> Attention!

New threads need to be created only inroot partition! In the future, they will be processed by moderators.

If you posted a new version of the program, please notify the moderator by clicking the "Complaint" button on your message.

Catalog of Android programs



®FeraDroid Engine | Powerful Android device optimizer from the category - all in one.



Rep: (1147)
FDE.AI [root]
version: 9.0.4

Last update of the program in the header:27.04.2020

Attached Image

Short description:
Powerful optimizer Android devices from the category of "all in one", to improve the performance and energy efficiency.
For the operation of the program need the right ROOT user.

Picture
Attention!
Make a backup of the entire system before installing to your benefit.
Before asking a question, see the sections "Android OS FAQ"and"Glossary", read the topic header, as well as use the search on the topic
Do not mix with different FDE.AI uluchshalki and other "all-in-one" tweaks. Those. better to put on a clean system, or you can make it worse. I warned.
Picture
Description
FeraDroid Engine (short FDE) - a kind of uluchshalka all and all devices on the Android platform. All parameters are selected individually to your "iron" automatically configure carefully balanced. Maximum compatible with different devices and OS versions.

Application screenshots
Paid version
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Free version
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Technical Details
FDE.AI - the most versatile optimizer Android OS. Captured various aspects of the operating system settings and the Linux kernel. Thus FDE.AI maximum cross-platform. This means that it is no different hacks, hardcoding, and other third-party libraries. All is done by means of the OS and the Linux kernel. FDE.AI adjusts a plurality of parameters based on the technical configuration of the apparatus and applies optimal settings based on factors such as CPU (architecture, frequency, number of cores), RAM, ROM (type, size), operating system version, etc. The output is that each device is configured individually.
It uses a new method of work - all the necessary ingredients for loading into RAM and run from there. It provides enhanced speed (the defective RAM has a speed of i / o ~ 600MB / s), reduced power consumption (not used i / o internal memory for FDE.AI components), security (system partitions in read-only mode). Just no time synchronization start after the operating system - adequately understand the system really starts. All work is carried out to set up a non-systemic (ie not actually modifying the system).
Generalized list of tunes that FDE.AI
Please note that some features may not be used - depending on the software / hardware of your device. Most of the applied functions will be listed in the log.

- Artificial intelligence with machine learning, CPU turbo acceleration, GPU, and many others.
- Optimization of the file system on all sections
- Optimize touch acceleration
- Activation of acceleration when the screen is turned on
- Optimize CPU synchronization
- Activate acceleration when you press the power button
- Optimize the acceleration of schedulers when entering
- Optimize input acceleration
- Fingerprint scanner acceleration activation
- Optimize CPU acceleration when connecting the kernel
- Optimize dynamic acceleration EAS
- Reduced display power
- Optimization of multi-core CPU
- Kernel Wave Optimization
- Optimize touchscreen sensitivity
- Optimization of the frequencies of the graphics accelerator Vivante
- Optimization of the frequencies of the Adreno graphics accelerator
- Optimization of I / O graphics accelerator Adreno
- Optimization of the graphics accelerator Mali
- Disable debugging of the Mali graphics accelerator
- Disable temperature limitation of the Mali graphics accelerator frequency
- Optimize Input Acceleration for Mali Graphics Accelerator
- Frame buffer optimization
- Disable various unnecessary logs
- Disable forced tests cryptography
- Activation of dynamic file synchronization
- Disable various kernel debugging
- Optimization of the network kernel stack
- Optimize TCP congestion controller
- Disable Doze settings reset
- Optimization of Doze and Light Doze parameters
- Optimization of system animation
- Clearing the cache section of garbage
- Cleaning the user partition from garbage
- Cleaning the internal memory of garbage
- Clear application cache when there is not enough free memory
- Memory optimization MMC
- Automatic I / O Scheduler Setup
- R / W speed optimization for all partitions
- I / O optimization for all partitions
- Optimization of kernel planners
- Activation of ARCH energy saving
- Disable kernel tracing
- Disable kernel scheduler statistics
- Reducing the VM statistics
- Optimization of the entropy generator
- Optimization of the file system cache
- Optimized distribution of RAM by the kernel
- VM cache optimization
- Deactivate VM panic
- Deactivating VM dumps
- Optimize VM read / write speed
- Activation and optimization of VM memory compression
- Disable task dumps
- Optimize VM Memory Regions
- Optimize kernel parameters for file systems
- Disable checking hung tasks for the kernel
- Disable kernel panic
- Disable kernel monitoring
- EAS Optimization
- Disable scheduling parameters increase
- Activation of energy efficient kernel planners
- Optimization of schedulers for multi-core CPUs
- HMP Scheduler Optimization
- Activation of the ARM SWP function
- Activation of the dynamic frequency change of the CPU bus
- Deactivation of core dumps
- Optimization of ANY CPU Controller
- Optimization of Cgroups parameters
- Activating power-saving CPU queues
- Optimize CPU bandwidth
- Turn off LMK debugging
- Optimization of aggressiveness LMK
- Disable logic for fast processing of LMK
- Disable ALMK logic
- LMK OOM reaper logic activation
- UKSM / KSM activation and optimization
- Activation of process recovery logic
- Optimization of the OS boot process
- DalvikVM optimization
- Optimization of memory allocation DalvikVM
- Error checking on all sections
- Optimize multitasking
- Fix system services
- SafetyNET patch
- Optimization of system processes
- Disable unloading launcher from RAM
- Deactivating RIL dumps
- Optimization of energy saving application manager
- Disable various WiFi debugging
- Sqlite optimization (databases)
- Optimize image compression level
- Deactivation of media codec logs
- Activate hardware video playback
- ART optimization
- Optimization of multithreading DalvikVM
- Optimization of the JIT compiler DalvikVM
- Optimize wireless display
- Protection against network vulnerability CVE-2016-5696
- Protection against vulnerabilities Stagefright
- Disable debugging ANR / Dropbox
- Optimization of GPRS / EDGE connections
- Disable application switching delay
- Activate hardware rendering interface if necessary
- Activate triple buffering
- Reduced frame rendering delay
- Enable dynamic FPS support
- Disable DETAIL SETS
- Other ..

Differences free and paid version
The paid version of the application exists to support the development of the project and it has the ability to customize the behavior of the AI ​​and a few additional options.
Free version does not have any settings, the AI ​​is always a "balance" mode.

About AI
As the name implies FDE.AI - hints at the presence of AI. AI idea is that he will understand the script using the device, and based on that adjust the various settings of the system in real time. Also, the AI ​​logic is closely tied to the temperature of the device.
All AI actions are written to the log. The main plus of the AI ​​-no power consumption.

What is implemented:

GPU turbo:
When you run the AI ​​determine whether GPU Turbo can work on your device, and write it in the log. AI will monitor the load level on the video card. If there is a high load for a long time, then the AI ​​will raise the frequency of the accelerator to the maximum by about 30 seconds before the next inspection. As soon as the load decreases, the value returned to stock. All this does not increase the frame rate, but will make it more stable, because the frequency of the accelerator traffic controller does not have to jump over the frequencies at high load, which ultimately have a positive impact on the FPS indicator of stability. In logic there is no reference to the name of the application - the GPU load is measured directly, it does not matter that it loads (game benchmark, etc.), thus making it a universal logic. GPU Turbo will not conflict with the logic of Huawei with the same name. When the device temperature rises threshold GPU Turbo, to avoid overheating.
The logic is only active when ON screen. When switched off, the frequency of the screen back in stock value. It works on most video cards Adreno and Mali.

CPU turbo:
When you run the AI ​​will determine whether the CPU Turbo can work on your device, and write it in the log. AI will watch the level of CPU load. At high load for a long time to raise responsiveness AI regulator CPU and cause it to keep the frequency of the above 'high speed freq.' (About half of the maximum frequency of the CPU) for ~ 30 seconds before the next inspection. In logic there is no reference to the name of the application - CPU load is measured directly, it does not matter that it loads (game benchmark, etc.), thus making it a universal logic. The higher the device temperature - the higher the threshold CPU Turbo (to avoid overheating).
The logic is only active when ON screen. When the screen is off settings return to their initial values. It works with interactive, ondemand, schedutil and based on their CPU regulators.

Frame-buffer boost:
When you run the AI ​​determine whether Framebuffer boost can work on your device, and write it in the log. At the moment, this logic will be used only if there is support for GPU Turbo. Framebuffer boost - the acceleration frame buffer. When accelerating rise rate frame buffer. When using the active GPU (load more than 30%) framebuffer boost is activated automatically, and as a result of the refresh rate is the maximum stable.
The logic is only active when ON screen. When switched off, the frequency of the screen back in stock value. Supported on most devices with SoC Qualcomm.

Force DOZE:
The option is available for devices running version 6.0 and higher. When the screen device is forced into the deep sleep mode (Doze), then, after 3 seconds, the forced operation mode is canceled and Doze continues in the normal mode, leaving the device to sleep.

Machine learning:
At the moment, machine learning (MO) is used only if there is a GPU or CPU Turbo support. Defense will examine how you use your device and customize some system parameters in real time. For example, if you play a lot - the AI ​​will adjust the system for better performance. If you simply write and watch videos - AI will adjust the system for better energy efficiency. If you often do both - AI will decide for himself what to do, for this and made machine learning. The application can be configured FDE constant MO selection preference towards performance or energy efficiency.

Dynamic customization VM:
Every ~ 30 seconds checked RAM usage. Depending on the data obtained VM adjust some settings. As a result, should improve the management of cache in memory.
The logic is active only when the ON display on devices with 4+ GB of RAM.

throttling switch:
This option can be enabled in the application FDE (default is OFF). It activates or deactivates for throttling the CPU and graphics accelerator. When throttling is turned off - the unit may overheat, but the performance will be at the maximum even during heavy use.

Temperature controller:
AI checks the temperature of the device and notifies the log in if it overheats. While this is all that makes this logic.

"Chat" with AI: (Text on a single line - 96 characters)
Starting with version 7 application has the opportunity to correspond with the AI. This can be viewed either as another method of setting the AI, or just for fun. OCR is searched by keywords. The option is still in development. Settings in the "chat" reflect the settings in the application menu.
What can an assistant:
- Display of the message (#help)
- this message is displayed (#help)
- Display brief statistics (#stats)
- Set AI for ext. performance (#performance)
- Set AI for ext. Energy Saving (#powersave)
- Set AI in the 'balance' (#adaptive) mode
- Activate constant boost for heavy games (#hardgaming)
- Display a list of games, appreciated in AI as 'heavy' (#gamelist)
- Empty the chat / log (#clean #chat)
- Close background applications (#clean #ram)
- Clear the cache files of applications (#clean #cache)
- Optimize cache ART (#art)
- Switching startup script runoff Qualcomm settings at OS startup (#dontqcom / #doqcom)
- Switching application build.prop tweaks at OS startup (#dontbprop / #dobprop)
- Switching closing background applications when OFF option screen (#killbgapps / #dontkillbgapps)
- Skip the use of additional tweaks build.prop for the GPU during the boot process (#skipgputweak / #gputweakback)
- Switching operation sensor / sensor device in Doze mode (#toodozed / #dozesensor)
- Switching method of forced mode Doze (#alternatedoze / #normaldoze)
- 'Refreshing' file system partitions all devices - to check for errors and TRIM (#fsrefresh)
- Copy the current log FDE.AI the root of the internal memory as a text file (#dumplog)
- Switching vibration when performing FDE.AI (#novibro, #vibrate)
- Answer to the hi / until some other words on the subject (#hi, #bye)
- Loves hvalbu
- He knows who Daddy
- Other.

Diagram logic of AI:
Attached Image


Pro application settings
Possibility FDE setting is only available in the paid version of the application. At this point in the application the following adjustments are realized:

Optimization of AI in real time: (On / Off regulator)
Setting the AI ​​is responsible for the work in the background and thus adaptive settings in real-time systems based on the scenario of use of the device. If you disconnect - many others will become available settings. If you change the settings restarts all FDE.

Forced running Doze: (on off)
Setting is responsible for the enforcement regime Doze when the screen for improved energy-saving device in sleep mode. In rare cases, it may cause problems in the system. Not recommended for use on heavily modified OS (eg MIUI, EMUI etc.). If you change the settings restarts all FDE.

Permanent boost heavy games: (on off)
Setting is responsible for the turbo AI modes. When the setting is enabled, the AI ​​will keep turbo mode active for some well-known heavy games, but only during their work.

Disable throttling: (on off)
Setting is responsible for the CPU and GPU throttling. Throttling - reset frequency with increasing temperature of the device. If you disable throttling know that you can get a portable brazier, but it will not lose performance at high continuous pressure.

Auto-cleaning back-end applications: (on off)
If the option is enabled, the AI ​​will automatically close all the background (not active) application when the screen is off or found a tough game. Background services will remain intact - regard this option as if you have cleared the \ "recent \ 'application. Use only if you really need at your own risk. Not recommended for use on OS 9-10 and above. If you change the settings restarts all FDE.

Extras. tweaks build.prop (Niko): (on off)
Setting enables experimental tweaks build.prop, connected with GPU rendering and mobile network speeds. These tweaks "invented" not me - use at your own risk. If you change the settings restarts all FDE.

Name AI: (Text on a single line - 18 characters)
Possibility to rename the AI. For fun.

FAQ
Will my old "dinosaur" / top "monster" go?
  • And go to the "dinosaur" and "monster".
Does it make sense to put FDE if I have a powerful device that is already quite productive?
  • There's a meaning. FDE.AI - it's not just about performance, but also about energy conservation. I think you do not give up the additional power savings without sacrificing performance. FDE.AI automatically determines which "iron" is set in the device and selects the appropriate parameters. At the very least should not be worse.
Will it work with “such-and-such” in another pair of tweakers?
  • Extremely NOT recommended. Unexpected problems / conflicts will arise.
Can I use FDE on a custom kernel?
  • Can. From the custom kernel will be even more good.
Do I need a busybox?
  • No. But busybox on the system will not be superfluous.
Are project treble firmware supported?
  • Are supported.
All it worked out, but the log is not updated for a long time. This is the norm?
  • FDE.AI performs various actions in the background only when you really need based on your script to use the device.
I honestly bought the app, but when I run FDE writes - license error. What's wrong? The latest versions are not working mode options are forced Doze and optimize cache ART.
  • Starting with version 5.5, these modes are disabled by default because some firmware causes problems. These options are available within the app (also off by default).
I started, but there is a problem.
  • FDE is in active development. Please provide details about the problem, specifying the model of the device firmware / kernel by root and version recovery. The presence of the log also welcome. I am the developer FDE and try to help you in this thread.


miscellanea
About magisk module and recovery (.zip) version
Johw Wu (Magisk creator) wanted to remove from the repository, all modules optimizers. Therefore it was decided to complete cessation of the development of and support for the free version FDE.AI as a module magisk and archive for recovery. Instead, APK made a free application with +/- the same functionality as the module. So even better. Application is not important to the existence of a custom rekaveri and what your method of Ruth - the main thing that it was.

Archive-udalyator all previous versions .zip FDE (except magisk) from the system -AnyFDE-complete-uninstaller (non-MAGISK)

FDE video

System requirements: OS Android 4.1 and newer. ARMv7-a CPU and newer or x86 (i686).
Russian interface: Yes
Developer: feravolt

Google Play: https://play.google.com/store/apps/details?id=com.feravolt.fdeai
XDA: https://forum.xda-developers.com/apps/magisk/beta-feradroid-engine-v0-19-ultimate-t3284421

In the subject there is a developer. Please refrain from Varese.

Download:
Version: 9.0.4 ®FeraDroid Engine (Post feravolt # 90218510)

Past versions


Post has been editedferavolt - 27.04.20, 20:03



Rep: (232)
The latest version works fine.

Now, after the use of fashion a few days, I can say: the script has a positive effect on the operation of the device. I noticed a significant acceleration and much smoother operation of applications. And of course, the eternal off logging android ( "savings on matches", so write if you disable the logs, that's just me fell into standby consumption of 1% per hour up to 0.5-0.3%. A trifle, like, a nice, and there is )



Rep: (1746)
le] [@ 02.03.2016, 05:37*
... uninstal

®FeraDroid Engine (Post ctas8888 # 47237407)



Rep: (23)
Hello! How do I know that the kernel with init.d? 9 Bethke put all the rules. Updated to stable, wasps not loaded. Reflash clean, I roll any fashion, to bottles of animation does not reach. What to do?



Rep: (1746)
* Surikat_xp,
On the way / system / etc / should be a folder - init.d



Rep: (1147)
FDE v0.20-beta1
What's new:
- A new GPS-based config tweak Android 6.0.1.
- Fixed KSM & uKSM
- Improved the kernel configuration
- Improved the CPU settings
- Better power + 2 GHz CPU with ondemand mode.
- stuff for Spreadtrum boards
- Minor fixes ...

Cap slightly updated) .. I will continue to fill as much as possible. Attach your file FDE.txt here to help me better to see who and how it works ..

And here is the same but the new version is completely disconnected from the Android logging.
Attached fileFeraDroid-Engine-v0.20-08.03.16.zip(1.46 MB)


Detailshere.

Post has been editedferavolt - 07.03.16, 23:17



Rep: (1147)
The latest build with minor fixes ... Those who have the opportunity to describe how GPS works before and after FDE. Should improve significantly.

Attached fileFeraDroid-Engine-11-08-16.zip(1.46 MB)



About .. "fallen off this or that," be on a particular please do not forget .. I could say something about FDE.txt..chtoby file. Or at least a model telefona..versiyu OS.

Possible transfer dannyh..to prichina..chto fallen off the traffic compression that is included on the fly .. just try to restart telefon..ili check point dostupa..vozmozhno reason at all in another. This is the only case.



Rep: (1147)
* savagemessiahzine.comoops,

Quote from the cap:Not recommended for use in conjunction with other tweaks.

Thank you for your appreciation of my FDE. Ready to challenge some of your words.
For example about rm / dev / log / main. All is good, but some applications very carefully want to write to the system log when svoe..i not find kuda..to still trying to do so indefinitely ... impeding the OS to fall into hibernation. Used another method off the log. Node as it is, but it does not work.
Init.d cleared for blaga..vsyakoe there byvaet..i can subsequently lead to conflicts or even okirpichivaniyu device.
thermald.Conf modifitsirovannyy..naoborot aims to increase proizvoditelnost..i he did not navyazyvaetsya..a replaces suschestvuyuschiy..esli it is ... there is no way.
At the expense of a media server will popravki..chtoby above 4.4 is not touched.
GPS tweaks not only for mediatek..a inclusive. For all.
All tweaks are applied only once when the telefona..vse tuning .. and their work at the time of the phone is not nuzhna..vse raz..pri every system startup.
Pro configuration tweaks, too, is written in the header ... it's from the category - set and forget. ... all done automatically for each phone individually adjusted.
hosts file is updated as FDE updates. No unnecessary network connections.
Support init.d not always neobhodima..v depending on the model telefona..na each firmware version of your avtozapuska..FDE automatically chooses the best. Through Init.d last.
Busybox sterricsson latest version. Other versions may simply not work in the absence of various applets. But take away the compulsory registration in the trail. assembly. All the same, it will be in the / system / engine.
About 2G..ne znayu..ne faced chtoto..vozmozhno your firmware is somehow tied to the regime energosberezheniya..kotory activates FDE.
And I do not know how there Pacman, but on all the cyanogenic and most of his brats user mode works flawlessly.

About init.d, I will think how to solve the issue with other scripts.) Thank you.

tyts, toot.

Post has been editedferavolt - 12.03.16, 10:50



Rep: (299)
By the way, on my phone (lenovo a1000) init.d was not at all to the application of FDE. Can anything else used?



Rep: (1147)
The new beta version.

FDE-v0.20-beta2.
What is new since beta1:
- No automatic cut logging in Android
- Fixed battery calibration logic
- Fixed tweak GPS
- Fixes for mediaserver
- Corrections related to busybox / toybox
- Improved VM tweaks
- Triple buffering for older versions of the OS.
- Corrections MinFree fix for devices with small memory volume
- Other ..

Write about their experiences)
Do not forget about the file FDE.txt
Thank)

Attached fileFeraDroid-Engine-v0.20-beta2.zip(1.46 MB)



Rep: (193)
* feravolt
Heaven and Earth) has ceased to slow ... especially noticeable when you come into the settings .. Applications! I check. For a fraction of a second re-opens in the 9th Bat.
And like multitasking I came alive again! Earlier tin was .... TEST more)

Attached files

Attached fileFDE.zip(1.91 KB)



Rep: (4425)
* feravolt
In the games a little retarding, and set off, running cheerful than in previous versions.
Attached fileFDE.txt(14.8 KB)



Rep: (48)
On MStar M1Pro put FDE-v0.20-beta2. Responsiveness smarta actually better at this assembly. But the Internet after the download starts in 2G mode - handles surfing, and it seems the Internet has become more brakes.



Rep: (1147)
Frost41 @ 14.03.2016, 21:29*
[Attachment = "7756641: Screenshot_2016-03-15-10-33-45.png"]
Say ka me such a thing! There touchscreen calibration program on the idea after the patch the entire interface is lost in it! Only a white screen. The program helps a bit with tachem. The same trouble with other similar programs.
For this firmware I reinstalled today .. In another mod sin) which can be school !?

Try to remove 006 ***. Sh from the folder / system / engine / gears

Posted on 18/03/2016, 11:44:

Alexander @ 03/18/2016, 2:17*
On MStar M1Pro put FDE-v0.20-beta2. Responsiveness smarta actually better at this assembly. But the Internet after the download starts in 2G mode - handles surfing, and it seems the Internet has become more brakes.

Thanks for the tip .. May be able to show the difference of the results is a screenshot of the tests?



Rep: (193)
Try to remove 006 ***. Sh from the folder / system / engine / gears

I tried until zero effect. I do not understand what can affect the graphical interface. And only in the calibration program ....

Post has been editedFrost41 - 18.03.16, 16:23



Rep: (1147)
Frost41 @ 18.03.2016, 15:22*
Try to remove 006 ***. Sh from the folder / system / engine / gears

I tried until zero effect. I do not understand what can affect the graphical interface. And only in the calibration program ....


Hopefully I rebooted after removal? Other options too, I can not yet offer ..
Can your FDE.txt?

Post has been editedferavolt - 18.03.16, 17:39



Rep: (193)
* feravolt
Tried uninstaller fde sew ... Reboots ... Where general mechanism m stitch settings can be based?
Or is it in inzhenerki?
Attached fileFDE.txt(5.78 KB)



Rep: (1147)
FeraDroid Engine v0.20-beta3

Threw his hat in the new beta ... What's new after beta2:
- Added support for automatic ochiske application cache
- Increased the time to wait before starting the FDE, so as not to overload the operating system at startup
- Updated blocker advertising before 25/03/16. Oblegchen..chtoby not slow Internet.
- more adaptive parameters for the kernel
- Improved battery tweak
- Arzivchik became even less - 1MB
- bug fixes and other small ..

Testim..otpisvaemsya ..
Thank)



Rep: (4425)
Subjectively was even better, but still when scrolling in a browser, games, lowering the curtain slightly retarding, can still tweak the kernel parameters for smoother performance ?!
Attached fileFDE.txt(331.04 KB)


P.s. I will add: I've found probably got used)) by the end of the day do not see any slowdown, all smoothly yak May butts)))

Post has been editedctas8888 - 26.03.16, 21:10



Rep: (1147)
ctas8888, your log - the meat. Manually uninstall it, reboot the device and attach the newly obtained log.



Rep: (4425)
feravolt @ 27.03.2016, 10:16*
Attach the newly obtained log.

Attached fileFDE.txt(13.99 KB)
Attached fileScreenshots.zip(484.68 KB)
Attached fileinstall recovery.zip(440 bytes)
Attached fileFDE.txt(5.94 KB)


Post has been editedctas8888 - 28.03.16, 11:49


Full version    

Help     rules

Time is now: 01/05/20, 17:14