[X]Assistant

[NiXeD]

3D пїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ (TV Box) пїЅпїЅпїЅ пїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ? download

M8S +
Description of the problem:
Comrades, I want to buy a TV and Androyd console (presumably m8s + or minix u1), I also want to watch a 3D movie. The question is as follows:

Does 3D need support on TV? Or somehow you can implement 3D only with the help of the console, for example, buy some glasses that connect to the console? Those. if absolutely simple:
1) TV with support for 3D + prefix, the question in watching 3D disappears.
2) TV without 3D support + console, will it be possible to watch 3D???

If implementation is possible only on the console, then add some points to the console.

The complexity of the choice is that the difference between the absence and support for 3D is 5k rubles. Actually, the cost of the console.

P.S. I apologize if I made a mistake with the section, I did not understand where to post such a question.

[giperion85]

for4man @ 11/13/16, 16:06

The main thing is the presence of the correct hardware decoder. In this prefix T8 is present. And in this console is complemented by bi-directional transmission of the wifi signal.

I think you are misleading people, did you try to run 3d mvc in isoshnik? Something I suspect is not, but for now, none of the owners have unsubscribed that I was able to reproduce this format

[for4man]

2) TV without 3D support + console, will it be possible to watch 3D ???

An interesting question only from the technical side of the manufacturer of TV. 3D is just a format, a function. For its implementation on TV you need one of the conditions - the main signal transmission with a frequency of 120Hz. Translating into everyday communication language - the frequency of the sweep on the TV should be 120Hz, without it 3D will not work.

You are misleading people, you yourself tried to run 3d mvc in isoshnik?

no one introduces anyone, especially since it was only hardware support, everything else is your speculation and fiction} -)

Post has been editedfor4man - 14.11.16, 01:05

[DJ_Alexx]

I have a mini m8s ll, the launch of 3d through coding and video was not a success. Either gives a horizontal stereo pair or 2d. Settings all shoveled.

[nessy74]

[email protected], 00:05

S905_Public_Datasheet_V1.1.4.pdf

Yes, but it is on the S905, but I would like to have a newer S905X

[email protected], 00:05

I also have a S912 ... attach a large brochure does not want a forum

I would be grateful if you post it on some file sharing service and give a link (here or on the LAN)

[s [N1cKe] Rs]

Good day to all. I want to buy a 3Q F370HW prefix for a 3D TV, nowhere in stock. Advise similar in the region of 3 thousand.
It must be HDMI (TV) and optical digital audio (receiver) to read ISO BD3D.
Shl tired of writing on dual-layer blue-ray discs 3D, wait 2 hours. I want to download on hard and watch it. I hope the quality will not suffer.

Post has been editeds [N1cKe] Rs - 14.11.16, 15:54

[swr1980]

I recently acquired Tronsmart s96 on Amlodzhik 912 - 3dBlyurei via code 17, HVMS - only in 2D it displays, if you send an off-line request for HVMS, will there be support for 912? Answer: Amlogic S912 currently, thanks for your support. In Cody and Hvms when playing Blues, there is only a forced choice - mountains. or vert. stereo pair (in the course of a program, a 2D picture splits into a pseudo stereo pair). The MA-DTShd sound plays, but my Samsung 9750 DC only provides 2 channels (I set 7.1 in Cody's settings) when switching to a DTS track (on the same disc) - also 2 channel, but if another mkv file with a dts track goes all 6 channels. I sin on the DC itself - I made a conclusion from a media player via HDMI, because spdif does not pull the stream above 1.5mbit. Stereo pairs go smoothly, even on other players mxpro and so on. According to Wi-Fi, the speed at 5 GHz is 90 + mbps. (Reception) and 80-90 return - stably keeps without any problems.

Post has been editedswr1980 - 20.01.17, 12:36

[misspike]

Good day,
I have been reading w3bsit3-dns.com for a thousand years, well, now I have a need to register in order to understand something.
I choose a set-top box for home / family, and one of the requirements, as for me, is 3D viewing (3D TV with lg function of 2014). I never used this kind of prefixes, I just connected the tablet via xdmi. There are a number of questions:
1. How specifically is 3D implemented in TV Box? Say you open a 3D film, then a vertical or horizontal stereo pair is output and press the 3D button on the remote from the TV set? Or is the finished 3D image immediately displayed?
2. To play 3D video, do you need a special function in the player program or does it play normally? (This question has something in common with the first one, but I’d better ask separately);
3. Many people write that 3d is fuzzy, that is, there is no perfect blending of top / bottom pictures (for vert stereo pairs for example), do I understand correctly? I somehow tried to watch 3D from a tablet at the beginning of using telecom, so there was such an effect, just the picture from the tablet was not clearly shared in the middle of the TV, since the bottom panel of the tablet is displayed on the TV screen. I read somewhere that this is due to the connection via HDM and for correct transmission you need to connect via USB, I don’t know if it’s true or not. Then, having bought external hard, I saw the light of what 3D is at home))
4. For me, 3D on the console, first of all, means that you can watch the movie ONLINE from the rerurse as a root-tracker, for example, using the torrent of Ace Stream streamer. Is it possible
Actually, I’m watching 3D in full HD, 8–12–15 GB in size, in mkv format, I don’t shake larger sizes, because you don’t need 42-inch telephones, as for me.
I would be grateful if someone will answer :)

[swr1980]

1. If you have a TV with 3D, then you can watch stereo pairs with a built-in player, especially lg from it through the lowercase passive 3D.
2 pictures are output from the console - mountains. or vert. (as well as when playing the internal TV player), and then - as usual, select the desired stereo pair. In zidoo and some others, it is possible to play 3D images directly, but for your TV there is no difference, because I repeat - interlaced image is displayed in passive 3D (for one eye - even lines, for the second - odd).
According to claim 3 — I didn’t notice from the phone through Cody.
P.4 - again - see Clause 1. IMHO prefix is ​​needed either for tv without smart (android, etc.) or to view BluD3D with the ability to output DTS (DD) -HD with a stream of 2Mbps

[misspike]

Thank you, something enlightened. I now remembered that somewhere I read that the 3D image is fuzzy, if output via hdmi, and clear, if via usb. True or not?
And yet, on the topic of branches, so to speak :):
I understand that the android here is slightly modified, not like in a phone or tablet? Accordingly, the play market is yours, with its versions for Android TV, or is there a standard market with all the applications without any modifications?
And another important moment for me - no one "screwed" the steering wheel to the console ??
I ask all this, because I want to have as a result such a multimedia game console based on Android, as far as possible. And I suspect that children will very much want to install their games: D

Post has been editedmisspike - 12.02.17, 14:52

[romanzp3]

Hello, everyone. Many Chinese set-top boxes went through the hands. I stopped at the Amlozhike. Now I am in the hands of t95x and int box i7, respectively, on 905 and 912 processors. I ran into a problem like everyone else — the discrepancy of the picture is very big. the screen goes beyond tv.tak as viewing 3 d case is not daily, then Units viewing can change the position. View 3 d became like on the built-in player of the TV. The problem was solved, otherwise it was already upset

[romanzp3]

About the steering wheel with pedals. The steering wheel is there, but I have not tried to cling since support for games with such a function is not. Heympad Bluetooth hooked up, but there are very few games with support. gamepad wound up

[eXodusN]

Hello. Tell me, will the BD3D ISO work on the Beelink GT1?

[nessy74]

EXodusN @ 20.02.17, 13:54

Will the BD3D ISO work on Beelink GT1?

Will not be.
This is an S912 chip problem.
read here:
3D On the TV box, how does it work? (Post nessy74 # 54293598)

[Alexey.g @]

Misspike @ 12.02.17, 16:34

That the 3D image is fuzzy, if output via hdmi, and clear, if via usb.

Complete nonsense, everything is fine via HDMI

Misspike @ 12.02.17, 16:34

I understand that the android here is slightly modified, not like in a phone or tablet? Accordingly, the play market is yours, with its versions for Android TV, or is there a standard market with all the applications without any modifications?

On the console, the usual android, only the launcher makes his own for the convenience of controlling the console, and then not always. You can install from the market all the same as on the phone. only during management problems may arise as there is no sensor on the device.

[Pauliusw]

Accidentally I went in and read the whole topic (since it’s small: D). My devices in the "signature" will not list. All who can not live without 3D, ask for "OK",: yes2: there is a lot of this content. For example, the group HSBS, VOLUME WORLD, and others. : D. I look, for example, directly from the site (on the console, as a smart TV browser is not designed for this) .. And you do not need to download anything, turn it on and enjoy. : thank_you :. There will be specific questions - write in a personal: yes2:

[Wildmarak]

Good evening, the KM8 pro prefix arrived today, trying to launch normal 3D on an LG TV that supports this 3D.
So what's the problem, if you run through smartTV then the picture is good, but in some scenes it lags a lot, it seems he just doesn’t have enough power :(
And if you run through the same KODI in the console and put the 3D mode through the TV remote, then some sort of biaca is displayed ... like 3D is, but it’s impossible to watch it for yourself :( How can I fix this?

[ukrTOLIK]

WildMrak @ 05/23/17, 20:10

arrived today prefix KM8 pro

Can it reproduce 3D?
3D On the TV box, how does it work? (Post nessy74 # 54293598)

Post has been editedukrTOLIK - 10.06.17, 12:32

[yumi232]

I can say something naive now.
But what prevents the console from taking a movie of any 3D format and outputting a full-screen image through hdmi frame to the left and right eye. At the same time, it turns out that 3D support in the TV itself is not needed. And even 120Hz is not necessary. Well, there will be a picture in each eye flicker with a frequency of 30 Hz. What kind of TV, and such 3d. In theory, at least on a black and white TV "Birch" you can start up 3D, through the appropriate converter.
Of course, this is 3D for active glasses, which should be able to synchronize via BT with the prefix. It goes without saying that BT should be in such a prefix.
Eventually. All you need is a prefix that can read various formats of 3D movies with built-in bluetooth and corresponding software.

[Pauliusw]

yumi232 @ 06/19/17, 10:16

I can say something naive now.
But what prevents the console from taking a movie of any 3D format and outputting a full-screen image through hdmi frame to the left and right eye.

..... yes,: D ..goods. : rofl:

[Wildmarak]

ukrTOLIK @ 06/10/17, 1:27 PM

Can it reproduce 3D?
3D On the TV box, how does it work? (Post nessy74 # 54293598)

Yes, I do not have 3D bluray, but ordinary stereo pairs.
Just the image is displayed as it is crooked ... that is, when you turn on 3D from the TV, how it all happens. I will describe step by step:
1) I turn on the video itself
2) a stereo pair image appears as in the screenshots (divided into shots)
3) I click the 3D button in the TV menu - the picture is transformed, the images seem to overlap each other, then the 3D effect appears when viewed with glasses.

When playing from the set-top box, I can additionally include a conversion to 3D, but the picture is somehow not as if the overlay is not correct ... how to solve this problem?