Assistant
REPLY |
Blackview BV5000 - Firmware |
Message#2 18.11.15, 17:22 | |
ARTIFICIAL INTELLIGENCE [offline] Group: Friendssavagemessiahzine.com Messages 9953 Check in: 15.10.12 Samsung Galaxy A8 + (2018) SM-A730F Reputation: 3489 | FlashTools firmware manual 1.Raspakte FlashTools to your computer, run Flash_tool.exe. 2. Select MT67хх_Android_scatter.txt from the folder with the firmware in the column Scatter-loading file. 3. Wait for the file to be added to Flash Tools. 4. Go to Settings (Option) - Connection - USB Speed - Select High Speed (usually everything is by default). 5. Select the option Firmware Upgrade (to install the full firmware with all the checkmarks), or Download only (to install the individual sections of the firmware). 6.Turn off the phone by pressing the "off" button, or distort the battery. 7. Press the Download key. 8. Connect the switched off phone to the computer via USB cable. 9. The process will start, there will be purple, yellow stripes in FlashTool and at the end of the installation a green circle. 10. Ready! 11. Now you can safely disconnect the phone from the computer and turn it on by pressing the "power" button. Post has been editedDestrooktor - 07.02.17, 19:36 -------------------- Ignorance - no argument. Ignorance - not an argument. |
Message#3 18.11.15, 17:30 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 798 Check in: 11.03.10 Reputation: 47 | Cton installed Xposed Installer? |
Message#4 18.11.15, 17:48 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 198 Check in: 24.12.13 Reputation: 13 | I tried a lot of all sorts, while everything was unsuccessful |
Message#5 18.11.15, 18:17 | |
ARTIFICIAL INTELLIGENCE [offline] Group: Friendssavagemessiahzine.com Messages 9953 Check in: 15.10.12 Samsung Galaxy A8 + (2018) SM-A730F Reputation: 3489 | dx121, People put this® Xposed (Post Alex0047 # 39215627) In particular, it works on the Bluboo X550. I still have nothing to check for anything. So either yourself or expect. -------------------- Ignorance - no argument. Ignorance - not an argument. |
Message#6 18.11.15, 20:29 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 198 Check in: 24.12.13 Reputation: 13 | And this one does not go. I will try again on the new device. And I will post a photo tried while the brick got Post has been editeddx121 - 18.11.15, 21:21 |
Message#7 18.11.15, 21:20 | |
ARTIFICIAL INTELLIGENCE [offline] Group: Friendssavagemessiahzine.com Messages 9953 Check in: 15.10.12 Samsung Galaxy A8 + (2018) SM-A730F Reputation: 3489 | Install TWRP Recovery: Using the Flash Tool 1.We download and install the USB Driver (it may be necessary to disable driver digital signature verification). 2. Download the Flash Tool and unpack it to the root of drive C. 3. Download the archive with Recovery and unpack it into any folder without Chinese, Russian and other non-Latin characters on the way. 4. Run the SP Flash Tool. Further, all actions are carried out in it. 5. Click File.>Open Scatter-loading file ... and select the MT6732_Android_scatter_emmc.txt file from the recovery folder (point 3) 6. Press the Download button and answer Yes to the question. 7.Connect the phone off. 8.If everything is correct, the red status bar will run first, then the violet, yellow and a green circle will appear, indicating the success of the operation. 9. Turn off the phone, take out the battery for 30 seconds, insert it back and use it. 10.Login to Recovery: Turn on the device with a combination of buttons Volume up + Power. Installation via ADB Download and install the Android SDK, including the Android SDK Tools, Android SDK Platform tools and the Google USB Driver Unzip the file Recovery.img from the archive Rename it to twrp.img and copy to the root of the SD card of your device Connect your device to the computer via USB Run the Windows command prompt by typing "cmd" in the "Run" field in the "Start" menu In the window that opens, enter "cd C: \ android-sdk-windows \ platform-tools \ adb" Enter the following lines: su dd if = / sdcard / twrp.img of = / dev / block / mmcblk0p34 Reboot device Install TWRP without a PC Post has been editedDestrooktor - 07.01.16, 09:55 -------------------- Ignorance - no argument. Ignorance - not an argument. |
Message#8 18.11.15, 22:06 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 336 Check in: 13.09.07 Reputation: 16 | I tried to install the same Xposed Installer, when installing it in TWRP I wrote an error, I tried 3 different options that worked for me on another device, but the same 64%, though 5.0 stood. I did not receive a brick, however, I can have such a device, I, without thinking, managed to pour TWRP from another device, and didn’t come into rekoveri, but it worked ...: rofl: -------------------- in reality, it's not at all like it really is ... |
Message#9 18.11.15, 22:34 | |
ARTIFICIAL INTELLIGENCE [offline] Group: Friendssavagemessiahzine.com Messages 9953 Check in: 15.10.12 Samsung Galaxy A8 + (2018) SM-A730F Reputation: 3489 | If anyone has a desire to still test Xposed Installer, then you can also download them and try installing yourselfBluboo X550 - DiscussionLies in the section "Firmware, Route, Recovery". They also write "working Xposed", you can see the problem for everyone like that. Post has been editedDestrooktor - 18.11.15, 22:34 -------------------- Ignorance - no argument. Ignorance - not an argument. |
Message#10 18.11.15, 22:36 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 198 Check in: 24.12.13 Reputation: 13 | Body recovered, I'll try again tomorrow If anyone has a desire to still test Xposed Installer, then you can also download them and try installing Bluboo X550 yourself - The discussion is in the section "Firmware, Route, Recovery" They also write "working Xposed", you can see the problem for everyone like that. I tried from there, did not work Post has been editeddx121 - 18.11.15, 22:38 |
Message#11 18.11.15, 22:53 | |
ARTIFICIAL INTELLIGENCE [offline] Group: Friendssavagemessiahzine.com Messages 9953 Check in: 15.10.12 Samsung Galaxy A8 + (2018) SM-A730F Reputation: 3489 | dx121, And which version did you install 32 bit or 64 bit? We have 32 bit firmware.Must install 32 bit from this post ® Xposed (Post Alex0047 # 39215627) Post has been editedDestrooktor - 10.03.17, 14:02 -------------------- Ignorance - no argument. Ignorance - not an argument. |
Message#12 19.11.15, 07:53 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 198 Check in: 24.12.13 Reputation: 13 | It was from this post that I installed the apk file and rolled 32 bits through the recovery, custom recovery from the header. 64 bits are not set, error gives Post has been editeddx121 - 19.11.15, 07:54 |
Message#13 19.11.15, 12:53 | |
ARTIFICIAL INTELLIGENCE [offline] Group: Friendssavagemessiahzine.com Messages 9953 Check in: 15.10.12 Samsung Galaxy A8 + (2018) SM-A730F Reputation: 3489 | Backup and restore NVRAM using the SP Flash Tool What is NVRAM Theory: So section/ dev / nvramIt is stitched at the factory and all further official updates and firmware do not even dare to touch it. No matter how the program part changes, it remains unchanged. In rare cases, the manufacturer makes changes to it, and releases firmware for service centers, including this section. In the working system IMEI, MAC addresses of Wi-Fi and BT are on the way/ data / nvram. And to be more precise, in / data / nvram / md / NVRAM /. The / data / nvram directory is created when the device is first started by copying the contents of / dev / nvram into it. The recommendation to save the / data / nvram folder for recovery in the future is widespread. This, of course, is true, as are calls for backup in principle. But restoring / data / nvram will not return the contents in the / dev / nvram block. What should be done in order to avoid problems in the future: You need to create a complete memory dump of the device. It is recommended to do this immediately after purchasing the device. Depending on the dump method, among other files there must be a nvram.img file (nvram.bin). It is the image whether it is .img or .bin size 5242880 - and there is an image of the necessary section. Any nvram.tar and other ext4 are copies of / data / nvram and are of no interest. Make backup nvram using MtkDroidTools (SP Flash Tool) and restore it in case of anything. Other ways to restore IMEI (through the engineering menu, Mobileuncle Tools, etc.) are temporary, until the first flashing or reset to factory settings. What is necessary 1. Installed ADB drivers on the PC. 2. SP Flash Tool. 3. Scatter file with Blackview BV5000 stock firmware. Create Backup 1. Open the SPFlashTool application. 2. Press the Scatter-loading button. Select the scatter file from the factory firmware for your device under the SP Flash Tool. 3. Open the ReadBack tab and click the ADD button. 4. Click on the line that appears, then select the folder where the backup will be stored and set the file name:nvramand click save. 5. In the next window fill in the fields: start adress: 0x380000 length: 0x500000 6. At the top, press the Read Back button and connect the switched off smartphone to the PC. If you did everything correctly, the bars will run down the bottom of the screen and the message “OK” will appear, after which the application can be closed. Backup Recovery 1. Open the SPFlashTool application and download the scatter file. 2. Click on the line with the name NVRAM and specify the path to the previously created file. 3. Above should be selected - Download Only. 4. Press the Download button and connect the switched off smartphone to the PC. Detailed instructions for restoring NVRAM using the SP Flash Tool Post has been editedDestrooktor - 28.12.16, 15:12 -------------------- Ignorance - no argument. Ignorance - not an argument. |
Message#14 19.11.15, 14:30 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2957 Check in: 30.10.12 Huawei P20 Lite ANE-LX1 Reputation: 1975 | In the header of the old Flash Tool v5.1352.01.rar SP Flash Tool v5.1520 and higher recommended for MT6735 Latest Flash Tool |
Message#15 19.11.15, 16:42 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 91 Check in: 20.02.09 Blackview BV5000 Reputation: 7 | N.B. I understand, the device has not come yet ... but it seems to me that there is no such device ... I think our recovery is: # ls -l /dev/block/platform/mtk-msdc.0/by-name/recovery lrwxrwxrwx root root 2015-11-19 11:20 recovery ->/ dev / block / mmcblk0p8 but there is no 34th: # ls -lR / dev / block | grep 34 # M Check outForum Rules! 4.7.1. When answering an existing topic, try to formulate your question or answer so that it is understandable to the other forum participants. Avoid flooding, philosophizing, lyrical digressions. Post has been editedolegusss - 19.11.15, 23:49 |
Message#16 20.11.15, 09:10 | |
ARTIFICIAL INTELLIGENCE [offline] Group: Friendssavagemessiahzine.com Messages 9953 Check in: 15.10.12 Samsung Galaxy A8 + (2018) SM-A730F Reputation: 3489 | How to install drivers on Windows 8 / 8.1 Who does not install drivers on WIN8, we do this: mouse right (gear-parameters) \ change computer settings \ general \ special boot options \ restart now further - diagnostics \ additional parameters \ boot parameters \ reload the computer reboots and a bunch of options appear ..... Flick F7 the computer restarts again with the driver signature verification disabled and then we start installing the drivers. Installing unsigned drivers in Windows 8.1 Windows 8.1 blocks the installation of drivers without a valid digital signature (or modified after its application). This is done for security reasons, since installing unsigned drivers or tampered with (possibly using a virus) can lead to unpredictable consequences, even before reinstalling the system. A signed driver is a device driver that is digitally signed. A digital signature is an electronic security label that can indicate the publisher of this software, as well as the fact that the driver has changed after being signed. If the driver is signed by the publisher and the authenticity of the signature is confirmed by a certification authority, then you can be sure that the driver is released by this publisher and has not been changed. Install the driver without a digital signature or not. In this case, it all depends on what you need to install unsigned drivers. If you need to install drivers for an old device, such as a scanner, you can temporarily allow the system to install unsigned drivers. To temporarily disable driver digital signature verification, do the following: 1. Move the cursor to the lower right corner of the screen, select the item "Parameters" or press the keys Win + I. Press the shift key, and while holding it down, select Shutdown and Restart. Reboot selection 2. After rebooting in the drop-down menu, select "Diagnostics" Extra options 3. In the "Diagnostics" select "Advanced options" Extra options 4. In the "Advanced Settings" window select "Download Options" Boot options 5. In the "Download Options" click "Reload" Reload 6. Now the most important thing. In the "Download Options" window, select the desired key, in our case it is F7 or the number 7 Safe mode The next system load will be already without checking the digital signature of the drivers. You can install the necessary drivers. At the next system reboot, the system of blocking unsigned drivers is automatically activated. The previously installed unsigned drivers will continue to work. Post has been editedDestrooktor - 07.01.16, 09:56 -------------------- Ignorance - no argument. Ignorance - not an argument. |
Message#17 20.11.15, 18:08 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 277 Check in: 23.09.10 LeEco Le Pro 3 AI 4/32 Reputation: 16 | |
Message#18 20.11.15, 18:49 | |
ARTIFICIAL INTELLIGENCE [offline] Group: Friendssavagemessiahzine.com Messages 9953 Check in: 15.10.12 Samsung Galaxy A8 + (2018) SM-A730F Reputation: 3489 | P $ ychoSoci @ L, In principle, 6 LEWA on android 4.2 was more than less tolerable. But on Android 4.4 this is already a problem. I ported them all to myself. But so he did not gain popularity because of his glitch. If the Chinese do on 5.1, then it is quite possible and I will try. Firmware worthy. Post has been editedDestrooktor - 20.11.15, 18:50 -------------------- Ignorance - no argument. Ignorance - not an argument. |
Message#19 21.11.15, 02:14 | |
- Where are you? - Everything is there! [offline] Group: Banned Messages 17134 Check in: 24.09.07 Oneplus 3 Reputation: 2770 | M We move to subsection� Other brands �. -------------------- NitrogenOS 9 PIE World soldiers memorized literally The only paragraph of the world statute: Observe only one law. Who is stronger is right! ©What happens to the curators? |
Message#20 21.11.15, 04:42 | |
ARTIFICIAL INTELLIGENCE [offline] Group: Friendssavagemessiahzine.com Messages 9953 Check in: 15.10.12 Samsung Galaxy A8 + (2018) SM-A730F Reputation: 3489 | Instructions for obtaining root rights from custom recovery 1. After installing custom recovery, take the phone in your hands and load it into recovery mode. To do this, with the device turned off, hold down the sound increase button and the power button and hold this combination until the device boots into recovery mode. 2. After you got into TWRP Recovery do the following: Install zip Select the zip SuperSU archive that we copied to the device’s memory before, install it Reboot System 3. After installing the zip archive from recovery and boot the device. Find among the installed applications a new one (installed with the zip archive) calledSuperSU. Turn on Wi-Fi on the device and run this application. If you are prompted to update the binary file, then agree to update the normal way. 4. After the upgrade, you will receive a full root. Post has been editedDestrooktor - 08.02.17, 19:22 -------------------- Ignorance - no argument. Ignorance - not an argument. |
Message#21 21.11.15, 09:01 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 434 Check in: 11.09.11 Leagoo KIICAA Power Reputation: 19 | Alternative way to get Root Post has been editedArthurios - 28.11.15, 09:08 Reason for editing: in the header -------------------- What's in a name? |
mobile version | Now: 01/05/19, 14:14 |