disassemble the router and method of the cap about the needle
Huawei E5573 (E5573 Biline, megaphone MR150-3, MTS 8210FT)
neither how to sew and how to parse here:
https://www.youtube.com/watch?v=_m3nkAcmThE
but exactly MTS 8210F? I'm in the last week of 2 bought a 2xx 3xx firmware instead
all MTS nirazu 3xx nepopalas ...

Post has been editedz0f - 15.09.16, 21:51



Rep: (0)
After the transition firmware enter: AT ^ NVWREX = 8268,0,12,1,0,0,0,2,0,0,0, A, 0,0,0, or AT ^ CARDLOCK = "Flashcode"?
Sim is scheduled Yota.

Posted on 15/09/2016, 19:26:

OK. Tkni please about needle method and sequence of actions. What firmware set. Thank you in advance

Post has been editedStavpas - 15.09.16, 19:27



Rep: (324)
* Stavpas, Huawei E5573 (E5573 Biline, megaphone MR150-3, MTS 8210FT) read and firmware sew those that cap for your model



Rep: (0)
I have already downloaded the firmware, just in different positions about the "needle" is written about balong_usbdload.exe and usblsafe-5573bs.bin. It turns transitional insertion of a cap is not needed? I honestly confused.



Rep: (324)
* Stavpas, I gave you a link, there are 2 ways the same as it is convenient and useful, but to sew the firmware of your model that is incomprehensible. It does not go with the expectation of the first OEM code? Try the second through the needle

Post has been editedkarendressig - 15.09.16, 19:43



Rep: (48)
z0f @ 05.09.2016, 14:39*
E5573Cs-322 unlocked iPhones from Citylink

So just continue without Akuma of connecting to a computer, he blinks 2 extreme
a needle made of this pointhttp: //savagemessiahzine.com/forum/dl/post/8657323/888.png
there are two ports PC UI Interface and ann intrfeys on terminal commands responsible
krakozyabrami
usb hand until later I try to 3 usb 2
I tried to usb2 - still blinking

Post has been editedz0f - 16.09.16, 15:24



Rep: (2656)
z0f @ 16.09.2016, 13:53*
there are two ports PC UI Interface and ann intrfeys on terminal commands responsible
krakozyabrami

This is the usual mode of broaching instead of one that is needed to fill the loader.

When will collect, put response to the commandAT ^ SYSCFGEX =? .



Rep: (48)
rust3028 @ 16.09.2016, 15:02*
This is the usual mode of broaching
yes I do understand ... and then that Morgan is also held here only once, he almost
starts blinking when connected to usb
zamykalku simply pass the first time and do not know how other modifications behave when connected to usb
Clip looked there nesvetyatsa diodes generally in any variation
By the way about bringing out - board prisutstvuyut UFL antenna connector ... well not out.
but it is convenient for example ... there are pigtails
uldr_oem-nck_e5573b pour through shell BE hour has yet to find a point neudalos
karoch come to naught, tomorrow I will take the tester and measurement of pyatachek over usb stick and that so scary

Post has been editedz0f - 16.09.16, 20:31



Rep: (0)
So, with my MTS 8210F everything turned out. Many thanks for the link. With the help of videos and instructions to unlock the router. Now it is not clear from this etoy. There sim Ota for modems and routers 4G. As I understand it for the tablet or smartphone Simcock need to change imei. And for the router, you need to do? I inserted a sim card in the router, set up a profile (AP yota.tu and internet.yota) but do not want to work.



Rep: (48)
* Stavpas,
on the previous page command including restrictions TTL

only sense in using a modem sim card !!! it is more expensive - just a bot current in the LTE - 2 and roaming with megaphone Unsupported 3
and the rate cuts -4 (((na course there are 5 - Unsupported operation in Hi-link mode, but it is not for sure, but why else would it have nepashet
or you have it in the Validating intended device in advance ... and because nepashet
Take the SIM to the phone ONLY !!!
first insert it into the body and activate through a program do not forget to set the min tariff without prescription))) on the following dates
the network settings on the phone and see the APN settings for your region
and just try to stalemate
Stavpas @ 17.09.2016, 11:16*
As I understand it for the tablet or smartphone Simcock need to change imei
to use the SIM phone gadgets such as Modem \ Router change imei ... kanechno desirable but not critical
I won my case up until ... cant unlock firmware and nothing ...
working on Ety phone sim card ... just for this you nada hereBypass Internet distribution restrictions Yota

and I have a question to experts and can be permanently other imei pour? so after reset it to factory unchanging?

Post has been editedz0f - 17.09.16, 13:05



Rep: (48)
E5573Cs-322 - FOUND BOOT POINT))

* rust3028,

I received OEM

Post has been editedz0f - 06.10.16, 22:17



Rep: (2656)
z0f @ 18.09.2016, 05:57*
^ SYSCFGEX :( "00", "01", "02", "03", "99"), ((2,000,000,400,380, "GSM900 / GSM1800 / WCDMA BCVIII / WCDMA BCI"), (280000, "GSM850 / GSM1900" ), (3fffffff, "All bands")), (0-2), (0-4), ((800c5, "LTE BC1 / LTE BC3 / LTE BC7 / LTE BC8 / LTE BC20"), (7fffffffffffffff, " All bands "))

One to one, as in the modem E3372.
The E5573 (B) s-320 six LTE bands were ...

*
I received OEM

As usual,
AT ^ DATALOCK = "code_OEM"


Post has been editedrust3028 - 18.09.16, 10:52



Rep: (48)
rust3028 @ 18.09.2016, 11:47*
As usual,
done ... the first thing eror writes an entry in the nvram
and send directly from the console after the method? or a normal boot after sw_mode_E3372_new script?
I did in the normal load at the port FC - PC UI Interface - AT ^ DATALOCK - takes normally OK, AT ^ SPWORD also ok and AT ^ NVWREX - eror
pahodu need unlocked zagruschik

Post has been editedz0f - 18.09.16, 11:52



Rep: (2656)
* z0f,
After sw_mode_E3372_new.

Posted on 18/09/2016, 11:45:

Fully AT ^ NVWREX team show.



Rep: (48)
rust3028 @ 18.09.2016, 12:44*
Fully AT ^ NVWREX team show.

Answer
AT ^ DATALOCK = "52525508"
Ok
AT ^ SPWORD = "52525508"
Ok
AT ^ NVRDEX = 50502,0,128
ERROR
AT ^ NVWREX = 50502,0,128,12 B1 1F B6 3B BC 7B 90 99 91 66 29 5C FB CE AE ED 4C 69 41 C7 0F 4B B4 4E 08 56 FF 1E 5B C2 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 C9 BF 44 65 74 87 19 D6 B9 9C CD 41 92 E8 DE 56 E1 37 0B 64 BE EF 28 C4 9B 80 E3 32 3F C8 3A 89 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ERROR
even reading does not ... I just have a nose pecked night and checked
and as already dogadyvaeshsya vkontse 01 to 00 has changed ...
but
at ^ nvwr = 0,16,03 February 5 August 1 01 00 9 April 00 June 9 August 7 02 00
Ok
AT ^ NVWREX = 8268,0,12,1,0,0,0,2,0,0,0, A, 0,0,0
Ok
happened
strange or puts any ssevo line added
Found modem: E5573Cs-322
Model: Huawei E5573 (untested)
IMEI: 352811049096872
Serial NR. : DGFDW16714000142
Firmware: 21.318.03.00.778

Compile date / time: Jun December 2016 15:33:53
Hardware ver. : CL1E5573CSM11 Ver.B

Dashboard version: WEBUI_17.100.15.01.778_MRE5
Web UI version: WEBUI_17.100.15.01.778_MRE5
SIM Lock status: unlocked


Post has been editedz0f - 18.09.16, 13:12



Rep: (2656)
* z0f,
So it should be. Operations with cells 50502 and 50503 are locked in the new firmware.



Rep: (48)
... more correct in the adjacent threads of cap that he is not entirely neutered connectors
by antennas - they just do not have the outside ... but in just one vayfay razemchik pochikal
Attached Image

Attached Image

... and the characteristics of itself

Post has been editedz0f - 06.10.16, 21:37


Full version    

Help     rules

Time is now: 28/03/20, 4:05