TP-Link Archer c20 - Discussion | [wifirouter]



Rep: (3400)
TP-Link Archer C20 - Discussion


A photo:
Attached Image

Attached Image

Description:
The Archer C20 supports the next generation of 802.11ac wireless, making it the ideal solution for speeding up your home network and solving channel congestion.
Specifications:
Interface 4 LAN ports 10/100 Mbps
1 10/100 Mbps WAN port
1 USB 2.0 port
Buttons WPS / Reset Button
Wireless on / off button (wireless on / off)
Power On / Off Button
Antenna 2 dual band antennas
External power supply 12 V DC / 1.5 A
Dimensions (WxLxH) 230 x 144 x 35 mm
PARAMETERS OF WIRELESS MODULE
IEEE 802.11ac / n / a 5 GHz wireless networking standards
IEEE 802.11n / g / b 2.4 GHz
Frequency range (receive and transmit) 2400-2483.5 MHz
5150-5350 MHz
5650-5725 MHz
5 GHz transmission speed: up to 433 Mbps
2.4 GHz: up to 300 Mbps
Sensitivity (reception) 5 GHz пјљ
11a 6 Mbit / s -91 dBm
11a 54 Mbps: -74 dBm
11ac HT20: -66 dBm
11ac HT40: -64 dBm
11ac HT80: -61 dBm
11n HT20: -71 dBm
11n HT40: -69 dBm
2.4 GHz
11g 54M: -76 dBm
11n HT20: -74 dBm
11n HT40: -71 dBm
Wireless functions Enable / disable wireless broadcast, WDS bridge, WMM, wireless connection statistics
Wireless Security Encryption Modes: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK
EIRP Transmitter Power (Wireless Signal Power):
<20 dBm or<100 mW
Useful links:


There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links, or through QMS.

Post has been editedferhad.necef - 24.10.19, 08:52
Reason for editing: How to change the dump proshiki MAC address on your



Rep: (1)
the firmware on the router renew the March '16, I also have a network of fell off every 15 minutes, if the modem is in the Stick it translate only modem mode, I first use MTS 824f was Stick translated into only mode modem network fell off, alter in hilink network dumps ran out and on hilink insertion rate is higher than the stick, look at a branch of your modem how to alter or aT commands only mode modem is to stick firmware command does not support hilink aT, now I use a modem MTS 827f (E3372s) pereshito in hilink connected without any configuration works sou dipper in conjunction Tp link Archer C20 + 827s MTS MTS Unlimited Internet bezlimitesche, Tele 2 infinitely black, XXL from Rostelecom, write if more than help
egoist.87 @ 14.05.2017, 15:04*
I was already tortured with this router. The laptop periodically loses the network 5-7 times a day. With a telephone of norms, before that there was another router, everything was fine. I was already tortured. 5 GHz generally cuts speed. What can I do?



Rep: (4)
I will try, but I'm through the optics, not the router using a sim card.



Rep: (17)
I bought this router. The description of all stated that there 100 megabit network ports, which is rather strange, considering that the wifi high speed. The box at the same time, it is written that there Gigabit ports. What to believe? How can I check that there really? v1 version of me.
And in the application for android is a "cloud my device." Google says that it is for the remote router management. But I did not find how to add it, it works at all?

Post has been editedBebenin - 16.05.17, 14:43



Rep: (6)
* Bebenin , We are sorry, but about what mob.prilozhenie you talking about? As of. Tether Applications no "cloud my device"?

Post has been editedartom43800 - 25.05.17, 21:00



Rep: (17)
* artom43800 If you create there uchetku will appear. Saporta TP link I said on this occasion something like - "We have it added to the app, but it does not work as long as when the thread will do.". The type of this function is only in the development stage, there is no function, but to push into the interface we've come up with. But that's why it then give users?) Make up to the end and activate.
Attached Image


Post has been editedBebenin - 25.05.17, 22:08



Rep: (33)
Bebenin @ 16.05.17, 14:39*
The box at the same time, it is written that there Gigabit ports.

he does not have gigabit ports.



Rep: (5)
Maybe someone will need
List 3G / 4G compatible modems

official firmware revision V1

Beta version of 02.09.2017. NOTE: Only for revision V1
list of supported (tested) 3G / 4G mopeds
Megafon: M150-1, M100-1, M100-4 (E3272), E1820, E367u-2, E352.
YOTA: WLTUBA-107 LTE Cat.3, Wi-Fi Modem LTE Cat.3, Wi-Fi Modem LTE Cat.4
Beeline: MF180, MF823D, E3370
MTS: 822FT (E3276s-210), 8211F (E8372), MF192
TELE2: MF823D


official firmware revision V2
no data
official firmware revision V4

bin-file Moped MTS 829F (Huawei E3372h)

how to set the bin-file


Post has been editedmaltzev - 25.05.17, 23:23



Rep: (6)
REX9895 @ 11.05.17, 12:35*
Not embroidered 3370 and he's patched receiver in the 3372 work

Huawei 3370 is stable, does not fall off in the 4G network?



Rep: (26)
* Night night ,
Works great
Reflash that have worked whit - yotovsky modem constantly hung

Post has been editedREX9895 - 01.06.17, 18:03



Rep: (3)
dampfer @ 26.04.17, 14:11*
TP-Link Archer C20 v1 OpenWRT v15.05
I do not try, who have the fortitude to try - do not be lazy and unsubscribe


I tried to Archer C20 v1. packages not swing swear by sergment .. the problem is not resolved ..
2.4 wifi did not work did not start at all, just 5ghz, and Lucy, too, there was not ...

in general, I decided to beg back on and got tplinkovskuyubrick !!!
with the inclusion of all the light faded out of Leda and un undistinguished and through tftp shitsya nehochet ..

fuulflesh need, who can share? or it may have another solution?



Rep: (1)
Can someone tell me. When approaching the tplinkwifi.info settings, 192.168.0.1, 192.168.1.1 - all 403 Forbidden.
The router is connected to noutu naprmuyu and distributes vayfay for tablets / phones.



Rep: (444)
* Night night
The question of the branch of philosophy - and maybe .....
Take an active hub and check.



Rep: (444)
* Night night
A TP-Link will tell you about, too.



Rep: (1)
How to make friends with him Huawei e3531 (MegaFon m21-4)? The first version of the router. Latest firmware. Other modems e173 and MegaFon m100-4 work. But the need is e3531.

Post has been editedKreshdiz - 17.06.17, 22:23



Rep: (1)
M100-4 periodically falls off due to lack of power, and through extender generally not detected. With e173 everything is OK. But it speed is slow by definition. But e3531 speed and consumes little energy. Since it has to be perfect, but tp link can not make friends with him.



Rep: (6)
KreshDiz @ 17.06.17, 22:27*
M100-4

We tried to translate in 3G mode only? Availability of 4G for you probably is not critical if you want to connect the e3531.



Rep: (1)
* Night night e3531 without 4G.



Rep: (6)
* KreshDiz,
I know he brought as a comparison. M100-4 only in 3G mode is transferred to a stable job?



Rep: (1)
* Night night
not. I not tried. I try to accomplish your goal. 4d but no cover. it is unlikely that will change



Rep: (6)
KreshDiz @ 20.06.17, 23:19*
4g cover no

The only mode 3G modem in less energy consumption, suddenly work.


Full version    

Help     rules

Time is now: 14/03/20, 7:32