Do not rush to stitch c of. site. This model has three versions of the boards !!! That is three firmware for NP725 under Display IPS (black body) and three firmware for NP725 SD (white building). The truth is the third version of firmware is common, so that all 5incompatible firmware.
At the office. Online firmware for the second version.

Post has been edited_Vladimir1 - 31.01.16, 22:52

I just white hull, but that's because Android 4.4 does not read the external memory card.
This firmware upgrade for the white will help the problem?

13Odessitka13, May I help.
It is necessary to sew and check what both rise

thanks for the advice. Now to learn how to flash the most :). It is important to me there like that is not present and is not something to lose trashno :)
dj-egor1994,
You can advise to make re-flash 4.2? her husband also Bravis, but Alpha and had no problems with the card

13Odessitka13,
Which version you need only quadrupeds master which he is going)
Take the firmware pack from the off. Site and one sew and check the pluses and minuses.
Perhaps that is not the case in the firmware and in the card slot.

Taran.ua, Pere beg sink, custom bikes until he watched once.

firmware exactly vinovata.Na different card can throw off the computer, the card is read everything, but with the smart phone to the card, neither of which I can not throw.
Software is already downloaded from the site. I will now deal itself, the son refused to "nonsense" to engage :(
And since I'm happy with my Bravis: blush:

Post has been edited13Odessitka13 - 15.03.16, 04:20

13Odessitka13, Well, how is it?)
Happened?

Guys give the link above to firmware Bravis NP725 or of.sayt with proshyvkoy - can`t find myself (((

romaikalyk
there is a firmware
BRAVIS-NP-725-3G_141030
BRAVIS-NP-725-3G-IPS_141029_ForFlashtoolFromReadBack_150612-162427
NP725IPS 0318NEW KT07_MB_MT6572_V18 03.09.15

They do not stayut on my plate - I have a white color.
Oshybki 4032.
There are versions proshyvok ???

USBDeviewTry to remove all the drivers are associated with the tablet via yusbdeviev which is given to the link after you restart your computer to reinstall.
(4032) S_FT_ENABLE_DRAM_FAIL


Error 4032 was encountered while trying to change the firmware on a device with an MT6589 processor through the Sp_Flash_tool program.
The device was revived by formatting the phone via the Format button (do not do it if you have a device on an MT6575 or 6577 processor) in the sp_flash_tool program, then downloaded the official firmware and flashed it with all the check marks via the download button. Sometimes you need to remove and reinstall the drivers and re-format, and then reflash if the previous attempt was unsuccessful.

The same error occurs with the wrong block preloader. Need to find a home preloader and flash it. If the firmware is the standard method does not work, you may have to flash the device via testpoint.
preloader point is generally not recommended to alter unnecessarily try to flash in paragraph download only and uncheck the preloader If you have not had time to formatnut tablet.
This is a personal experience on the unit Bravis believe. How will you, I do not know.
Remember that all manipulations with the device you are doing on your own risk

Just decided to leave it here, can someone come in handy

Restore the firmware after an unsuccessful

Sews the tablet firmware to the office. site, eventually received a brick is not defined in the Task Manager. Search all the expanses of the Internet has given nothing.
As a result, he has found a solution:

1. Parse tablet.
   
2. Unsolder red lead (+) of the battery from the circuit board.
   
3. Connect the USB, the tablet is defined as mtk usb port.
   
4. Disable USB.
   
5. Solder (+) is carried back.
   
6. Connect the USB.
   
7. Sews another firmware.

In case of failure - to repeat a sequence of actions.

tryK7V2.0_MTK6572_UK_MT_02_3G_512_4_WVGA_BRAVIS_V0.2It is for white, I just walked it

And yet there are different firmwareHERE

Post has been editedVindi - 18.11.16, 20:44

Bravis NP 725 3G IPS Black
Model: KT07_V18
BOM: KT07_MAIN_EBOM_V2.9_20141017
Can someone sews a aparata, what would not guess that put him!

Post has been editedANDRUHA 22 - 28.11.16, 01:03

dj-egor1994,
Good day! Please help with the tablet Bravis NP725 3G IPS. Not successfully flashed and now in the Device Manager poznachaetsya as the "MTK USB Port". Just when the tablet is connected, he then disappears then appears in the Device Manager. How to revive it? Thank you in advance! His model in the photo.



Post has been editedMaistre - 28.11.16, 17:53

Maistrov post в„–15 one that is higher in help!

ANDRUHA 22,
Did not help! The plate is defined as "mtk usb port" device that unsolder wire that without. When you try to sew I get an error


I downloaded the new Flash Tool and do not know that there need to choose, tell me?

Driver may not be appropriate, in my own cable is the same cable was replaced the problem went away. Or sew without battery when connected, press and hold the volume +. And maybe even pour poser skater file need to throw in your firmware and sew.

Post has been editedshkoda47 - 29.11.16, 20:52