[X]Assistant

[dickus]

DiscussionCubot Note S
Cubot Note S
Description | Discussion пїЅ | Purchase пїЅ | Firmware пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory do you have in the machine?
• The results of performance tests of Android devices, see the topic: Benchmark
• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

Photo

Specifications

Screen size:5,5"
Screen resolution (px):720 x 1280
Screen Type:IPS

CPU:MediaTek MT6580 (4-core), max. frequency is 1 300 MHz
RAM (MB):2048
Built-in memory (GB):16

Bluetooth:4.0
Wi-Fi:802.11b, g, n
Communications:2G 2, 3.5G (HSDPA, HSDPA +, HSUPA, HSPA, HSPA +), 3G UMTS / WCDMA, GPS, Support for 2 SIM cards

Camera rear (MP):8
Autofocus:there is
Flash:there is

Accum Capacity (mAh):4 150
Dimensions:77 x 152 x 8.9
Weight (g):163

Reviews and Reviews

Reviews:
Datos Review
Review from oneprog.ru
Cubot Note S Review
Cubot Note S VS Bluboo Maya comparative review.

Reviews:
Mini review unpacking
Battery review byjanjanovich
Screenshots by lawyerbob
Device Review by Dream_Angel
Feedback from letmebetomorrow
Options and her photos from vsf
Review from Owlet13
A small review review of Cubot NOTE S by fffrancuz
Review from Barmaglot Barmaglotovich

FAQ

• How many memory cards are supported by the device?
  64 GB microSD card formatted with FAT32 verified
  
• How to enter Recovery?
  To enter Recovery mode with the device turned off, hold Volume Up + Power. After CUBOT appears, release the power button, hold the volume button until a menu appears.
  
• Are there any common bugs in the device?
  Not everyone can show up, but cases have been noticed:
  - Phantom clicks
  - Uneven display of battery discharge (dips and freezes of the battery charge)
  - The phone heats up in the area of ​​the motherboard at CPU loads and using 3g
  - Intermittent display of GPS navigation
  - The problem of going to sleep (associated with the alert indicator, which is not in Cubot Note S) -Cubot Note S - Discussion (Post by masichka05 # 50070897)

Explanation of the operation of the charger

Useful

Cubot Note S official forum section

Solving the Overlap Detected Problemandanother option
Fix MTP Inoperative
Installation instructions for Viper4 stock firmware
deep dream
A possible solution for those who have a connection, but does not hear or speak when calling from 3g.
solving the problem of not going to sleep
Codecs for MX Player
Charge level calibration
GPS fix
Communication settings in the engineering menu
IMEI repair instructions
Setting up the processor to reduce heat and increase operating time
GPS improvement option

Repair and upgrade

Screen replacement
Treatment of phantom button presses home
Smartphone disassembly
Replacing the dynamics and improving the heat sinkandfeedback on this manual

Accessories

Wireless charger
Protective glass
Flip cover
Another case
Multiple battery options
And a few more covers

K

All issues related to the firmware, please discuss in the subject.Cubot Note S - Firmware.All posts with offtopic deleted without warning.

for filling the caps, contact the section moderators either via the button

Post has been editedolmusi - 26.12.17, 14:21

Reason for editing: Supplement to the information on the imposition of permissions

[Vladimir_Borisovich]

112 Martobr, WB :)

[makumazan1]

Serge1970,Thanks for the clarification, I scribbled the body with firmware V5.0_20160912 for the DL2016 chip. Fee got this, it turns out. It remains only to have to drive, it turned out to be lost. So the precedent has been created - the old screen got married to a new board. This is good, because Cubot taxis, compared with the Samsung J200h and Meizu M6, which had to be dragged instead ...

[marsfm1]

Guys such a problem, Cubot Note S, Androyd 6.0, the phone through the native recovery was reset to the factory settings, then trying to log into the account writes the following: "log in to one of the accounts of the owner of this device." How to deal with it, the phone was in hands alone, 1 account only created on it

[Dr_Hacks]

marsfm1,
Well, come in, problems then. FRP again wrote a hundred times, through the SPFT rub the FRP section.

[ilyapap2007]

Greetings to all.
At one time, the screen was broken, then I ordered another module for Ali, it was successfully sent, but after replacing it does not work (only the backlight and everything), I’m writing to the Chinese that the screen does not work and they send me another module, but after replacing fiasco (lights and all).
As I was told, the drivers do not fit on the display, the firmware was flashed with all the official firmware 5.1,1.1 others do not want to be sewn, flash errors write.
How can you beat this problem?

[Dr_Hacks]

ilyapap2007,
Learn materiel. To migrate to 6, you need to save everything you can and sew with the format. The breakdown is changing. For new screens, moreover, under the new breakdown, although it is easy to get around.

[kikkers44]

Such is the problem with me, I have Cubot Note S, I bought it already used. Not the point. In short, I install it means ANY VPN application, it is installed, opened, connected. Everything seems normal. But I do not have access to the network, as if the Internet is not working. I turn off the application - the Internet is working again. I turn it on - it does not work again. Mystic right. And I do not sin on applications, the same applications work normally on other phones, there VPN does not block the Internet connection. I will not write the name, I'll just write one on Android 5.1, another on 4.4 and one more on 4.1

In the settings I fumbled with what was possible, I did not seem to be a fool, but I’m probably missing something. I would be happy to help and tips, unless of course this is not a problem in the firmware.

[Dr_Hacks]

kikkers44,
I used openvpn and privatetunnel, everything was fine. Change to zero with resetting everything to the tested firmware.

[23_V_A_23]

kikkers44, but does the application have permission to access the network?

[kikkers44]

23__V_A___23, but does the application have permission to access the network?

For some reason, he didn’t ask permission for something during installation.

Post has been editedkikkers44 - 08.02.19, 11:36

[23_V_A_23]

kikkers44, go look in the permissions, sometimes it does not ask but it is necessary

Posted 02/08/2019 12:15 PM:

kikkers44, I came across this on the crdroid firmware.

[kikkers44]

23_V_A_23,

there they are only asking for permission to send e-mail and MMS

[Legislador17]

Help Problem with Wi-Fi

[Dr_Hacks]

Legislador17,
Until you remember what was spinning - there is little that can be done. Resetting the phone will most likely help if the nvram area is not touched. Screen you jackdaws - well, maybe, but very soon.

[Legislador17]

Dr_HacksAs I quickly to the factory and without losing the tribute in the memory of the smartphone (Root is)
Maybe this is not my clatter, and if something is not right then it is selected only in the factory settings
It is very necessary with this d ... quickly rozobratsya

Post has been editedLegislador17 - 01.03.19, 12:53

Reason for editing: +

[Dr_Hacks]

Legislador17,
To factory without loss? Lol. The maximum can be saved by the titanium with everything that has been installed and the android id. But I would immediately say this and do it if I was sure that it would help, and there it is not a fact. So let's start with you - do ALL the screenshots of all the tabs where you dug in as an engineer and everything by wifi and I will compare them with my own, I still have the phone.
Well, yes, there is a very important thing - a kind of syslog, you can see through adb and so on through utilities of the market like logcat clones which are all called, start the recording, try to connect, stop the recording, log in the studio except for the screens.

[Krava]

Yakich @ 03/27/16, 00:02

*#*#3646633#*#*

On custom firmware (7.1.2)
Did not enter this menu in the engineering menu, until I reflashed itpatch.
After that, the engineering menu appeared on the team * # * # 3646633 # * # *,
but in the tabHardware testingno sectionAudio.
question:
How to increase the volume?

Level 0 - 45/160
Level 1 - 60/160
Level 2 - 75/160
Level 3 - 90/160
Level 4 - 105/160
Level 5 - 120/160
Level 6 - 135/160
Level 7 - 150/160
Level 8 - 165/160
Level 9 - 180/160
Level 10 - 195/160
Level 11 - 210/160
Level 12 - 225/160
Level 13 - 240/160
Level 14 - 255/160

[Ushiji]

Good day everyone. Answer who changed the screen + touch in the collection. This is a photo of my screen + touch.

Judging by the photo found on Alli from one seller I have version 1

I can not find this version1 screen + touch. Who had the same screen + tach tell me where they bought (reference) and went without dancing with a tambourine. Or which version was changed.? I did not do anything with my body, I did not rut and do not live. Thank you in advance. Sorry I can not hide the photo under spoler.

Post has been editedUshiji - 10.04.19, 10:29

Reason for editing: I can not hide the photo under the spoler

[rual1515]

From new still sell?

[wodolei088]

Greetings On CUBOT note S, an update arrived, installed, but when entering, the hostess forgot the account password. Need to untie, tell me how? Can I use a flashlight? And How?