Polomans,
I do not have this device. Just saw on which the site and decided to share

Please tell me how you do under win 10 displays video card?
Bought the first generation of the stick, updated bios, win up to 10 video adapters in the device list no. Driver intel site swear that is not compatible (x86 home). Through the properties of the screen reached a "standard video driver". the screen resolution does not change (it would be desirable to expose 720p)

ramon105, what kind of stick? They are as much as 4 species. for video driver should be taken only with the intel site and not to any other.

I have so:


Post has been editedZayaca - 10.02.19, 19:04

Understood. While you can not put a driver on SOC graphics card does not even appear in the list of devices and the driver from Intel's website he swears that is not designed for this system.
After installing the driver SOC - came standard graphics adapter device, which has risen from the center of the wood windows 10 update.

Prompt, than it is possible to remove the image from STCK1A8LFC? Acronis does not work

As promised earlier, I publish research about alternative decent food for Intel Stick to CoreM processor.

Alas, I only charger Defender UPA-50 or Defender UPA-60 came to power on Sticka CoreM5 processor. In this case Defender UPA-50 power USB type C port with its 3Amperami output was not enough. Sticku need exactly 5V @ 4A minimum, ie while 4 Ampere required. Given that the power supplies are now all with a small margin for voltage, 5.1-5.2 volt outlet have Defender UPA-50 Defender UPA-60. Defender UPA-60 is probably preferable to his current (power too) above - 6,2Ampera against 5A (more headroom for additional load on the other charger ports).
Cable recommend using Charging USB 2.0 type A ->type C from huaveya 5A, the one with a purple interface and thickened (extended) USB power contacts on the plug, and of desirably shorter 50cm, and may be 1 meter, but fz, as will work may not lived enough thickness. USB2.0 enough when using the charger, why the extra wires in the cable under the USB 3.0 to the charger.

There is another option, too, is absolutely working. Use the power supply 5V @ 4A or 5V5A c DC end and adapter DC->USB type C.

Well, even in summary, the use of a hub USB PowerDelivery, through which power is supplied to the Stick, - pointless. All these hubs allow only a maximum of 3A upward host USB type C PowerDelivery port at startup. But this is not enough Sticku. In the case of such a scheme - only the original power supply APD, he just output USB type C 5,2V @ 4A (instead of 2.2 A, as it is written on it). By the way, on all ports USB type A and type C sticka original power supply from Asian Power Devices (APD) - Supply voltage is 5.2 volts (!!!), and not as it is written in the APD PSU housing (5,2V @ 2.2 A type C, 5V @ 900mA type A x2 - (two USB3.0 type A port)). Those. Intel slightly slukavila about Sticka consumption CoreM5 processor - not 5,2V * 2.2 A = 11.5 watts in a very short maximum (and resets when the power Sticka or hang), and all 5,2V * 3,8A = 19 8 Watt !!!

Well and recommendations
Cable USB 2.0 typeA ->type C 5Amper 50 cm. It seems to me a bit tonkovat, but this USB 2.0, so it seems enough. Defender works perfectly with the UPA-50 UPA-60.
https://ru.aliexpress.com/item/Baseus-5A-usb-C-huawei-20-P30-P20-Pro-Lite-USBC/32963441176.html

Cable USB 2.0 typeA ->type C 5Amper 100 cm. It is not tested, it would be nice to find a similar version with a 50 cm.
https://ru.aliexpress.com/item/5A-USB-1-C-Xiaomi-samsung-huawei-Quick/32970304485.html

Cable USB3.1 type C 5Amper for the original power supply - 50 cm and 100 cm - both working perfectly. Sverhdlinnnogo recommend to replace the original.
https://ru.aliexpress.com/item/TIEGEM-usb-C-3-1-C-USB-C/32862893109.html

DC adapter ->type C
https://ru.aliexpress.com/item/USB-3-1-Type-C-USB-C-to-DC-5-5-2-1mm-Power-Jack-Extension/32738935336.html

I tried more and this cable to USB3.0 smartphone 30 cm long. With him, too, works in tandem with Defenderami UPA-50 UPA-60. But this cable is unnecessary precisely because of USB3.0. And this cable does tonkovat. Because it is not recommended
https://ru.aliexpress.com/item/TIEGEM-USB-3-0-C-2-4A-USB-C-huawei/32869141358.html

The power supply DC 5V @ 5A
https://ru.aliexpress.com/item/New-5V-5A-25W-Power-Supply-AC-100-240V-To-DC-Adapter-For-5050-3528-Led/32692830983.html

Post has been editedViacheslav8 - 05.03.19, 11:26

Put Android TV ... the flight is excellent, everything works

And I'm looking through the TV Eye. I vindovz 10.

Several times, while Intel drivers are not repaired, had blue screen when booting Windows: Conflict 10's with drivers from Intel. But now everything is fine with the latest update.

Post has been editedZayaca - 15.03.19, 10:05

Viacheslav8,
globally)
Funny is that I'm running from the USB port of your TV. Connected 10cm cable. Telly a Mystery, Full HD. I never cut down. But percent Z8330


Post has been editedXpressforze - 17.03.19, 16:26

Please tell me - is it possible to use a stick (like 1 and 2 versions - think whether to take it, and if you take any) as an adapter for mirakast / Weiden to the TV?
Those. in fact stick to the 80% needed to be that you could with your phone / tablet / nouta on vayfay wirelessly to cast to the TV image. I thought to take Microsoft adapter but then suddenly remembered the sticks.

And as we learned the second stick without an external adapter is not working, and the first work?

You normally and obviously on consumption - Atom processor, which "eats" less. In CoreM5 appetites clearly immodest, and therefore the problem of choice.

Xpressforze, It can be up and running from the usb, but it is inconvenient to include in this case: have to press a hard button on the Stick. And when power supply with socket I I stick it in switch with illumination and turn on the switch itself. stick itself, that the back of the monitor wall, include not work - reaching out to get uncomfortable.

Post has been editedZayaca - 27.03.19, 09:03

Zayaca Me when the TV set is switched stick))

https://aliexpress.com/item/-/32542843937.html

Prompt, this 4/64 enough to watch online and downloaded torrent movies?
An external hard drive to 500 GB read?

Well, why are not enough? Enough, of course. Enough and 2-32. Hard I connected to 2TB. It is advisable to connect to usb3, if any. In addition, there is a slot for an external card up to 64 GB. That is roughly 32 + 64 + hard disk.

For fast Internet would be better, of course,Intel Compute Stick STK2m3W64CC based Core m3-6Y30 processor- it supports the 5 GHz band, in contrast to the IntelВ® Compute Stick STCK1A32WFC (more).

Intel Compute Stick STK1AW32SC has usb3, and Intel Compute Stick STCK1A32WFC does notand here we must watch carefully to be. In the picture of Ali, he is (blue slot).

I havesuch.

Post has been editedZayaca - 30.03.19, 19:51

How to choose the bios to boot from the USB drive? It is necessary to rearrange the windsurfing from 32 to 64

There STK1AW32SC, on him SanDisk SDINADF4-32G (emmc) think perekatal on SanDisk SDINADF4-64G ($ 40) or SanDisk SDINADF4-128G ($ 80). RAM stands for 4 * D2516EC4BXGGB (4 Gbit * 4) 96 ball FBGA 1.35V 1600 Mbps, want to increase from 2Gb to 4Gb, I think 4 *MT41K512M16HA-125(8 Gbit * 4) such alter, Gb 4 will then operational. Someone else has already done? There are some difficulties, worries as to whether see BIOS)

I have such a problem.
I bought with aliexpress. I came with Win10 x64 one language. z8350, 2gb, 32gb
I want to put Win10 x32 (as 2 GB of RAM). I shake the image through the "MediaCreationTool1809". Pour the stick. It refuses to run.
Just stayed pouring image through WinSetupFromUSB-1-8 and rufus-usb-3-3. Or does not want to work with the stick, ie run the installation.
He always creates a stick in UEFI, can deal with this? The UEFI boot loader does not create?

Post has been editedvel418 - 09.04.19, 10:15

In general eksperementiruju further.
The fact is, as I want to install the x86 and writing the image to a USB flash drive only x86, it is even non-starters.

Filled image of x86 and x64 and start his choice of operating systems. Thus if the pick x86 gives the following error



If you select x64 installed.

Bios in any does not want to be updated. Available only through the update F7, in the BIOS nor any settings there that would be renewed through the BIOS.

In this case, I found here in this section of the BIOS in the following section Security

There are tips what be?

Post has been editedvel418 - 09.04.19, 15:15

Also want to increase the memory on your Intel Compute Stick STK1AW32SC. it would be nice perekatal to 4 GB. But what is a little dumb