CheckMTK ClearMotion Activations

1. Dial in the phone*#*#3646633#*#* to open the "Engineering mode".
2. Go to the tab "Hardware Testing" Testing and go to "Video".

3.Set "ClearMotion Demo" to 1
Now, when you open any video using MX player, you will see a screen divided into two halves.

The left side indicates that ClearMotion is enabled, the right side shows that ClearMotion is disabled.
This means that ClearMotion works.
In case ClearMotion does not work, the screen will not be divided into two halves.
4. Turn off the demo mode, set “ClearMotion Demo” to 0.

Split screen only works on HW decoder



Post has been editedmaks1m1 - 13.02.16, 11:12

Unzip to appropriate folders
/ system / app
/ system / framework
Set permissions for apk and jar (644) rw-r - r--, for folders (0755) rwxr-xr-x
Reboot phone
Select the keyboard in the settings.

Keyboard.zip(9.48 MB)





Post has been editedmaks1m1 - 21.02.16, 20:53

Standard clock with a flashing colon + display of the city and weather + switching to the widget of the music player

Unpack archive
Throw weather_clock.mtz along the way:
/ system / media / theme / default / gadgets /
Set permissions (644) rw-r - r--
Reboot phone

How to choose a widget:
On the rob. table hold the "Menu" button
Until you see the "Sort", "Widgets", "Wallpaper", "Effects" buttons
Then click "Widgets", then "Clock", then "Clock with the weather."
Everything.

weather_clock.zip(347.75 KB)






Post has been editedmaks1m1 - 13.02.16, 11:10

avell,
for now it is possible on folders, a photo




Post has been editedilya0103 - 30.01.16, 20:50

ATTENTION!!! SetOnly with the unlocked bootloader!

TWRP 3.1.0forXiaomi Redmi Note 3 : recovery.img(11.2 MB)

Recovery is based on MiuiPro firmware version 6.4.28 / Thu Apr 28 00:09:11 CST 2016


Post has been editedjemmini - 14.03.17, 00:00

Made clearmotion for recovery




clearmotion.zip(1.61 MB)


Post has been editedilya0103 - 31.01.16, 12:25

Add this to the cap in the fact in the first spoiler. Well pulled up already through the page to ask.

I bought a phone, how to understand, I have my own firmware and will there be updates over the air (OTA)?
1. If you have Russian or Ukrainian interface languages ​​- 100% non-native! This or samopal from kitaez, or localized from groups of developers. OTA on them either does not come, or comes,but you can not put it, you will fail or get a brick! Stitch only with your hands!
2. If you have only English and 2 Chinese languages. Look in the device information version of MIUI. If it saysStable and number for example 77 .0.19.0, 7. 00 .19.0, 7.0. 919 .0, 7.0.19. 00 , 7.0.19. 0.0 In general, any combination of two sevens in the first group, or two zeros in the first and last group, or 3 digits in the third group, or 0.0 at the end, is Chinese samopal! OTA on them either does not come, or comes,but you can not put it, you will fail or get a brick! Stitch only with your hands!
3. Example of native firmware: Stable 7.0.11.0 (LHNCNCJ), Stable 7.1.7.0 (LHNCNCK). OTA should come to them, but there are lags too.





Post has been editedilya0103 - 31.01.16, 14:55

overedal loudness- (rabbit isfastboot mode ).

Hold the power button until the screen turns off. If it does not turn off this way, then hold down all 3 buttons for 20 seconds until the "rabbit" goes out.

Then:
1) Turn off the phone;
2) Click download in Flashtool
3) Press the buttonvolume"-" on the phone
4) Insert the cord into the phone and immediately press the "power "(how to turn on the phone, i.e. press and immediately release)
5) Ranredbar - release "power" and hold the volume button "-"
6) Ranyellowband - the volume "-" can be released and wait for the end of the firmware

H. Curator! Please add this process of connecting the phone to the header. Many from ignorance are lost in the instructions.




Post has been editedilya0103 - 08.02.16, 16:33

NEW Grid 5x3 + Removed search + Transparency (Blur) - Notification_panel_no_music_5x3.zip (1.54 KB)



NEW In order to display the 5x4 grid, you need to setNotification_panel_no_search_5x3.zip(1.53 KB)
and replace (install)Clock in the center + Buns for 6.2.18


Ready patch for Recovery -Centred_Clock_NoSearch_Grid5x4_6.2.18.zip(1.85 MB)

According to the idea should be suitable for any weekly 6.2.18
Before any manipulations the BACKUP is OBLIGATORY !!!



Everything you do you do at your own peril and risk!
Before any manipulations the BACKUP is OBLIGATORY !!!



Post has been editedmaks1m1 - 25.02.16, 11:28

Dear users, who have found any problems in your phone. You have a real opportunity to tell developers directly about your problem.

Instructions how to do it

Typing
*#*#284#*#*
From the moment you type you have about 1 minute to reproduce the bug (vibration at the beginning and end of the recording)
The log is saved along the path: MIUI / debug_log / bugreport-xxxx-xxxxxx.zip
Proof in English

Come onMIUI bugs forum thread, press Report Bugs on the right at the top, specify your firmware (multi-way goes like China Stable, do not specify Global, do not understand you :)) and describe the problem in detail.
In the column Steps to reproduce, write step by step how you reproduced this problem during the recording.
Count Reproduce rate is the accuracy of your description of playback. If you are sure in the scenario of the appearance of a bug, specify 100%
You attach a log and publish.

Many people write there about bugs and without a log, but from my own experience I can say that the fix is ​​done with a log very quickly and accurately. I have already solved the second problem (tools sim and BLE)

Attach a hat so people know where to write



Post has been editeddevserg - 02.02.16, 22:43

for Recovery - Centred_Clock_6.1.29.zip(1.86 MB)


for Recovery - Centred_Clock_6.2.18.zip(1.87 MB)



- correct display of Wi-Fi,on rightfrom 2 sim cards, not between + 3x4 grid + the connection / disconnect sound is muted
for Recovery - Centred_Clock_6.2.18.zip (1.85 MB)


- correct display of Wi-Fi,leftfrom 2 sim cards, not between + 3x4 grid + the connection / disconnect sound is muted
for Recovery - [attachment = "7645951: Centred _... t_6.2.18.zip"]


- correct display of Wi-Fi,on rightfrom 2 sim cards, not between + 3x4 grid + the connection / disconnect sound is muted
for Recovery - Centred_Clock_6.2.25.zip (1.85 MB)



- correct display of Wi-Fi,on rightfrom 2 sim cards, not between + 3x4 grid + the connection / disconnect sound is muted
NEW! for Recovery - Centred_Clock_6.3.11.zip (1.83 MB)

Centred_Clock_6.3.11_new.zip(1.84 MB)


Who is interested in a grid of switches 5x4 then you heretyts



1. Unzip the contents of the archive.
2. Take the MiuiSystemUI.apk file, and copy it to the / system / priv-app / MiuiSystemUI / folder with replacement.
3. Set rights (644)
4. Reboot the phone

Everything you do you do at your own peril and risk!
Before any manipulations the BACKUP is OBLIGATORY !!!



Post has been editedmaks1m1 - 18.03.16, 18:50

Owners of stock firmware v 7.1.8.0

I checked on my stock 7.1.8.0 Works. thankcombojianfriend from the Chinese forum.



Post has been editedilya0103 - 08.02.16, 16:14

Replacing icons in the status bar

We transfer the MiuiSystemUI.apk file to the / system / priv-app / MiuiSystemUI / folder with the replacement of the existing one.
We set the rights (644).
Reboot.


P.S. Did for myself, maybe someone else will need.
I express my great gratitudeH. Lepifor the help.

Post has been edited1glinka78 - 22.02.16, 11:56

It seems like RTH appeared for firmware v7.1.8.0 (even if your bootloader is locked)

Method 1
1. Downloading APK to your deviceRootGenius-2.2.82_general_pc (1) .apk(8.08 MB)

2. Install
3. Start and press the green button for rutting (the phone may reboot a couple of times)
4. Wait, rejoice and ENJOY! (if it didn't work out, then read method 2)

Method 2
1. Downloading the program to your computerRootGenius_chrome_3.1.1_setup (2) .exe(8.89 MB)

2. Install and run
3. [IMPORTANT!] Enable USB debugging on your device, then connect via USB cable to PC
!!!Make sure all the drivers are on your computer.
4. The program will determine your phone, press the green button and wait
!!!Your phone will reboot a couple of times,DO NOT REMOVE USB CABLE !!!
5. Wait, rejoice and ENJOY!

P.S. I did not test this method, so I can’t be 100% sure in its operation.

Post has been editedIMixI - 03.02.16, 19:24

Display a long contact name in 2 lines

patch for MR 7.1.8

What will happen:
Displays the name of the call in 2 lines (if long) for incoming / outgoing, in contacts and in the call log.

Put as usual - replacing files in folders and setting rights 644 (rw-r - r--).

How to do:
0) Do not forget about backup replaceable files
1) InCallUI.apkreplace in \ system \ priv-app \ InCallUI \InCallUI.apk
2) Contacts.apkreplace in \ system \ priv-app \ Contacts \Contacts.apk
3) We set the rights
4) Restart the phone

Files:
InCallUI.apk(1.04 MB)
Contacts.apk(4.15 MB)




Post has been editedmatt - 09.03.16, 07:46

Full flashtool firmware manual

1. First install driversfrom here.
2. Download the firmware forFLASHTOOLfrom the cap
3. Firmware and flash should be unpacked so that folder paths do not contain Cyrillic and spaces
The following steps will differ depending on which firmware you are sewing.


10 (8). Uncheck userdata if you want to save your data
11 (9). Click download
12 (10). Turn off the phone, hold down the volume (-) and connect to the PC.
13(11). Do not release the button until the yellow bar appears
14 (12). We are waiting until a window with a daw appears. We get the phone out of the PC. Turn on
P.S. The instruction is suitable for both weekly and stable firmware




Post has been editedloginmd - 30.06.17, 07:02

FOR THOSE WHO WORTH OF OF THE FIRMWARE BUT WANTS TO HAVE A RUSSIAN LANGUAGE IN THE APPLICATIONS

Install the driver from the header (Mi PC Suite). More on need adb platform-tools. More details can be foundhere. On the phone, turn on the developer mode (several times click on the phone information on the MIUI version), then go to the Additional settings - Developer options - switch the USB debugging switch
Go to Google play and download the application moreLangs
We connect the phone to the computer, go to the command line and prescribe


After that, the following will be displayed in the command line

A window pops up on the phone asking for permission to debug via USB. Click to resolve. after that we enter again the command which is higher
It should be in response to something like this

After that, enter the following commands in order


We launch the application that was downloaded from the market, after launching it will load all the languages ​​that it finds, look for your language and click on it

The phone will think for a second and all applications on the phone will be in Russian. Well, of course, all those who will download and install because The phone thinks that the Russian language is installed in the settings
translated become also several embedded ones such as browser, MI Remote
When you restart, nothing flies, updates all come and are installed.
From myself I can add that in the Mi PC Suite program there is a very useful wich. When connected via USB, all Internet traffic is taken from the computer by the computer, it may be useful for someone to know




Post has been editedmedlexa - 06.02.16, 16:39

Many questions about the "Russification" stock firmware.
The previous pages had a pretty good post on this topic. I will not supplement or correct. Just throw a link to the video.Installing Russian on android smartphone without ROOTlinks under the spoiler to the video.

Another way, but only on smarts with root:

The process of Russification itself comes down to entering a single line, but before that you need to make sure that the superuser privileges are allowed for ADB SHELL SU:

If we seethen everything is OK, we shove USB.
If not, then go to the phone and allow root rights for adb.
So. We have succeeded. We left root @ hennessy: / #
Here is the line that we need to enter in the command line from the "preparation" item:

After the reboot, we have the support of the Russian locale.
Check through adb shell

at the exit
ru

at the exit
Ru




Post has been editedilya0103 - 05.02.16, 23:56

I did not find roofing felts, there are no roofing felts anywhere, I had to turn off the BIP myself when the volume was changed, and make a separate slider for "alerts", if anyone needs it, for the multimode:
framework.jar(5.94 MB)

Settings.apk(14.34 MB)

It will be loaded for a long time, but it works :) tested on multi-mode 7.1.8.0

Install with any root explorer
framework.jar to put with replacement in / system / framework
Settings.apk put with replacement in / system / priv-app / settings

Thank you send toLepiandurix2003



Post has been editedYtm - 06.02.16, 19:02

Operator logos for MIUI6-8
Added from the archive of all operators, reformatted pictures for XIOMI REDMI NOTE 3 (pro, max, etc.) (in the format sim1 and sim2 (in folders identical for each sim) installation from under the program) or via rootexplorer (according to the instructions). EVERYTHING IS WORKING!


SimCardColorer_for_MIUIv7-6_March2016.rar(5.23 MB)


Post has been editedlegostaevdima - 21.01.17, 11:08