> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Lenovo A1000 - Firmware



Rep: (171)
Lenovo A1000 - Firmware
PictureLenovo A1000
Description | Discussion пїЅ | Discussion A1000m пїЅ | games and apps пїЅ | Modifications and decorations пїЅ | Firmware пїЅ | Lenovo A1000 - Marriage and Repair

Important information!
ATTENTION!!!The device has 2 different revisions!
Experienced by trial, error and bricks, it was found that starting approximatelysince the fall of 2016, and already 100% from the winter and beyond 2016 \ 2017 sold devices began to go with a new revision of the screen and \ or touchscreen . It was found out because of one of the users, and then an avalanche of many at once, when flashing any "of old" TWRP, laid out until April 22, 2017 (and new ones are posted in this post ), as well as any custom and stock firmware, except for 30666, there was an artifact in the form of a screen with color stripes and ripples. There was nothing or almost nothing on such screens. Only the drain firmware saved 30666 in the form of a packfile with lenovo-forums.ru . You can read this fascinating thriller (and even for those who have a completely new device) here: Lenovo A1000 - Firmwares (Fasting RZcT # 57917459) Through logical conclusions and experiments it was established that this firmware is 30666, and only it is universal for all revisions. And the firmware below it is suitable only for older devices made before the time specified above. The bottom line is that, starting from 30666, the manufacturer slightly tweaked the new core so that on any revision and any firmware there were no bars on the screen.

In short, the problem with TVRP is solved, new TVRP, suitable for ALL revisions, hang in the cap, no one else will be in the TVRP anymore. As for the possibility of flashing old firmware on the devices of new revisions, it is not so simple, although it is not at all difficult. Read the spoiler "Firmware "--> Lenovo A1000 - Firmwares (Post nemo-nemo # 60718911) .

About the needimmediatelymake a full TWRP backup
This appeal is tofor beginners Topics. If you have recently logged in, and \ or have not done a full TWRP backup yet, then you should take on trust that immediate creation of a full TWRP backup - action, absolutely necessary for you, if you are going to do ANY more or less serious manipulations with the device. The experience of numerous participants in the topic who did not do this, as well as their subsequent torment with IMEI recovery suggests that TWRP backup solves the vast majority of any problems, including turning the device and damage IMEI. It is often impossible even for the radical method of flashing to restore IMEI - with the help of the program Research Download - and your own TWRP backup can ALWAYS do it. Do not put yourself at risk, going to the service center, to waste and nerves - do not be lazy, and immediately after reading these lines make a full TWRP backup immediately ! How to do this - look here in this detailed post: Lenovo A1000 - Firmwares (Post nemo-nemo # 57420760)

Differences A1000 from A1000m
The main, that is, significant, differences in the apparatus consist of two things:

HaveA1000 : RAM 1 GB , internal - 8 GB
HaveA1000 m : RAM 512 MB , internal - 4 GB

HaveA1000 loader NOT blocked by
HaveA1000m loader blocked by

Other characteristicsA1000m can be viewed on the Internet.

Update your phone with ROOT rights


Drivers and Utilities
USB Driver - install in any case. Another link, if the previous problem: - Alcatel OneTouch Pixi First - Firmwares (Fast nemo-nemo # 50204588)
ADB Driver- it is installed only on the working, switched on device with debugging set via USB.

Who will have problems with the above drivers (it sometimes happens), you can take these -Alcatel OneTouch Pixi First - Firmwares (Fast nemo-nemo # 50204588)

Program Download Research Download driver - versions 2.10.1001 and 4.0.0001

Firmware
How to flash the “old” firmware on the new revision device
Who after the firmware "old" (before 30666 ) firmware there is a white \ striped \ strange screen, we read this - Lenovo A1000 - Firmware (Post tocaunt # 45775296) - and then this: Lenovo A1000 - Firmwares (Post nemo-nemo # 60718911)

Official firmware A1000

To date, to recover the device available, there are three firmware: a clean sink 30666, and two by me (curator) of the official 30666:

1) Official stock firmware 30666 as .ras file : https://cloud.mail.ru/public/55xf/5HNd13EwE

2) Stock firmware 30666 as .zip -arhiva to flash through TVRP : Lenovo A1000 - Firmware (Post nemo-nemo # 57223503)

3) Modified firmware 30666 as .ras -file for the program Research Download With integrated TVRP and other minor changes: Lenovo A1000 - Firmware (Post nemo-nemo # 56898589)

4) Official stock firmware 30268 which can be downloaded from this post - Lenovo A1000 - Firmware (post redlys # 101798893) - And at the same time, and some useful information on the restoration of the device is from it.

If you keep any stock firmware in the form of.ras -file, and you are willing to share them, according to a personal supervisor.
Modifications of stock firmware
Custom firmware


Instructions
How to flash the “old” firmware on the new revision device so that there are no color bars on the screen
Be sure to read the owners of devices produced not earlier than the autumn-winter of 2016 and later: Lenovo A1000 - Firmwares (Post nemo-nemo # 60718911)

If the old firmware (up to 30666), or any of the “old” TVRPs are flashed onto the “new” device, there will be color bars on the screen. Therefore, we read and do.

Instructions for firmware via PC
General view of the firmware manual:
  • Disable antivirus and driver digital signature verification. Connect the USB cable only to the motherboard - that is, behind the PC, preferably to USB2 .0
  • Install all drivers from the header
  • Run as program administratorResearchDownload.exe (it can be downloaded in the header, section "Drivers and Utilities")
  • Click the settings button ("gear") and select the firmware file (view name A1000_USR_S29576_1510212227_SPRD7731_ROW.pac) - from here:Lenovo A1000 - Firmware (Post tocaunt # 45775296)
  • After unpacking the firmware, you will see the name of the firmware to the right of the buttons.
  • Click the "start" button ("Play" button, triangle) to start downloading the firmware
  • If a warning box about something pops up - click "Yes", "Yes", "OK", within the meaning
  • Turn off the smartphone, remove and insert the battery, hold down the Volume_Up button, and while holding it, connect the USB cable to the smartphone
  • As soon as the blue stripes run in the window (that is, the firmware starts), release the volume button
  • At the end of the process you will see the messagePassed or Success
  • Be sure to press the "stop" button (square) in order to close the program
  • Remove the cord from the smartphone, remove and insert the battery, turn on the smartphone
Detailed instructions for firmware (raskirpichivaniyu) via PC

Driver installation
  • Downloaddriver
  • Unzip the folder without spaces and national letters in the path to the unpacked files
  • Depending on the bitness of your OS, run as administrator 32install.exe or 64install.exe
  • Restart computer

UNIVERSAL instruction for splicing the device
Unconditional entrance tofastboot(with the system flown and recovery)
Two errors of the Research Download program and methods of their elimination- in addition to the instructions for splitting
Methods for installing TWRP recovery without first obtaining root-rights
TWRP recovery installation method with root-rights
Creating a FULL TWRP Backup and Restoring It
Information about IMEI, instructions for its restoration, about the importance of the FULL TWRP backup
Instruction-2 for the restoration of IMEI, the general post (not yet verified, but who has nothing to lose .....) ---- Direct link to the user manual
Disable logging (deletes a non-fading and swollen folder / external_sd / slog)
Overclocking the processor and setting the performance mode forever
Another instruction for overclocking and automatic control of processor frequencies
Rollback to stock firmware from Lenovo A1000m firmware
The problem of "color and striped" screen after installing old firmware on devices recently purchasedStill:General conclusion
Spreadtrum sc7731 internal memory markup
How to register your IMEI on Android 6.0 firmware
Solving the problem of "blinking screen" when the display module replacement

Modifications and patches
Recovery
TWRP 3.2.2
TWRP 3.2.2 underOptistock 5.1
TWRP 3.2.1

Universal TWRP - suitable for devices of all revisions
Old TWRP - for devices with the first revision

These TVRPs are generally better not to flash if you are not sure that your device was manufactured in the first half of 2016 or earlier! If you are sure or know for sure - you can flash.

Stock Recovery and TWRP 2.8.7.0
TWRP 2.8.7.0 with Lollipop Theme
TWRP 3.0.2.0 - with MTP function
TWRP 3.0.3.0 with support for the official TWRP App - pre-release version, there is a bug with reboot recovery
TWRP 3.0.3.0 - from source, seamless, with additional options- recommended for TWRP installation
TWRP 3.1.0-0- c "proprietary" inscription "Lenovo A1000", recommended for installing TWRP

Reset to factory (wipe data) on the Chinese recovery

How to enter Recovery
Instructions for any recovery
1) Turn off the phone
2) Press the buttons simultaneouslyON + GRMK_VNIZ
3) Almost immediately after that, that is, literally in a second, without releasing the previous two, hold down the third button -GRMK_UPPERH
4) Keep all three buttons until the stock recovery appears, or until the TWRP logo appears (if the recovery is TWRP)
5) release the buttons

Instructions for TWRP
1) Turn off the phone
2) Press the buttons simultaneouslyON + GRMK_VNIZ wait for the beginning and end of a rather long vibration
3) At the end of the vibration, release the buttons and wait for TWRP to enter


Root
Get root through Custom Recovery + TWRP + Cyanogen-Recovery
Instructions for obtaining root rights, custom recovery and flashing the phone without a PC
InstallationSuperSU (getting root-rights) via TWRP
Another way
Magisk SU (SuperSU Alternative) NEW

The method of obtaining ROOT by the recovery itself TWRP 3.0.2.0
For those who have flashed (or will be stitching)pac file with firmware 30318 or 30666 (built into them TWRP 3.0.2.0 ), as well as for those who installed (or will install) zip firmwares 30318 or 30666 via TWRP 3.0.2.0 . The fact is that TWRP 3.0.2.0 has the property that itself is able to install (and kindly offers to install) the program SU-Installer , which, in turn, can automatically install root-rights itself! Details here: Lenovo A1000 - Firmwares (Post nemo-nemo # 56778380) (paragraph 4 )


miscellanea


Topics Curator - nemo-nemo

Post has been editednemo-nemo - 26.11.20, 18:51
Reason for editing: reference to office. Firmware 30268.



Rep: (3)
tigr1234566 @ 15.06.18, 18:25*
Frame with optistoka

The link does not open



Rep: (44)
People urgently need APK Bkuetooth from all ports on the 6.0 with libami
It is advisable to pack all in different archives



Rep: (1316)
Unconditional entrance to fastboot (with the system flown and recovery)


I found interesting thing - how to get infastboot If sleteli system and recovery . It is known that on our device with buttons in FastBoot it is impossible. This means that if the system and recovery are not available, the fastbut is not available. However, this, as it turned out, is not so - you can get to the fastbut, and therefore, when driving the system and recovery and the presence of a twerp-backup on the cards of memory, it is no longer necessary to sew the reservoir (.Sras file). That is, entering the fastbut, you can flash the TVP, and from it to restore the backup, or flash Zip. So, the method itself (I ask you to take into account that I have Linux, and in Windows I can look differently):

1) completely off apparatus (battery distort).
2) Open Terminal, type in itadb reboot bootloader - HO ENTER until you press !!
3) Open "Device Manager", and in any case the "My Computer" - where appear when you insert the flash drive. (To Linux - a filemanager window).
4) Prepare and monitor closely the window "Device Manager."
5) Insert the cord into the unit is turned off, wait and see.Once in the "Device Manager", it will appear " Android "And then immediately to" My Computer "- device" lenovo Suit "(Marked with" CD ") - push in the terminal Enter . Hurry is not necessary, there should be two devices, but also can not procrastinate - 10-15 seconds they disappear from the manager.
6) The device will reboot infastboot . Farther fastboot flash recovery twrp.img , Reboot in TVRP, and there is already a MTP, the adb, you can sew and repair anything.

Post has been editednemo-nemo - 16.06.18, 12:19
Reason for editing: placed in a hat



Rep: (105)
What did not?
Attached Image



Rep: (1316)
* Den_Switch,

Here you can see -Lenovo A1000 - Firmwares (Post nemo-nemo # 55345639). If you do not come out, it is possible to flash .ras file with TVRP clean.
And it has something to do with checking the entrance to fastbut? Turned fastbut log in or not? If happened, why sew TVRP pak file?



Rep: (19)
* Den_Switch,
LoLrD @ 27.03.17, 07:55 *
To go back to the sink, it is necessary to Resorche go to "two gears" on the tab "Backup", and at the very bottom of the page, in the subfield "File Backup", remove the three check mark from the IMEI, NV, Prod_NV - and then stitching 5.0 .


Attached images
Attached Image



Rep: (105)
* Martun07 Already I decided. It was not written that it is necessary to remove PhaseCheck

* nemo-nemo It works if there is no system. Need to wait on the label Lenovo 20-30 seconds, and then runs

Post has been editednemo-nemo - 16.06.18, 12:21



Rep: (105)
[6.0.1] Resurrection Remix MM v5.7.4

A warning!
I am not responsible for the broken machines, bricks, etc.

Information
-Osnova firmware: CyanogenMod, AOKP.
-Version OS: 6.0.1 (Marshmallow)
-Deodeksirovana
-Stable (v.5.7.4 Alpha)
Area For the core: 3.10.65+
-Support language: Multilingual

Note: Device Model - SM-G360H.
Firmware from here
link providedTimoshka24

Features
-Plavnaya and stable operation
-Osnova Android 6.0.1 Marshmallow CM13.1
-Android 6.0.1 SystemUI
-Launcher of CyanogenMod 13
-CM13 Theme Engine
-Added: "Double-click on the status bar to sleep", "Information about the operator," "Customization hours", "Selecting a location hours in the status bar", "Customization battery icon", "speed monitoring", "Background and color status bar "," Weather in status bar "," Animation Listview "" Gestures "," Cleaning the notification in one click ", includes all the CM13 features, and much more ...

Changes
-Wi-Fi corrected.
A point fixed access.
-Bluetooth corrected.See spoiler "Bugs"
Cam corrected.
-Naushniki corrected.
-GPS corrected.
-Internal memory is fixed.
A-problem bootloop-th corrected.
-Patch "Marshmallow to Lollipop" corrected.
-Offlayn charging fixed.Not confirmed, it comes in rekaveri.
-Rut access fixed.
-Etc.

Bugs
It does not work the second SIM card.
(And still Bluetooth, can only be me, does not see the devices, and other devices it also did not see).

Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

Installation Procedure
1. Clear Data, Cache, System, Dalvik / ART Cache.
2. Sew the files in order:
1. ResurrectionRemix_MM_v5.7.4_SM-G360H_ADVAN_S4P-TX.zip
2. RRemix_ [MM] _Converator_For_A1000.zip
3.4. Both fixation (camera and Wi-Fi)
5 (optional). Gapps

Download


Post has been editedDen_Switch - 05.04.20, 14:46
Reason for editing: Link to Google Drive was dead



Rep: (6)
* Den_Switch , This is the new firmware? Why can not such as to collect all these files into a single, and download? It is necessary for one to download and sew. It is conceived?



Rep: (105)
* ARTEM DJUMANOV New. Files into one do not want to collect. If someone wants overwrite update-script, and vpihnot all files into one.



Rep: (191)
* Den_Switch , The second Simcoe also learned Fix



Rep: (105)
* Dogfree123 So I'm not the author of the firmware) of the said fact, from firmware



Rep: (7)
Where to take fonts?
Attached Image



Rep: (334)
* bra3and , Folder System / Fonts



Rep: (135)
* Den_Switch , Hmm and where there are bottles?

Posted on 16/06/2018, 21:36:

* Den_Switch , Even I wrote that I threw the link)



Rep: (105)
* Timoshka24 In the archive Convertator
Sorry, I forgot to point out.

Post has been editedDen_Switch - 16.06.18, 21:42



Rep: (135)
* Den_Switch , what?



Rep: (19)
Today managed to make the drain firmware from Nomi i503 kernel on 03/10/65. While there is a lot of bugs.

Attached images
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Post has been editedMartun07 - 17.06.18, 00:51



Rep: (7)
* Iddqd228
What to throw to rub.pisal instead of characters?



Rep: (334)
* bra3and , From not in fonts case and in the application. Try sign through APK Editor


Full version    

Help     rules

Now: 20.12.20, 21:48