> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Lenovo A1000 - Firmware



Rep: (171)
Lenovo A1000 - Firmware
PictureLenovo A1000
Description | Discussion пїЅ | Discussion A1000m пїЅ | games and apps пїЅ | Modifications and decorations пїЅ | Firmware пїЅ | Lenovo A1000 - Marriage and Repair

Important information!
ATTENTION!!!The device has 2 different revisions!
Experienced by trial, error and bricks, it was found that starting approximatelysince the fall of 2016, and already 100% from the winter and beyond 2016 \ 2017 sold devices began to go with a new revision of the screen and \ or touchscreen . It was found out because of one of the users, and then an avalanche of many at once, when flashing any "of old" TWRP, laid out until April 22, 2017 (and new ones are posted in this post ), as well as any custom and stock firmware, except for 30666, there was an artifact in the form of a screen with color stripes and ripples. There was nothing or almost nothing on such screens. Only the drain firmware saved 30666 in the form of a packfile with lenovo-forums.ru . You can read this fascinating thriller (and even for those who have a completely new device) here: Lenovo A1000 - Firmwares (Fasting RZcT # 57917459) Through logical conclusions and experiments it was established that this firmware is 30666, and only it is universal for all revisions. And the firmware below it is suitable only for older devices made before the time specified above. The bottom line is that, starting from 30666, the manufacturer slightly tweaked the new core so that on any revision and any firmware there were no bars on the screen.

In short, the problem with TVRP is solved, new TVRP, suitable for ALL revisions, hang in the cap, no one else will be in the TVRP anymore. As for the possibility of flashing old firmware on the devices of new revisions, it is not so simple, although it is not at all difficult. Read the spoiler "Firmware "--> Lenovo A1000 - Firmwares (Post nemo-nemo # 60718911) .

About the needimmediatelymake a full TWRP backup
This appeal is tofor beginners Topics. If you have recently logged in, and \ or have not done a full TWRP backup yet, then you should take on trust that immediate creation of a full TWRP backup - action, absolutely necessary for you, if you are going to do ANY more or less serious manipulations with the device. The experience of numerous participants in the topic who did not do this, as well as their subsequent torment with IMEI recovery suggests that TWRP backup solves the vast majority of any problems, including turning the device and damage IMEI. It is often impossible even for the radical method of flashing to restore IMEI - with the help of the program Research Download - and your own TWRP backup can ALWAYS do it. Do not put yourself at risk, going to the service center, to waste and nerves - do not be lazy, and immediately after reading these lines make a full TWRP backup immediately ! How to do this - look here in this detailed post: Lenovo A1000 - Firmwares (Post nemo-nemo # 57420760)

Differences A1000 from A1000m
The main, that is, significant, differences in the apparatus consist of two things:

HaveA1000 : RAM 1 GB , internal - 8 GB
HaveA1000 m : RAM 512 MB , internal - 4 GB

HaveA1000 loader NOT blocked by
HaveA1000m loader blocked by

Other characteristicsA1000m can be viewed on the Internet.

Update your phone with ROOT rights


Drivers and Utilities
USB Driver - install in any case. Another link, if the previous problem: - Alcatel OneTouch Pixi First - Firmwares (Fast nemo-nemo # 50204588)
ADB Driver- it is installed only on the working, switched on device with debugging set via USB.

Who will have problems with the above drivers (it sometimes happens), you can take these -Alcatel OneTouch Pixi First - Firmwares (Fast nemo-nemo # 50204588)

Program Download Research Download driver - versions 2.10.1001 and 4.0.0001

Firmware
How to flash the “old” firmware on the new revision device
Who after the firmware "old" (before 30666 ) firmware there is a white \ striped \ strange screen, we read this - Lenovo A1000 - Firmware (Post tocaunt # 45775296) - and then this: Lenovo A1000 - Firmwares (Post nemo-nemo # 60718911)

Official firmware A1000
Modifications of stock firmware
Custom firmware


Instructions
How to flash the “old” firmware on the new revision device so that there are no color bars on the screen
Be sure to read the owners of devices produced not earlier than the autumn-winter of 2016 and later: Lenovo A1000 - Firmwares (Post nemo-nemo # 60718911)

If the old firmware (up to 30666), or any of the “old” TVRPs are flashed onto the “new” device, there will be color bars on the screen. Therefore, we read and do.

Instructions for firmware via PC
General view of the firmware manual:
  • Disable antivirus and driver digital signature verification. Connect the USB cable only to the motherboard - that is, behind the PC, preferably to USB2 .0
  • Install all drivers from the header
  • Run as program administratorResearchDownload.exe (it can be downloaded in the header, section "Drivers and Utilities")
  • Click the settings button ("gear") and select the firmware file (view name A1000_USR_S29576_1510212227_SPRD7731_ROW.pac) - from here:Lenovo A1000 - Firmware (Post tocaunt # 45775296)
  • After unpacking the firmware, you will see the name of the firmware to the right of the buttons.
  • Click the "start" button ("Play" button, triangle) to start downloading the firmware
  • If a warning box about something pops up - click "Yes", "Yes", "OK", within the meaning
  • Turn off the smartphone, remove and insert the battery, hold down the Volume_Up button, and while holding it, connect the USB cable to the smartphone
  • As soon as the blue stripes run in the window (that is, the firmware starts), release the volume button
  • At the end of the process you will see the messagePassed or Success
  • Be sure to press the "stop" button (square) in order to close the program
  • Remove the cord from the smartphone, remove and insert the battery, turn on the smartphone
Detailed instructions for firmware (raskirpichivaniyu) via PC

Driver installation
  • Downloaddriver
  • Unzip the folder without spaces and national letters in the path to the unpacked files
  • Depending on the bitness of your OS, run as administrator 32install.exe or 64install.exe
  • Restart computer

UNIVERSAL instruction for splicing the device
Unconditional entrance tofastboot(with the system flown and recovery)
Two errors of the Research Download program and methods of their elimination- in addition to the instructions for splitting
Methods for installing TWRP recovery without first obtaining root-rights
TWRP recovery installation method with root-rights
Creating a FULL TWRP Backup and Restoring It
Information about IMEI, instructions for its restoration, about the importance of the FULL TWRP backup
Instruction-2 for the restoration of IMEI, the general post (not yet verified, but who has nothing to lose .....) ---- Direct link to the user manual
Disable logging (deletes a non-fading and swollen folder / external_sd / slog)
Overclocking the processor and setting the performance mode forever
Another instruction for overclocking and automatic control of processor frequencies
Rollback to stock firmware from Lenovo A1000m firmware
The problem of "color and striped" screen after installing old firmware on devices recently purchasedStill:General conclusion
Spreadtrum sc7731 internal memory markup
How to register your IMEI on Android 6.0 firmware
Solving the problem of "blinking screen" when the display module replacement

Modifications and patches
Recovery
TWRP 3.2.2 NEW
TWRP 3.2.2 underOptistock 5.1
TWRP 3.2.1

Universal TWRP - suitable for devices of all revisions
Old TWRP - for devices with the first revision

These TVRPs are generally better not to flash if you are not sure that your device was manufactured in the first half of 2016 or earlier! If you are sure or know for sure - you can flash.

Stock Recovery and TWRP 2.8.7.0
TWRP 2.8.7.0 with Lollipop Theme
TWRP 3.0.2.0 - with MTP function
TWRP 3.0.3.0 with support for the official TWRP App - pre-release version, there is a bug with reboot recovery
TWRP 3.0.3.0 - from source, seamless, with additional options- recommended for TWRP installation
TWRP 3.1.0-0- c "proprietary" inscription "Lenovo A1000", recommended for installing TWRP

Reset to factory (wipe data) on the Chinese recovery

How to enter Recovery
Instructions for any recovery
1) Turn off the phone
2) Press the buttons simultaneouslyON + GRMK_VNIZ
3) Almost immediately after that, that is, literally in a second, without releasing the previous two, hold down the third button -GRMK_UPPERH
4) Keep all three buttons until the stock recovery appears, or until the TWRP logo appears (if the recovery is TWRP)
5) release the buttons

Instructions for TWRP
1) Turn off the phone
2) Press the buttons simultaneouslyON + GRMK_VNIZ wait for the beginning and end of a rather long vibration
3) At the end of the vibration, release the buttons and wait for TWRP to enter


Root
Get root through Custom Recovery + TWRP + Cyanogen-Recovery
Instructions for obtaining root rights, custom recovery and flashing the phone without a PC
InstallationSuperSU (getting root-rights) via TWRP
Another way
Magisk SU (SuperSU Alternative) NEW

The method of obtaining ROOT by the recovery itself TWRP 3.0.2.0
For those who have flashed (or will be stitching)pac file with firmware 30318 or 30666 (built into them TWRP 3.0.2.0 ), as well as for those who installed (or will install) zip firmwares 30318 or 30666 via TWRP 3.0.2.0 . The fact is that TWRP 3.0.2.0 has the property that itself is able to install (and kindly offers to install) the program SU-Installer , which, in turn, can automatically install root-rights itself! Details here: Lenovo A1000 - Firmwares (Post nemo-nemo # 56778380) (paragraph 4 )


miscellanea


Topics Curator - nemo-nemo

Post has been editednemo-nemo - 24.05.20, 08:44
Reason for editing: It is a brief overview of some of the custom firmware



Rep: (27)
I can not put the root .. I'll try tomorrow with the bb, if it works out - there will be firmware

What's wrong with the root? Yes, no?



Rep: (1)
I bought my wife a gift. I understand that there are no unofficial firmwares yet? I would like to have a naked android on the smartphone. Here are my specific tastes)))



Rep: (171)
* JekaSs1986
You can sew in the firmware.

* tribezone
Unfortunately unfortunately not yet. However, they can already be done



Rep: (0)
Has anyone ever made a root? Give instructions, please.



Rep: (1150)
M
We move to subsectionLenovo



Rep: (0)
* I-iawk
Well, judging by the fact that the people in the discussion write, they did it together with the installation of the firmware, and only so far. Personally, I am afraid of doing this, because Despite the instructions, my old phone after the firmware suffered greatly ...



Rep: (1150)
belozzini
M



Rep: (0)
* snekt @,
Is there any way to somehow attract experienced people to the solution of the issue with getting the root?
I have a few progs that I need to study (there for astronomy: D), but it will not work without a root. I do not know why, but this is the condition of the program ...



Rep: (4)
Hi, the question is, I want to use it to distribute wi-fi through yota, but for this you need to ttl and also change imei, I can handle it, but as I understand it, I will need to reassemble it for this purpose.
p.s. Prozbe answer in lichku



Rep: (171)
* GameCrysis,
So you can handle it? Or you do not know how to do this? Already decide.
The kernel will not need to be rebuilt .. It is enough to stuff su into system / xbin in the firmware, and set write permissions



Rep: (5)
Stop me if I'm wrong, how can there be a firmware under SINGLE if the smart is DUAL SIM ???



Rep: (6)
Guys and through ADB no one tried to flash the recovery?



Rep: (171)
* TPyTEHb73Pyc,
What for? We already have it. Did not try



Rep: (22)
* JekaSs1986
You can sew in the firmware.

Can a little instruction on how to add the root to the firmware and pour it all into the phone? Although the cap has instructions for the firmware. Where to download what root and where to throw the firmware?



Rep: (171)
* Yakapin
Porting firmware 4.2 / 4.4 to MTK 6592/6582



Rep: (103)
By the way, I do not have the Chinese written as written earlier.



Rep: (248)
As for the custom firmware, the problem will be .. since there is no full-fledged recovery on this platform in this, the whole problem ...
How many did not try to start it failed .... there in the kernel of the trap like if I am not mistaken in adf (Atomic Display Framework) and twrp does not support it at all, about the CWM is also a problem, I tried 4-5 recovery assemblies already and did not start CWM but he Bagnuty PPC



Rep: (171)
* Kaco1324,
What is the problem to take the firmware under the flashlight and modify it? It is not necessary to cut mod.proshivki for recovery



Rep: (22)
Here is the menu in the recovery:

reboot system now
apply update from ADB
wipe data / factory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
update from cache
update from external storage
update from internal storage

From all this, 2 points are not clear: boot into the bootloader and ADB. Pogulil - these items should be hidden from the user (bootloader exactly).



Rep: (0)
I enter into the recovery while simultaneously clamping 3 keys: {+ - and on}. If the instructions from the cap, or shows a blue-green red flag, or
foto
Attached Image

I did not find an exit from these modes, only distort the battery.

Post has been editedECO1256 - 24.01.16, 11:55


Full version    

Help     rules

Time is now: 07/08/20, 03:44