Lenovo A1000 - Firmware
SIM4KA @ 11/21/2016, 01:53
bars6 , there they are similar as in LOS, I tried to set the settings from the LOSP finals and the final1 it still gives an error, figs knows why: unsure:Post has been editedbars6 - 21.11.16, 01:01
bars6 no, I'm not only the last update took, but also Los NEW, too, and there is no change setpother, Karoch Posted on 11/21/2016, 01:04:
Lolrd , you can throw off the patch so that there are settings from LOS) on the drain)Help that with the phone gives out this error. I can not understand, it does not sew. Lenovo A1000m telephone.
Post has been editedGeneralgrant - 21.11.16, 11:12
 |
Post has been editedGeneralgrant - 21.11.16, 11:12
Reason for editing: Images under spoiler
Vyacheslav 87072021252 , I had it there was an iz no driver, once again put them, if it does not help, then try the USB to change (the phone will insert into another socket with two clamps of the volume buttons)Vyacheslav 87072021252 @ 11/21/2016, 06:35
This is such a mistake
If all (!) Drivers you installed, then in the "two gear" on the backups tabtake off three ticks at the bottom of the window, where File Backup , Click OK - and sew.
P.S. Spicy images under the spoiler -Working with Images on the forum (Post Sil-Silent # 13963819)
Post has been editednemo-nemo - 21.11.16, 09:21
Hello! Who has long been in this topic, what firmware is the most optimal, not buggy (custom). Please share your impressions.
I have already tried everything but returned to the optiscus, there is not something extra, the battery is good, the apersives are normal and no glitches ••• naked stock
Post has been editedbars6 - 22.11.16, 09:58
 |
Post has been editedbars6 - 22.11.16, 09:58
Two mistakesprogramsResearch Downloadand their elimination methods
In addition to "Instructions for emptying".
The most running mistakes that give the programResearch Download - this _Bkf_prodnv__failed. (it is actually and _BKF_NW_W. ) and Checking Baudrate. . Others, honestly, I have not yet met on our device, nor on it like him Alcatel 4024d. For without a small year of working with him. In general, the Research Download program is extremely unpretentious, not capricious and does not make mistakes, such as a gady SP Flashtool for MTC. Yes, and the above errors are usually easily solved. So...
_Bkf_prodnv__failed (_bkf_nw_w)
This error is associated with some kind of NV logging, because of which Research refuses to sew:
The problem is solved as follows. In Reserche, click the "Stop" button (square). Remove the cord from smart, pull out the battery. Next, click on the round "two gear" button, in the window that opens, go to the tabBackup And at the bottom, in the section File Backup take off All three ticks:
After that clickOK , insert the battery and sew. Errors should not be more. True, then possibly There will be problems with IMEI and radio, but the phone is at least shock.
Picture
 |
The problem is solved as follows. In Reserche, click the "Stop" button (square). Remove the cord from smart, pull out the battery. Next, click on the round "two gear" button, in the window that opens, go to the tabBackup And at the bottom, in the section File Backup take off All three ticks:
Picture
 |
After that clickOK , insert the battery and sew. Errors should not be more. True, then possibly There will be problems with IMEI and radio, but the phone is at least shock.
Checking Baudrate.
This error appears at the very beginning of the firmware, and means some problems with the firmware port:
Opposite the words "Checking Bauraate "In the same field an inscription appears Waiting ... And the firmware does not go further, you may not even wait more than 10 seconds, nothing will be. You need to try the following:
1) Check if all drivers are installed, and if that, re-install them,everything .
2) If the error does not disappear, make sure that the USB cord is inserted directly into the computer's motherboard, that is, behind the system unit, and not in front and not any other USB connectors (for example on the keyboard). Also, try different connectors from behind the system unit.
3) Use the latest current work version.Research Download .
4) In the main window of the program (MAIN Page) at the top Look in the windowBaudrate. - There must be a default value 460800 - Check out, suddenly you accidentally changed it to another.
5) If you fell into a BIOS of a computer and changed something, better return all the default settings - so reliable.
6) it is better to use a USB connector2.0 than 3.0, so also reliable.
7) and general remark - all manipulations are best done on Windows7 , 32bit , then minimizing problems is guaranteed.
Picture
 |
Opposite the words "Checking Bauraate "In the same field an inscription appears Waiting ... And the firmware does not go further, you may not even wait more than 10 seconds, nothing will be. You need to try the following:
1) Check if all drivers are installed, and if that, re-install them,everything .
2) If the error does not disappear, make sure that the USB cord is inserted directly into the computer's motherboard, that is, behind the system unit, and not in front and not any other USB connectors (for example on the keyboard). Also, try different connectors from behind the system unit.
3) Use the latest current work version.Research Download .
4) In the main window of the program (MAIN Page) at the top Look in the windowBaudrate. - There must be a default value 460800 - Check out, suddenly you accidentally changed it to another.
5) If you fell into a BIOS of a computer and changed something, better return all the default settings - so reliable.
6) it is better to use a USB connector2.0 than 3.0, so also reliable.
7) and general remark - all manipulations are best done on Windows7 , 32bit , then minimizing problems is guaranteed.
Post has been editednemo-nemo - 25.06.17, 19:29
Reason for editing: raised in the topic header
Pixivod @ 11/22/2016, 11:28
Checking Baudrate appears if the speed has changed.
Thanks for the addition, made in the post. Although usually this is not the case. For example, I tried to sew a 4024D android to the breath of 4024D - this error occurred, I changed Baudrate for anything - in any way. Alive only the change of the version of the resorcha from 9005 to 9016, only then the process went.
NEMO-NEMO @ 11/22/2016, 15:53
3) Use the latest version of Research Download - namely V2.9.9016 at the moment.
At the moment there is already such -Researchdownload_r2.10.1001_p1 ... :) Or maybe even eat more ...
maubi, Perhaps, but did not try. I will correct on the "latest guaranteed working") as I try - I will fix it on your 2.10) But the device according to the current standards is already old, so that 2.9.9016 is enough with his head, it even on the 4024D alkatell 5th android sewn, although 9005 refused - and With a Checking Baudrate error.
Detox2001, Hi, I was advised by Laosp, as a stable unpretentious. Why do you want to change to the ZTE port?
Pplus , Xposed and xhalofloatingwindow module will not suit it?
Post has been editedInternetMC - 23.11.16, 19:30
Reason for editing: specify the name of the
Pplus , tyts as an option to continue not be lazy to google©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement