[X]Assistant

[alex @ rya]

D-Link DPN-R5402 - Discussion

• In the subject are allForum Rulesand10 commandments novice who is hard to master the Rules of the Forum
  
• Discussion of devices not related to this topic is prohibited. If the theme you need for a specific model does not exist - create it.
  
• Instead of saying “Thank you!” Use. If you have less than 15 posts - click on the button.under the message where they helped you, and write thanks.
  
• Useful topics to note:Forum FAQ, How to search the forum?, How to remove the image under the spoiler., Guide Networks and Equipment
  

A photo:

Description:

Wireless 802.11n subscriber VoIP-gateway GPON (Gigabit-capable Passive Optical Network) ONT (Optical Network Terminal) Gigabit DPN-R5402 allows you to use a gigabit connection and voice services, for example, in small offices or multi-family buildings. GPON technology provides data transmission at speeds up to 2.4 Gbit / s over fiber and supports next-generation services for simultaneous work with voice traffic, video and data, including high-speed Internet access, streaming video and instant messaging. The gateway is equipped with an 802.11n wireless interface and four LAN ports, which allows you to connect to the network both wirelessly and using cables. The DPN-R5402 is an efficient, easy-to-install and high-performance device for accessing the Internet.

Specifications:

Setup and Management
• Remote control using PLOAM functions
• Management via G.984.4 OMCI (ONT Management and Control Interface)
• Secure access through ACL (Access Control List)
• Telnet session for remote management
• Shell & Logger for advanced customization / diagnostics use
• Software update via OMCI or CLI
• Customizable QoS classes and related parameters (T-CONT, PortID, AllocID)

GPON specifications
• Optical Transceiver GPON Class B +
• Upstream (Transmitter): 1310 nm +/- 50 nm, max. speed 1,244 Gbit / s (burst mode)
• Downstream (Receiver): 1490 nm +/- 10 nm, max. speed 2,488 Gbit / s (continuous mode)
• 1 port with SC connector with connectivity via fiber from CO
• Singlemode optical cable
• Maximum data transfer distance: 20 km
• Address management (add, delete, clear MAC address)
• IGMP v1 / v2 Snooping support, 16 entries, can be enabled / disabled, Fast leaving
• Configure UNI port (speed, duplex mode, flow control, turn off / on, automatic mode)
• ONT matching dying gasp
• ONT authentication
• Customizable AES encryption on DS payload
• Learning MAC addresses: up to 64
• Complete ONU ITU-T G.984 Feature Set with Advanced Features

LAN characteristics
• 10BASE-T IEEE 802.3
• 100BASE-TX IEEE 802.3u
• 1000BASE-TX IEEE 802.3ab
• IEEE 802.3x flow control (PAUSE frame)
• Auto-negotiation, automatic detection of MDI / MDIX polarity
• Ethernet packet size 522 bytes (Tag Packet)
• Manual speed setting: 10M, 100M, 1000M
• Cable: UTP (Category 5e)
• IEEE 802.1Q VLAN (32 VLAN, VID: 1-4094)
• VLAN trunk, VLAN based on user port and service type

VoIP Features
• Incoming and outgoing calls, Call waiting, Three-way conference call, Call forwarding, Caller ID display
• Voice codecs: 711 a-law, G.711 u-law, G.723.1A, G.729A, G.729B
• Voice: RTP Compliance (RFC1889)
• Call Control SIP (RFC3261)
• T.38 Fax relay
• Echo cancellation

Wireless Features
• 802.11n
• 2.4 GHz to 2.4835 GHz
• Encryption Protocols WEP, WPA-PSK and WPA-PSK AES

USB specifications
• Drive functionality
• SAMBA


Interfaces
• GPON port (SC connector)
• 4 10/100/1000 BASE-TX Gigabit Ethernet ports (RJ-45 connector)
• 2 VoIP FXS ports (RJ-11 connector)
• 802.11n WLAN (wirelessly connect computers to an access point)
• 2 USB 2.0 ports
• WPS button
• Factory reset button
• ON / OFF power switch

Indicators
• Power
• Link (PON)
• ACT (PON)
• LAN (1-4)
• Wi-Fi
• WAN
• Phone (1-2)
• VoIP
• USB (1-2)

Dimensions
228 x 160 x 40.98 mm

Weight
113.4 g

Nutrition
Output: 12 V / 2 A

Temperature
• Working: 0 to 40 C
• Storage: From -40 to 70 C

Humidity
From 0% to 95% (non-condensing)

Certificates
• CE
• FCC Class B

Useful links:

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links, or through QMS.

Post has been editedalex @ rya - 06.02.17, 19:18

[zorin_maksim]

Hello everybody!
I want to appeal to all knowledgeable and knowledgeable people. Interested in external access from the Internet to your home NAS. Provider Rostelecom and at the entrance is this piece of iron. I planned to configure via noip.com and in NAS there are settings for this. The question remains whether it is possible, and if so, what exactly needs to be configured in this device. If I correctly understood that the firmware from the provider is installed with a reduced functionality? Does anyone have any successful experience setting up access with this device?

[dronsow]

People tell me how to introduce this miracle into the repeater mode (that is, that it connect to the already created point and strengthen it)?

[nalussar]

No

[suslikinc]

Tell me comrades, put a flash drive in the USB port of this device, how to see it on the network?

[nalussar]

Suslikinc @ 02/10/2018, 16:01

Tell me comrades, put a flash drive in the USB port of this device, how to see it on the network?

No Is that the phone can be charged.

[Sergeyi_G]

suslikinc

If from a computer in Windows OS, then open any folder and in the address bar write: \\ IP-address router

[AntonR81]

How to enter my dns, I can not find anywhere?

[akkademikk]

AntonR81,Go to ip-router / routing / WAN IP Interface, there is a tick off the WAN IP Interface on Static, and fill in the IP, Mask, Gateway and dns fields, which you need. At the beginning of this page are ip, mask and so on. which the provider assigned, they can be rewritten, and dns is yours.


They wrote about flash drives in usb, and so, this is only possible on the firmware that konstw laid out, earlier on the topic.

Post has been editedakkademikk - 12.05.18, 18:22

[AntonR81]

I do not have such a tick.

[Soyan.biz]

Hello everyone, throw the latest firmware.

[boy78]

Good day to all, I support

Soyan.biz @ 05/27/18 16:13

drop the latest firmware

also very necessary!

[boy78]

I tried to fill in the firmware from konstw, it says "Could not open connection to this node, to port 23: Connection failed" what am I doing wrong? Like everything according to the instructions!

Attached images

[boy78]

What no one will help? : sveta:

[Soyan.biz]

is telnet enabled?

Attached images

[boy78]

Yes enabled, if you do not include it does not understand the telnet command. and if the cord is not connected immediately, it gives out and if you connect it to a long one, then it thinks for half a minute and then falls off!

Posted 06/11/2018 10:43 AM:

Drawstring to the first port.

[monoreals]

Funny router.
Rostelecom has closed, or rather restricted, the use of telnet from other backlights, except its own (172.0.0.0).
For the evening, lounging on the couch with a smartphone, got myself a telnet access, as well as a root.
Rostelecom is not to blame. The router itself has a hole into which you can climb with all your legs, and begin to make a wiggling waving rights of the root!)
I don’t want to describe publicly, I am afraid that Rostelecom will come to its senses, and will block this hole.
But, if there is a head on the shoulders, a little Google, and the ability to add 2 and 2, then everything is easily accessible.
P.s. By the way, in the RT configurations in the router all passwords are available (sip, iptv).
Dare.

[Soyan.biz]

tell me where to find this password? and generally need it

Attached images

Post has been editedSoyan.biz - 26.06.18, 14:43

[akkademikk]

boy78,
Why telnet? Try to upload your firmware from the web interface.
section: Management>Firmware upgrade

[monoreals]

Akkademikk @ 07/02/2018, 15:10

boy78,
Why telnet? Try to upload your firmware from the web interface.
section: Management>Firmware upgrade

RT trimmed their firmware utterly. There is not even this item (Firmware Upgrade)

[monoreals]

I am now interested in the technology of changing the firmware to the version: UL
Those.
1. we make backup settings.
2 flashing firmware UL
3. Recover from backup settings.
Right?

Or will work with Rostelecom take off right away?