ASUS RT-N14u | [wifirouter]
ASUS RT-N14U - Discussion
There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links, or through QMS.
Post has been editedAndrewP_1 - 24.10.18, 08:07
- In the subject are allForum Rulesand10 commandments novice who is hard to master the Rules of the Forum
- Discussion of devices not related to this topic is prohibited. If the theme you need for a specific model does not exist - create it.
- Instead of saying “Thank you!” Use
. If you have less than 15 posts - click on the button.
under the message where they helped you, and write thanks. - Useful topics to note:Forum FAQ, How to search the forum?, How to remove the image under the spoiler., Guide Networks and Equipment
A photo:
 |
Description:
A stylishly designed wireless router with a wide range of functions, which include: support for the AiCloud cloud platform, USB port for connecting peripheral devices, support for offline download of files from the Internet, quick setup of an Internet connection and other features
Specifications:
Supported Network Standards
IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11d, IEEE 802.3, IEEE 802.3u, IEEE 802.11i, IEEE 802.11e, IPv4, IPv6
Product Segment
N300 complete networking; 300Mbps
Data rate
802.11b: 1, 2, 5.5, 11Mbps
802.11g: 6,9,12,18,24,36,48,54Mbps
802.11n: up to 300Mbps
Antenna
Internal antenna x 2
Operating Frequency
2.4GHz
Encryption
64-bit WEP, 128-bit WEP, WPA2-PSK, WPA-PSK, WPA-Enterprise, WPA2-Enterprise, Radius with 802.1x, WPS support
Firewall & Access Control
- Firewall:
пјЋSPI intrusion detection
пјЋDoS protection
- Access control:
пјЋGuest access
пјЋParental control
пјЋNetwork service filter
пјЋURL / Port filter
Management
VPN support
Ipsec pass-throuth
PPTP Pass-Through
L2TP Pass-Through
WAN Connection Type
Internet connection type: Automatic IP, Static IP, PPPoE (MPPE supported), PPTP, L2TP
Dual Link support
Multicast Proxy support
Utilities
- Download master:
пјЋSupport BT, NZB, HTTP, ED2K
пјЋSupport encryption, DHT, PEX and magnet link
пјЋUpload and download bandwidth control
пјЋDownload scheduling
- Media server:
MageImage: JPEG
пјЋAudio: mp3, wma, wav, pcm, mp4, lpcm, ogg
пјЋVideo: asf, avi, divx, mpeg, mpg, ts, vob, wmv, mkv, mov
- Professional QoS:
пјЋWMM
пјЋUser definable rules for IP / MAC / Port
пјЋUpload and Download bandwidth management
пјЋACK / SYN / FIN / RST / ICMP with Highest priority
- Guest Access:
пјЋ3x guest networks
- Printer Server:
пјЋMultifunctional printer support (Windows only)
пјЋLPR protocol support
- File server:
пјЋSamba and FTP server with account management
- Network map
- Traffic monitor
Ports
1 x RJ45 for 10/100 BaseT for WAN, 4 x RJ45 for 10/100 BaseT for LAN
USB 2.0 x 1
Button
WPS Button, Reset Button, Power Button
Led indicator
USB x 1
LAN x 1
AIR x 1
WAN x 1
PWR x 1
Power supply
AC Input: 110V ~ 240V (50 ~ 60Hz)
DC Output: 12 V with max. 1 A current
OS support
Windows 7 32bit / 64bit
WindowsВ® 8 32bit / 64bit
Windows Vista 32bit / 64bit
Windows XP 32bit / 64bit
Dimensions
187 x 145 x 77 mm (WxDxH)
Weight
260 g
IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11d, IEEE 802.3, IEEE 802.3u, IEEE 802.11i, IEEE 802.11e, IPv4, IPv6
Product Segment
N300 complete networking; 300Mbps
Data rate
802.11b: 1, 2, 5.5, 11Mbps
802.11g: 6,9,12,18,24,36,48,54Mbps
802.11n: up to 300Mbps
Antenna
Internal antenna x 2
Operating Frequency
2.4GHz
Encryption
64-bit WEP, 128-bit WEP, WPA2-PSK, WPA-PSK, WPA-Enterprise, WPA2-Enterprise, Radius with 802.1x, WPS support
Firewall & Access Control
- Firewall:
пјЋSPI intrusion detection
пјЋDoS protection
- Access control:
пјЋGuest access
пјЋParental control
пјЋNetwork service filter
пјЋURL / Port filter
Management
VPN support
Ipsec pass-throuth
PPTP Pass-Through
L2TP Pass-Through
WAN Connection Type
Internet connection type: Automatic IP, Static IP, PPPoE (MPPE supported), PPTP, L2TP
Dual Link support
Multicast Proxy support
Utilities
- Download master:
пјЋSupport BT, NZB, HTTP, ED2K
пјЋSupport encryption, DHT, PEX and magnet link
пјЋUpload and download bandwidth control
пјЋDownload scheduling
- Media server:
MageImage: JPEG
пјЋAudio: mp3, wma, wav, pcm, mp4, lpcm, ogg
пјЋVideo: asf, avi, divx, mpeg, mpg, ts, vob, wmv, mkv, mov
- Professional QoS:
пјЋWMM
пјЋUser definable rules for IP / MAC / Port
пјЋUpload and Download bandwidth management
пјЋACK / SYN / FIN / RST / ICMP with Highest priority
- Guest Access:
пјЋ3x guest networks
- Printer Server:
пјЋMultifunctional printer support (Windows only)
пјЋLPR protocol support
- File server:
пјЋSamba and FTP server with account management
- Network map
- Traffic monitor
Ports
1 x RJ45 for 10/100 BaseT for WAN, 4 x RJ45 for 10/100 BaseT for LAN
USB 2.0 x 1
Button
WPS Button, Reset Button, Power Button
Led indicator
USB x 1
LAN x 1
AIR x 1
WAN x 1
PWR x 1
Power supply
AC Input: 110V ~ 240V (50 ~ 60Hz)
DC Output: 12 V with max. 1 A current
OS support
Windows 7 32bit / 64bit
WindowsВ® 8 32bit / 64bit
Windows Vista 32bit / 64bit
Windows XP 32bit / 64bit
Dimensions
187 x 145 x 77 mm (WxDxH)
Weight
260 g
Useful links:
There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links, or through QMS.
Post has been editedAndrewP_1 - 24.10.18, 08:07
Reason for editing: Padavan firmware with Wi-Fi 3.0 driver
There is an rt-n14u router with installed padawan firmware. I can’t get ipv6 to work in any way, the service in dom.ru is enabled, in the settings of the network card there is a tick next to the ipv6 protocol. In the application file with the settings, please help. Thank.
 |
The topic is old, but came across a comment by Podanana. Maybe someone will come in handy.
In the latest firmware, you can already choose "receive from both sources"
There are 2 ways to get IPv6 addresses
1) via Router Advertisement (RA)
2) via DHCPv6 client
For IPv6 to work behind a router, you need to have two IPv6 addresses. One on the WAN interface, the other on the LAN. They are issued by a provider or a tunnel broker.
You do not need to prescribe anything on the computer manually, if the IPv6 prefix falls on the LAN, then the router will send all the hosts on the LAN automatically.
You have PPPoE, in the case when the provider provides a non-IPoE connection, then IPv6 can be delegated from both the PPP (WAN) interface and the Ethernet (MAN) interface. Depends on the provider. You have the ppp0 interface selected in the IPv6 settings, while you get the LAN IPv6 prefix (IA-PD), but you get nothing on the WAN. Try setting "Select WAN interface for IPv6" = MAN.
1) via Router Advertisement (RA)
2) via DHCPv6 client
For IPv6 to work behind a router, you need to have two IPv6 addresses. One on the WAN interface, the other on the LAN. They are issued by a provider or a tunnel broker.
You do not need to prescribe anything on the computer manually, if the IPv6 prefix falls on the LAN, then the router will send all the hosts on the LAN automatically.
You have PPPoE, in the case when the provider provides a non-IPoE connection, then IPv6 can be delegated from both the PPP (WAN) interface and the Ethernet (MAN) interface. Depends on the provider. You have the ppp0 interface selected in the IPv6 settings, while you get the LAN IPv6 prefix (IA-PD), but you get nothing on the WAN. Try setting "Select WAN interface for IPv6" = MAN.
In the latest firmware, you can already choose "receive from both sources"
Does anyone have this beast with a USB modem? I want to buy it at the dacha and use it with the Huawei E3372s (MTS 827F). How does the device behave? And judging that there is no discussion about him at all, then there is no problem with him, or no one else has it =)
nsa-69, nsa-69 @ 03/31/17, 19:24
Works tried with mts and stitched under any sim card
Thank! Ordered for 1939r. humane price tag, I hope to cope with my tasks.
Help, stitched with Padavan firmware and apparently what went wrong. I do not see the Wifi network, in general, I can not get to the webmord at all. I am flashing through the factory utility, I enter into the mode of a slowly blinking lamp, and the firmware drain ends with an error. What could be?
St.Ig, for some reason, on any firmware, on one computer up to 28% and an error. On the other from 78-92% error. I can not completely flash ...
In short, I got rid of))) my first Padawan firmware went smoothly, but it created the ASUS network and the password 1234567890. But still there were errors in the recovery mode ... But it turns out to be recovered and not needed.
+ P.S. the very thing that was misleading that I have 2 more in the neighborhood of these ASUS)))
Post has been editedBesprizornik - 03.04.17, 21:38
+ P.S. the very thing that was misleading that I have 2 more in the neighborhood of these ASUS)))
Post has been editedBesprizornik - 03.04.17, 21:38
Besprizornik Which set - basic, full? In general, the Padawan router is extremely stable. Adjust it normally and do not touch.
St.Ig, Put the full 3.4.3.9-099 this version, it seems to be the latest. I have a question, I will use it in the country house with an E3372s modem (MTS 827F) so that it starts up, turned on the "only modem" mode in the router settings, I see that it is in RAS mode, you can switch it to NDIS mode (like in this mode it will be faster). Is it possible to enable this mode and will the router see it?
Plz explain - what is Padawan firmware, where to find them and why are they needed?
There is a router on the firmware, it works fine, BUT ... with settings on which, in theory, should not work at all.
That is, the default is to configure the PPTP network and everything else (dns, etc.) - automatically, and in the TP of the provider they say that DHCP should be set. With DHCP, the router connects to the prov, it works for half a minute and falls off the network.
How to understand what's wrong with me?
There is a router on the firmware, it works fine, BUT ... with settings on which, in theory, should not work at all.
That is, the default is to configure the PPTP network and everything else (dns, etc.) - automatically, and in the TP of the provider they say that DHCP should be set. With DHCP, the router connects to the prov, it works for half a minute and falls off the network.
How to understand what's wrong with me?
Who will tell, here it began,
I download files with a speed of 300 Kb / s, and check for speedtestthat's whatShows some kind of tin.
Post has been editedUr4ela - 13.04.17, 23:02
Mar 10 19:06:07 xl2tpd [3318]: Connecting to host tp.internet.beeline.ru, port 1701
Mar 10 19:06:38 xl2tpd [3318]: Maximum retries exceeded for tunnel 12695. Closing.
Mar 10 19:06:38 xl2tpd [3318]: Connection 0 closed to 85.21.0.241, port 1701 (Timeout)
Mar 10 19:07:09 xl2tpd [3318]: Unable to deliver closing message for tunnel 12695. Destroying anyway.
Mar 10 19:07:09 xl2tpd [3318]: Will redial in 15 seconds
Mar 10 19:07:24 xl2tpd [3318]: Connecting to host tp.internet.beeline.ru, port 1701
Mar 10 19:07:55 xl2tpd [3318]: Maximum retries exceeded for tunnel 10348. Closing.
Mar 10 19:07:55 xl2tpd [3318]: Connection 0 closed to 85.21.0.243, port 1701 (Timeout)
Mar 10 19:08:26 xl2tpd [3318]: Unable to deliver closing message for tunnel 10348. Destroying anyway.
Mar 10 19:08:26 xl2tpd [3318]: Will redial in 15 seconds
Mar 10 19:08:41 xl2tpd [3318]: Connecting to host tp.internet.beeline.ru, port 1701
Mar 10 19:09:13 xl2tpd [3318]: Maximum retries exceeded for tunnel 36054. Closing.
Mar 10 19:09:13 xl2tpd [3318]: Connection 0 closed to 85.21.0.241, port 1701 (Timeout)
Mar 10 19:09:44 xl2tpd [3318]: Unable to deliver closing message for tunnel 36054. Destroying anyway.
Mar 10 19:06:38 xl2tpd [3318]: Maximum retries exceeded for tunnel 12695. Closing.
Mar 10 19:06:38 xl2tpd [3318]: Connection 0 closed to 85.21.0.241, port 1701 (Timeout)
Mar 10 19:07:09 xl2tpd [3318]: Unable to deliver closing message for tunnel 12695. Destroying anyway.
Mar 10 19:07:09 xl2tpd [3318]: Will redial in 15 seconds
Mar 10 19:07:24 xl2tpd [3318]: Connecting to host tp.internet.beeline.ru, port 1701
Mar 10 19:07:55 xl2tpd [3318]: Maximum retries exceeded for tunnel 10348. Closing.
Mar 10 19:07:55 xl2tpd [3318]: Connection 0 closed to 85.21.0.243, port 1701 (Timeout)
Mar 10 19:08:26 xl2tpd [3318]: Unable to deliver closing message for tunnel 10348. Destroying anyway.
Mar 10 19:08:26 xl2tpd [3318]: Will redial in 15 seconds
Mar 10 19:08:41 xl2tpd [3318]: Connecting to host tp.internet.beeline.ru, port 1701
Mar 10 19:09:13 xl2tpd [3318]: Maximum retries exceeded for tunnel 36054. Closing.
Mar 10 19:09:13 xl2tpd [3318]: Connection 0 closed to 85.21.0.241, port 1701 (Timeout)
Mar 10 19:09:44 xl2tpd [3318]: Unable to deliver closing message for tunnel 36054. Destroying anyway.
I download files with a speed of 300 Kb / s, and check for speedtestthat's whatShows some kind of tin.
Post has been editedUr4ela - 13.04.17, 23:02
[email protected], 23:01
Who will tell, here it began,
I download files with a speed of 300 Kb / s, and check for speedtestthat's whatShows some kind of tin.
Mar 10 19:06:07 xl2tpd [3318]: Connecting to host tp.internet.beeline.ru, port 1701
Mar 10 19:06:38 xl2tpd [3318]: Maximum retries exceeded for tunnel 12695. Closing.
Mar 10 19:06:38 xl2tpd [3318]: Connection 0 closed to 85.21.0.241, port 1701 (Timeout)
Mar 10 19:07:09 xl2tpd [3318]: Unable to deliver closing message for tunnel 12695. Destroying anyway.
Mar 10 19:07:09 xl2tpd [3318]: Will redial in 15 seconds
Mar 10 19:07:24 xl2tpd [3318]: Connecting to host tp.internet.beeline.ru, port 1701
Mar 10 19:07:55 xl2tpd [3318]: Maximum retries exceeded for tunnel 10348. Closing.
Mar 10 19:07:55 xl2tpd [3318]: Connection 0 closed to 85.21.0.243, port 1701 (Timeout)
Mar 10 19:08:26 xl2tpd [3318]: Unable to deliver closing message for tunnel 10348. Destroying anyway.
Mar 10 19:08:26 xl2tpd [3318]: Will redial in 15 seconds
Mar 10 19:08:41 xl2tpd [3318]: Connecting to host tp.internet.beeline.ru, port 1701
Mar 10 19:09:13 xl2tpd [3318]: Maximum retries exceeded for tunnel 36054. Closing.
Mar 10 19:09:13 xl2tpd [3318]: Connection 0 closed to 85.21.0.241, port 1701 (Timeout)
Mar 10 19:09:44 xl2tpd [3318]: Unable to deliver closing message for tunnel 36054. Destroying anyway.
Mar 10 19:06:38 xl2tpd [3318]: Maximum retries exceeded for tunnel 12695. Closing.
Mar 10 19:06:38 xl2tpd [3318]: Connection 0 closed to 85.21.0.241, port 1701 (Timeout)
Mar 10 19:07:09 xl2tpd [3318]: Unable to deliver closing message for tunnel 12695. Destroying anyway.
Mar 10 19:07:09 xl2tpd [3318]: Will redial in 15 seconds
Mar 10 19:07:24 xl2tpd [3318]: Connecting to host tp.internet.beeline.ru, port 1701
Mar 10 19:07:55 xl2tpd [3318]: Maximum retries exceeded for tunnel 10348. Closing.
Mar 10 19:07:55 xl2tpd [3318]: Connection 0 closed to 85.21.0.243, port 1701 (Timeout)
Mar 10 19:08:26 xl2tpd [3318]: Unable to deliver closing message for tunnel 10348. Destroying anyway.
Mar 10 19:08:26 xl2tpd [3318]: Will redial in 15 seconds
Mar 10 19:08:41 xl2tpd [3318]: Connecting to host tp.internet.beeline.ru, port 1701
Mar 10 19:09:13 xl2tpd [3318]: Maximum retries exceeded for tunnel 36054. Closing.
Mar 10 19:09:13 xl2tpd [3318]: Connection 0 closed to 85.21.0.241, port 1701 (Timeout)
Mar 10 19:09:44 xl2tpd [3318]: Unable to deliver closing message for tunnel 36054. Destroying anyway.
I download files with a speed of 300 Kb / s, and check for speedtestthat's whatShows some kind of tin.
I recommend asking this question in the ASUS RT-N56U branch. These routers are somewhat similar. And that monitor branch
Hi everybody. Such a situation, there is this router with installed openwrt firmware, with all the necessary packages, etc. and etc. You need to make a full dump of the firmware and upload it to a similar router, in general, make a clone.
I shoveled all Google, there are solutions, but they do not help ((
Is there anyone faced with such cases? I ask for help
I shoveled all Google, there are solutions, but they do not help ((
Is there anyone faced with such cases? I ask for help
fostrex Try this way PROMETHEUS (Post izon # 46108967)
I collected it myself in VMWare
, pulled out the firmware just like that, everything works.
Post has been editedvylen - 19.04.17, 11:52
Reason for editing: Refinement
[email protected], 02:16
pour it on a similar router, in general, make a clone.
Will you share the clone, is the router exactly n14u?
Thank you already installedthe second way.
Russification from native repasitory luci-i18n-russian 0.12 + svn-r10530-1
Post has been editedUr4ela - 26.04.17, 04:42
Tell the experts .. the router works on the latest stock firmware .. it works fine on the cable .. but Wi-Fi doesn’t want to give out .. that is, the devices see it, but they can’t connect .. the authentication error .. I set the password and all that correctly. ..or happens for a turn ... router, I restart ... after restarting the bodies .. the plates are cut automatically by the wafer .. and after 1 min the wafer falls off .. that is, it does so .. bodies and tablets are connected to the wafer but there is no Internet . and the icon that is connected is hanging .. if disconnecting from the wifi at that moment, then it won’t connect again ... some kind of crap is happening with the wifi of this modem ... I’m thinking to flash it with padawan .. will it help or not?
Satirovv , distribution of addresses on DHCP? Specify static addresses of devices in the DHCP settings. Maybe the neighbors on the same channel are sitting and slaughtering, on the other go. Try to set the channel width to 20 Mhz. I had a weak signal at 40 and frequent shutdowns. I do not know how the stock, I have a padawan, it works fine.©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement