Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Philips Xenium V387 - Firmware |
Message#2 24.11.14, 19:40 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 535 Check in: 13.09.12 Lenovo P2 3/32 Reputation: 456 | Ruth received a recovery through TWRP, the back cover of the matavaya is even serehovatovaya, the firmware works smartly and smoothly, there is a lot of free operating memory. Post has been editedvaalf - 12.12.15, 20:29 |
Message#3 30.11.14, 06:39 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 535 Check in: 13.09.12 Lenovo P2 3/32 Reputation: 456 | Team Win Recovery Project v.2.7.1.1 downloadAll that you do is at your own risk, if you are not sure, do not do it better. Installation: 1. Install drivers on PC:Drivers.zip(8.65 MB) 2. Download and unpack SP_Flash_Tool_v5.1352.01 to the root of drive C:SP_Flash_Tool_v5.1352.01.rar(30.5 MB) 3. Download TWRP unpack to the root of drive C:TWRP.rar(7.46 MB) 4 Run the program SP_Flash_Tool 5. Click in the Scatter-loading program and select MT6582_Android_scatter in the folder where you unpacked TWRP, set the firmware type to Downloand Only. 6. Turn off the smartphone and remove the battery and insert it again. 7. In the SP_Flash_Tool program, press the Downloand button and connect the smartphone to the PC after the installation, it should appear that it’s installed. 8. Disconnect the smartphone from the PC and go to the recovery power button + volume button +, if TWRP was opened, then everything was done correctly. Post has been editediwewni - 11.02.15, 11:39 |
Message#4 30.11.14, 06:53 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 535 Check in: 13.09.12 Lenovo P2 3/32 Reputation: 456 | ROOT rights for Philips V387 Installation: 1. Install TWRP:Philips Xenium V387 - Discussion (Post # 36131238) 2. Throw UPDATE-SuperSU-v2.13 or kinguser3.4.5_for_4.4Root_RU archive into the SDcard root. 3. Go into the recovery and install the installation package. SuperSU:UPDATE-SuperSU-v2.13.zip(2.52 MB) Kinguser:kinguser3.4.5_for_4.4Root_RU.zip(889.47 KB) Post has been editediwewni - 30.11.14, 06:53 |
Message#5 30.11.14, 07:31 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 535 Check in: 13.09.12 Lenovo P2 3/32 Reputation: 456 | Custom firmware Philips_V387_by_iwewni. The author does not bear any responsibility for damage to your equipment. You must understand that you do everything at your own peril and risk. First of all what to do, make backup firmware Changes: 1. Based on stock V13. 2. Removed unnecessary software about 100 m. 3. Photo caller in full screen. 4. Advanced Power menu. 5. Added autoload in settings. 6. In the settings added My Settings. 7. In my settings added engineering menu. 8. In my settings added replacement system font. 9. In my settings, added changes to the style of the curtain. 10. Removed the letters G, 3G. 11. Added support for init.d. 12. Added Root Hell. 13. In the quick tile setting panel in 4 lines 14. Added Lenovo compas 15. Apollo Pleer Added 16. Added flashlight 17. Added Root Explorer 18. Added Titanium Backup 19. Sewn root. Screenshots: Installation: 1. Install TWRP:Philips Xenium V387 - Discussion (Post # 36131238) 2. Throw the firmware into the root of the SDcard. 3. Go to the recovery, make backup just in case. 4. Install the firmware. 5. Reboot. Patches: Patch number 1Mod_patch.zip(36.15 MB) Changes: 1. Clock with seconds in the center of the status bar; 2. In the status bar, the internet connection speed indicator; 3. Change the style of the battery in the settings; 4. Included multiuser to 999 people; 5. Automatically show tiles of quick settings if there are no cleared notifications; 6. In the launcher, the search string was removed; 7. Improved quality of miniatures in contacts; 8. I edited the dialer (the end button was removed to the bottom, made the buttons translucent) Screenshots: The firmware itself:Here Post has been editediwewni - 19.01.15, 11:00 |
Message#6 30.11.14, 07:53 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 535 Check in: 13.09.12 Lenovo P2 3/32 Reputation: 456 | Patches for Philips V387 Installation via TWRP. 1. Patch increases the sound level in conversational dynamics:volume_patch_Philips_V387.zip(169.4 KB) 2. Patch for music lovers ViPER BOX2ViPER_BOX2.zip(9.03 MB) Description: ViPER BOX2 is practically the same viper only renamed and replaced with a label specifically for this mod. Removed languages other than English / Russian and there are some unnecessary items in the additional menu. This is a personal collection of Dolby, Beats, SRS libraries combined with ViPER4Android (driver 2.3.3.0). After installing the mod, take a look at the body's native flash drive, there should be an archive ViPER_BOX2_backup.zip, by flashing it you roll back the body to the state before flashing the mod. In order for Poweramp and other system music players (for example, MIUI music player, Apollo, etc.) to work with ViPER BOX2, you need to go into the player: Settings / Sound / Advanced Settings / Disable direct volume control. and tick the MusicFX checkbox. Then, on the tone / volume tab, set the forced processing by activating the musicfx item, by long pressing musicfx, the equalizer opens, which is now used by the system Installation: After the firmware, we go to ViPER, press the left touch key, install the driver, after reboot, check if the equalizer opens, shows the installed driver (it seems to work but the sound does not change) set the fix (it only worked with fix) Fix itself:fix.zip(438.34 KB) |
Message#7 30.11.14, 08:09 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 535 Check in: 13.09.12 Lenovo P2 3/32 Reputation: 456 | |
Message#8 02.12.14, 10:50 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 535 Check in: 13.09.12 Lenovo P2 3/32 Reputation: 456 | I reloaded the firmware based on the stock V13Philips Xenium V387 - Discussion (Post # 36131430) iwewni And what are the differences compared to the previous one? I'm sitting on your previous custom |
Message#9 02.12.14, 13:52 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 535 Check in: 13.09.12 Lenovo P2 3/32 Reputation: 456 | [email protected], 14:47 And what are the differences compared to the previous one? I'm sitting on your previous custom I didn’t notice any changes, I just got a little bit quicker. I pasted in the previous firmware official update Philips to version V13. [email protected], 16:37 and ViPER BOX2 put through the recovery? like mod? Yes, through TWRP recovery. Post has been editediwewni - 02.12.14, 13:55 |
Message#10 02.12.14, 23:27 | |
Experienced [online] Group: Friendssavagemessiahzine.com Messages 476 Check in: 11.02.10 Reputation: 29 | iwewni Yes, thanks, in the afternoon I put your second build, it’s a pity that during the installation all the programs and accounts fly off, how to become new (I put the build in 2 days in a row and I build software for 2 days) I would add to the header info about turning off unnecessary unused frequencies and the ability to reassign the menu buttons for right-handers and back (swap) Max_in_wonderland, Put Nova launcher, everything is a little smaller and faster (about icons) My Economy mode slider rattles when I’m not on: beee: If you shake the device near the ear, you can hear it well. -------------------- LG Gram 13 Oneplus 6T |
Message#11 03.12.14, 14:55 | |
Veteransavagemessiahzine.com [offline] Group: Friendssavagemessiahzine.com Messages 8895 Check in: 27.03.08 Meizu Pro 6 Plus 64GB Reputation: 3657 | V387 M6582A 1448 V13A RU - Factory firmware for installation via the Flash Tool (for installation instructions, see the Flash Tool topic) DOWNLOAD -------------------- Philips S257 / E722G / TLE821L. Portable sound: Luxury & Precision L5 Pro, HiFiMan HM-603, Earsonics SM3 v2, Denon AH-D5000, Sony MDR-MA900. |
Message#12 04.12.14, 11:01 | |
Visitor [offline] Group: Active users Messages 24 Check in: 15.10.13 Reputation: 0 | Maybe someone will be useful for non-rooted phone I threw all the applications, games and all the batwa from the SD card into the phone's memory, so that the request for SD would not eat the battery. In the settings of applications, games turned off notifications. And oplya, if earlier when you turn on the phone 70% of games and applications worked, now they were all turned off. I don’t know if the transfer or the battery server application helped But yesterday, when using the phone for half an hour as a dialer, only 5% of the charge was spent per day. To put your ringtones on calls, you need to create a Ringtones folder in the phone’s memory or on SD (better in memory - the battery is less discharged when a call comes in) and throw tracks there, then in the sound profile these tracks will appear in the list of default settings. Post has been editedonekrasov - 04.12.14, 11:11 |
Message#13 04.12.14, 18:49 | |
Visitor [offline] Group: Users Messages 12 Check in: 31.10.09 Asus pegasus 3s Reputation: 0 | Philips_V387_1448_v13_RU system update has been released. According to the description: bug fix. Size 7.5 MB. It became with the installed TWRP (I had to disable the Zip file signature verification). When downloading, he said that he could not be updated, but in the version he shows a new version and when checking for updates, he says that the latest version is worth it. Let's see what will change. Posted 12/04/2014 6:49 PM: Jaguaarwho writes - computer or phone? If the computer - then there may be a problem in the USB-cord? Attached files Philips_V387_1448_v13_RU_update.zip(7.42 MB) |
Message#14 04.12.14, 21:23 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 89 Check in: 11.11.13 Reputation: 0 | The program to repair IMEIhttp: //cs01.userfiles...__mtk6515-spaces.ru.zip imei_mtk6515.zip Attached files imei_mtk6515-spaces.ru.zip(16.84 KB) |
Message#15 04.12.14, 21:28 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 89 Check in: 11.11.13 Reputation: 0 | Team Win Recovery Project v.2.7.1.1 for philips v387 DOES NOT SEE a USB flash drive in CREATE mode how it will be fixed please tell me !!!!!!! |
Message#16 05.12.14, 00:39 | |
Experienced [online] Group: Friendssavagemessiahzine.com Messages 476 Check in: 11.02.10 Reputation: 29 | iwewniIn order for Poweramp and other system music players (for example, MIUI music player, Apollo, etc.) to work with ViPER BOX2, you need to go into the player: Settings / Sound / Advanced Settings / Disable direct volume control. and tick the MusicFX checkbox. Then, on the tone / volume tab, set the forced processing by activating the musicfx item, by long pressing musicfx, the equalizer opens, which is now used by the system In the settings of Apollo there are no data points ... what to do? Alienelf Philips_V387_1448_v13_RU system update has been released. According to the description: bug fix. Size 7.5 MB. It became with the installed TWRP (I had to disable the Zip file signature verification). When downloading, he said that he could not be updated, but in the version he shows a new version and when checking for updates, he says that the latest version is worth it. And what version of the kernel has it become? -------------------- LG Gram 13 Oneplus 6T |
Message#17 06.12.14, 08:51 | |
a guest [offline] Group: Users Messages 8 Check in: 16.01.14 Reputation: 1 | iwewni I stumbled on stage 1 - the driver has nothing to install ... When connecting, Win7 itself installed all the drivers, does not want to replace them with files from the archive .... In the system, the included body looks like this - no ADB devices and other things Post has been editedvaalf - 17.09.15, 21:39 |
Message#18 06.12.14, 21:46 | |
Novice [offline] Group: Active users Messages 34 Check in: 08.11.12 Asus ZenFone Max Pro M1 ZB602KL 4/64 Reputation: 6 | Is there a topic updated for Philips_V387_1448_v13_RU? After the update, my indicator turned from red to some bright lilac (or crimson or ..., it's hard to even describe the color, but obviously not red) when charging. ROOT is present. Installed GravityBox. If you set "Emulation" in the charge indication, then the LED becomes normally red. When you switch to the "Default" (or when you disable the module GravityBox) again this strange color. Everything was fine before the update. Please say those who have updated this is present or not. Not very annoying, but I'm afraid that the indicator will burn. Post has been editedDimS_spb - 06.12.14, 21:47 |
Message#19 06.12.14, 23:50 | |
Visitor [offline] Group: Active users Messages 28 Check in: 05.03.13 Nokia Lumia 1320 Reputation: 0 | DimS_spb Is there a topic updated for Philips_V387_1448_v13_RU? After the update, my indicator turned from red to some bright lilac (or crimson or ..., it's hard to even describe the color, but obviously not red) when charging. ROOT is present. Installed GravityBox. If you set "Emulation" in the charge indication, then the LED becomes normally red. When you switch to the "Default" (or when you disable the module GravityBox) again this strange color. Everything was fine before the update. Please say those who have updated this is present or not. Not very annoying, but I'm afraid that the indicator will burn. I confirm, similarly, when charging, a strange color, when incoming notifications flashes green when the battery is low, less than 15% flashes red |
Message#20 07.12.14, 00:29 | |
Experienced [online] Group: Friendssavagemessiahzine.com Messages 476 Check in: 11.02.10 Reputation: 29 | |
Message#21 07.12.14, 01:05 | |
Novice [offline] Group: Active users Messages 34 Check in: 08.11.12 Asus ZenFone Max Pro M1 ZB602KL 4/64 Reputation: 6 | [email protected], 00:29 As usual, first ROOT from the header, then Xposed from here.® XposedWell, and then through Xposed I downloaded Gravity. Post has been editedDimS_spb - 07.12.14, 01:10 |
mobile version | Now: 04/28/19, 20:10 |