CPU: Intel Atom X5-Z8300 Quad Core 1.44GHz (up to 1.84GHz)
GPU: Intel HD Graphic Gen7
RAM + ROM: 2GB + 32GB
TF card: Up to 128GB
DualBoot system: Windows 10 and Android 5.1 systems
8 inch screen: 1280 x 800 WXGA IPS
Bluetooth 4.0:
HDMI output:
Gravity sensing system:

Android installation instructions

(This instruction is intended for those who killed Androyde on his tablet, but did not touch the dual loader)

ATTENTION!!! After installing Android, the Windonw 10 bootloader will be deleted on the tablet, according to the rule of the older system, which means you will also have to reinstall it. Before starting the procedure, make sure that you save all the important files from your tablet.


1. Prepare your PC for Android firmware.


2. Firmware tablet


After that, you can disconnect the tablet from the PC and wait for the final mood and install the OS, you can start working on the newly installed Android OS. And yes, it will be in Chinese, you will need to choose Russian in the language setting.

Download links:

Instructions how to rearrange windows
The instruction itself with screenshots here
1. Download the file from here (Files) X80 Plus-Win10_20160108.rar and just in casehttps://mega.nz/#F!lRo...vBDmpQy7L6HO3sHtuOYEkw
2. We are looking for a flash drive (from 8 gigs) and format it as shown in the screenshot (Fat32 required) and write "WINPE" (without brackets and in capital letters)

3. Open the X80 Plus-Win10_20160108.rar archive and copy the contents of the X80 Plus-Win10_20160108 folder to the USB flash drive. (you can immediately copy the driver to a USB flash drive)
the final view should be like this

4. Turn off the tablet completely
5. Through the OTG cable and hub, connect the keyboard and USB flash drive.
6. Turn on the tablet, and as soon as the screen backlight appears, press ESC, then you get into the BIOS.
7. In BIOS, select the boot from the flash drive (instead of the highlighted one, the name of your flash drive will be)

8. And installation of windows will go (there will be such an image)

9. When the installation will be completed like this

10. Reboot the tablet, and select windows in dualbook, the installation will go on (user name, etc.)
11. All you have installed a full-fledged Windows, if the firewood did not roll themselves, set from the archive above.
12. Like everything, maybe I missed something (as I write more from memory)


Add-on to install Windows.


This addition applies only to those who install Windows OS after mashing the native bootloader (this usually occurs after installing / reinstalling Android). If you turn on a tablet like this:

then you need to do everything without this add-on, but if you do this:

then you must install with this add-on.


As indicated in the instructions in step 7, you enter the BIOS by pressing the Esc key, select the Save and Exit menu (as indicated on the screenshot in the instruction) your flash drive, boot from it and ...

BLUE SCREEN (he is the screen of death)

Do not scare and do not panic !!!

So it should be, we wait until the tablet reboots and as soon as it starts to turn on again with the Esc key, we enter the BIOS and select the boot from our flash drive.
The tablet should go into the reboot and not start loading from the flash drive, but the Teclast logo should appear, again press Esc and enter the BIOS, select the boot from the flash drive and start booting from the flash drive and installing the system!

The author of the text is not responsible, everything you do, you do at your own peril and risk!

Fix time changing after switching between Android and WIndows

If your time in Windows changes after loading Android and back to Windows: I suggest fixing this.

1. Run regedit.exe. Located (C: \ Windows \ regedit.exe)
2. Open this pathHKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ TimeZoneInformation \
3. Right-click on (TimeZoneInformation ) - select - Create ->DWORD value (32bit),
4. New parameter rename toRealTimeIsUniversal
5. Double-click to openRealTimeIsUniversal and change the RealTimeIsUniversal key value with ( 0 ) on ( 1 ).
6. Set the current time and time zone in hours and reboot the system, check the time (correct if necessary for the correct last time)))
7. Reboot to Android, then back to Windows and check your time again.


If you did everything right, your time after these procedures will remain unchanged.
Or apply this Fix from Teclast x80h.
fix_windows_time.reg(153 bytes)



The instruction is writtenvit900, for which he thanks a lot !!!
Original instructions locatedhere.

Made a root for the versionAndroid 1.06 X80 + Plus + Android5.1-V1.06_root.zip (12.05 MB)


You can see the version of your Androyd in the settings ->About tablet ->Build number. v.1. ***

Mini instruction

1. Turn off the tablet completely
2. Turn on, when choosing a system, we poke a finger to any place, throwing off the countdown
3. Hold the volume down (hold), select the boot from the android, click OK, boot into fastboot (a picture with a green robot will appear)
4. Unpack the downloaded archive to drive C. Open the cmd "Windows" console and go to the directory
5. Execute the command

Having this (it means everything went well)


6. Click the power button and boot into android
7. We drop on the tablet and install the second file "me.phh.superuser_1033.apk"
8. Congratulations, you now have a root: yes2:

I want to say thanks to the userNeKit1000for advice in a pair of those. questions;)

Trying to put a super su not advise.

There is already a ready working twrp recovery, I'll post it soon

Instruction courtesy of the userJohn_66, for which he thanks a lot !!!

Improved archive to get RootfromGadzila

Our Chinese friends will release an update for BIOS.
The update arrives by air
After installing the update, the hidden sections of the BIOS will be unlocked, I do not recommend changing anything there, if you do not understand it, otherwise you will be taken to the programmer and BIOS firmware!

Before installing, I recommend fully charging the tablet, use only the ten that came with the tablet or was installed from the original one laid out in this topic.
I also recommend making backup of the current BIOS from under the loaded dozens on the tablet itself: yes2:


Here is here manual in Chinese (need to register to see pictures)
I attach the original in pdf also in ChineseBiosUpdateX80Plus.pdf(1018.65 KB)


Before the start of all actions!
Disable all installed antiviruses!
Disable Windows Firewall!

I do not bear any responsibility for all your further actions!
A small instruction in Russian. Parts of the images are not there, but I think you can guess where to click, if that is what you are checking with the Chinese instructions.

For those who wish, I propose an additional USB port. + 5v from the tablet board will not pull the HDD but with a mouse or a flash drive will cope completely. I connected the mouse, keyboard and HDD
through the hub with external power - everything works (On the hub, disconnect 5v from the connector to the port of the tablet). Resistors can be unsoldered to the board, but easier to hang on the USB connector.
Resistors 15k can not be set.





Instruction courtesy of the uservpch07, for which he thanks a lot !!!