> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Zuk Z1 - Official firmware



Rep: (12)
Zuk Z1 - Official firmware
PictureZuk z1, Lenovo Zuk z1
Description | Discussion пїЅ | Purchase пїЅ | Accessories пїЅ | Marriage and Repair пїЅ | ZUI firmware translation пїЅ | ZUK Owners Club пїЅ | power usage пїЅ | Unofficial firmware пїЅ | Official firmware пїЅ





Picture

Important information!
Before you do anything and ask!




Dear friends, you need to try a universal pill before you panic.
To takethisfirmware and flash byof this instructionor bythis video



Drivers and Utilities

Firmware

Recovery

Instructions

miscellanea

Reviews on firmware

Survey Screenshots
Attached Image



There is no curator in the subject. For questions about filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.

Post has been editedderak1129 - 08.06.20, 19:08
Reason for editing: Notification.



Rep: (1)
Amraz @ 07/28/2016, 19:34*
with bullet speed))

Sarcasm?)



Rep: (96)
I want to roll ZUI 2 on Cos Stock. How safer to make for the scanner, something else))



Rep: (761)
Renatique @ 07/28/16, 20:24*
I want to roll ZUI 2 on Cos Stock. How safer to make for the scanner, something else))

The death of the scanner from the firmware is 99% coincidence.



Rep: (96)
Do Windows 10 do not put drivers? Even the installation does not start immediately error (sorry. And through the drain Cayen Recovery can be reset to make but only the firmware without affecting Storage?

Post has been editedrenatique - 28.07.16, 21:01



Rep: (432)
Drelargon @ 07/28/16, 20:17*
Sarcasm?)
Drelargon ,
It depends on how to perceive, I thought about humor)): offtopic:



Rep: (188)
Post is not updated. Beetle sold.

My experience of using firmware

Smart is used with one SIM card, with LTE, Wi-Fi and GPS on all sources.
Mark "(not updated)"I put if the firmware has not been updated during the month.

AICP
6.0.1 (not updated)
11 dated 04/15/16: Multiple reboots at the first setting, some buns in the design settings, the touch button works.
7.1.1
12.1 dated 07/11/17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

Aim (not updated)
7.1.2
1.0 dated 09.06.17:

AOKP (not updated)
7.1
from 01/28/17: many settings, but they are not translated. It does not enter the screen settings, immediately crashes. Not always come notifications. Volume jump, if listening to music in contact and block the screen. Rattling spoken speaker.

AOSGP X
7.1.2
2.1.1 dated 08/08/17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

AOSiP
7.1.2
6.2 dated 07/11/17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

AospExtended
7.1.2
4.2 dated 05/24/17: The settings are hiding when you go to the mobile data settings. Autonomy Standard 5-6 hours of screen. In general, the firmware liked.
4.4 dated 07.07.17:

AOSP-CAF (not updated)
7.1.1
from 04/07/17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

Beanstalk (not updated)
7.1.2
1.0 from 06/06/17:

Bliss (not updated)
6.0.1
6.4 dated 08/17/16: Very many settings are not translated, there is a rattling of the conversational speaker. Standard autonomy indicators.
6.4 from 09/15/16: The scanner works with all scenarios. The rattling of the conversational dynamics has been preserved.

Candy
7.1.1 (not updated) by neohack
2.7 dated 02/16/17:
7.1.2 by jyothish1231
5.1 dated 07/13/17:

Carbon (not updated)
7.1.1
CR-5.1 dated 09.04.17:

Citrus caf (not updated)
7.1.1
3.1 from 03/30/17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

CM 13 (not updated)
6.0.1
From 18.08: Standard autonomy. A couple of times it was noticed to the rattling of spoken speaker. With a low charge, applications are discharged from memory, even if they are launched only 2.
from 20.08: Interlocutors complain about bad hearing, perhaps a problem in the operator.
from 12.09: everything is fine. No rattling. Applications do not seem to be unloaded.
From 24.09: The first starting system occurs with the Music Application Error. There is no vibrootchkalklik when unlocking a smartphone with a fingerprint.
dated 04.12: Since last nightie with the adaptive brightness adjustment enabled, if you adjust the brightness of the slider, then it does not adjust the brightness to half the brightness, only after half starts to adjust something. If adaptive to turn off, the brightness is adjustable from the very beginning of the slider. Colors Yes, have become more common. The last 10% of the charge is spent very quickly.Autonomy 10.5 hours of Screen .
20160418-SNAPSHOT: Stable work, smart sleeps well at night with all the programs (more than 65).

COS 12.1. (not updated)
5.1
Yog4paS9ig: The touch button works only when you press, the bug with sound after unlocking and pulling the curtains decided using the disconnection of the stock musical and Cyanogen services. The autonomy results are one of the best: 6.5 hours of the screen on LTE. In general, the firmware is stable and suitable for everyday use. Recommend.

Cosmic Os
7.1.2
1.4 of 28.02.17: Customization settings are, but they are not translated. The sound on the video is written as stripped as on resurrectionremix 5.8.1 of 08.02.17. Standard launchers are not costized (the search string and date is not removed). I do not see the point in further testing.
2.0 from 03.07.17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

crDroid
6.0.1 (not updated) By Ordenkrieger.
from 02/13/16: many buns and a lot of not translated, the touch button works.
7.1.1 (not updated) by neohack
2.0 dated 01/18/17: If you set the power on the power saving to the battery icon in the curtain, then click on it, and after a couple of seconds, you repeat the procedure, then the phone reboots with longitudinal green stripes through the entire screen, then the image begins to twitch. Helps the screen lock and unlock. When listening to music in contact when the screen is blocked, the volume jumps. Such a bug was COS 12. Sometimes unlocking the fingerprint is stopped.
2.2 dated 02/13/17:
7.1.1 (not updated) by bigbing.
7.1.2 by Anush12133
3.5 dated 07/11/17: no hang, only during the video is freezing the camera. Autonomy Something 5 hours of screen. There was a spontaneous reboot.
3.6 dated 29.07.17:

CypherOS
6.0.1 (not updated)
2.4.3 of 20.08.16: Very many settings and many of them are not translated. At that time, there are no settings for buttons and curtains with switches. Oversion and reboot interface after working with optional settings. Very low autonomy - 4 hours of screen.
7.1.2
4.0.5 of 07/03/17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

Darkness
7.1.2
2.0 dated 19.07.17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

Dirty unicorns
6.0.1 (not updated)
10.4 dated 07/13/16: Standard for Castoma Twivique set, smooth operation. Overnight ate only 1% of the battery on pure smart (without prog). Minimum set of standard software. From the bugs noted the twinkling display when blocking. He swears, lights up for a split second and goes out again. It is also impossible to install the widget in a dense to the top of the screen (as if the place is reserved by the search for Google, but even if it is installed, then the place remains free). Autonomy standard - something for 6 hours of screen.
10.5 dated August 7, 18.16: the flickering of the display profixyli, the top of the screen does not occupy the same (solved by installing a third-party launcher). Problems are observed in some applications associated with GPS (the application requests it to enable, although it is enabled).
10.5 dated 12.08.16: The screen continues to flicker when blocking (not always). I do not observe problems with GPS.
7.1.2
11.5 dated 07/11/17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

Discovery ROM
7.1.2 (not updated)
RC3-D1 from 06/15/17:

Firehound (not updated)
7.1
7.1 dated 04/13/17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

HalogenOS
7.1.2
from 07/07/17:

HexagonRom
7.1.2
2.5 dated 07/10/17:

Lineage mos (not updated)
7.1.1
Beta5.0 from 06/06/17:

LineageOS
7.1.2
14.1 dated 07.25.17:

Mokee
6.0.1 (not updated)
MK60.1 dated 07.26.16: The touch button does not work on touch, it looks pleasant, asking donat for access to OTA, the music application does not start.
MK60.1 dated 09/26/16: The scanner works on touch only when unlocking. In general, the firmware was satisfied, because The phone sleeps relatively well and does not overheat. Autonomy indicators Standard - about 6 hours of screen. Updated on OTA.
MK60.1 from 10.10.16: The system does not start if you install a patch for the sensor.
MK60.1 from 10/25/16: In general, the system is stable. Autonomy standard.
7.1.2
MK71.1 NIGHTLY dated 16.01.17: When you first download, the screenshot does not work. You need to install Radioactive Kernel. I believe that the test result will be the same as in resurrectionremix 5.8.0. When used in 90% Wi-Fi mode and 10% LTE, it was possible to squeeze 7 and a half hours of the screen. I did not like: the quality of the receipt of the signal, the volume of the spoken speaker, heating during a weak load.

NamelessROM (not updated)
6.0.1
3.0 from 3.08.16: Permanent interface dumps, the button does not work on touch.
3.0 dated 20.08.16: The interface is not falling off, the scanner works on a touch only when unlocking. The device sleeps well. Autonomy standard. There is a rattling of spoken speaker.

NucleaRom
6.0.1 (not updated)
2.1.8 dated 02.08.16: A mediocre tweak set (on the one hand, this is a plus - do not soar about the thin interface settings), the touch button works, the density of pixel 400 and set the standard value is not possible. By autonomy Something squeezed 6 hours of screen. With some calls there is a distortion of sound (rattling).
2.2.4 dated 08/16/16: Autonomy is all standard, rattling profixyli. Many interlocutors complain that I am poorly audible.
2.3.1 from 08/26/16: Viper does not work. Starting with this version, SuperSU cannot be installed, otherwise the eternal load.
2.3.3 from 09/06/16: Viper still does not work.
2.3.4 from 09/08/16: I understood why Viper did not work: because SuperSU is not installed, then SELinux has not been translated into Permissive mode. Translated in manual mode and everything worked. Rass a conversational speaker. The interlocutors complain that I am poorly audible.
2.3.9 from 09/30/16: The scanner works with all scenarios, the interlocutors complain that I am poorly audible.
3.0.0 of 11/18/16:
7.0 (not updated)
1.0.6 of 20.10.16: The scanner works with all scenarios. Autonomy Average - about 6 hours of screen. Does not enter the phone settings. Battery indicator only in a vertical position.
7.1 (not updated)
1.0.4 of 11/11/16: Autonomous 4 hour of screen. The interlocutors complain about poor hearing.
1.0.6 dated 11/17/16: In the inactivity mode, the autonomy is good, but when active use is actively spent. All interlocutors complain that I am poorly audible. The main function of the phone does not work.
7.1.1 (not updated)
1.4.0 dated 19.01.17: Autonomy on the mobile Internet about 5 hours of the screen, a conversational speaker is a bit rattling on the maximum volume. Several spontaneous reboots.
1.6.4 of 03/26/17: Autonomy mediocre. 6 hours of screen, despite the fact that 70% of use was through WiFi. With low loads, heats up significantly. I believe that the case is in the kernel. Many interlocutors complain that I am poorly audible.
7.1.2 (not updated) by Martinjesus23.
2.1.0 dated 04.06.17: For half of the day, smart spontaneously rebooted 8 times. It is impossible to use smart.
2.1.2 dated 11.06.17:
7.1.2 By Acuicultor.
2.1.5 dated 07/16/17: Autonomy within 4.5 hours. Several spontaneous reboots. Camera hangs.


OwnROM
7.1.2
4.0 dated 07.26.17: Autonomy 4.2 hours, the camera does not freeze, the additional settings are not translated. Spontaneous reboot.

Pure nexus
7.1.2
07/11/17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

ResurrectionRemix
6.0.1 (not updated) By Ordenkrieger.
5.7 dated 06.23.16: Ability to configure processor frequencies, many personal settings, the touch button works, Doze mode. When configuring the interface via extended settings, interface reboots occur, apparently for use, on other firmware did not notice this. When choosing an OTA update, an error message popped up. During the day of use of the screen, it was enough for 5.5 hours.
5.7.3 dated 08/09/16: The interface reboot was only one time. Some applications requested tracking on all sources, although in the settings this parameter was set. Similar with the last firmware autonomy indicators. GPS does not work.
5.7.3 from 11.08.16: GPS works, the interface continues to restart when working with advanced settings. Very low autonomy (possibly due to gapsami). In the battery graph, the network signal is indicated as bad, although the connection is complete. The scanner works with all scenarios.
7.1.1 (not updated) By Ordenkrieger.
5.8.0 from 05/01/17: Touch screen does not work. It is solved by installing RADIOACTIVE KERNEL. The battery icon from the Status Bar regularly disappears. Autonomy of about 6 hours of screen. I liked working with multitasking. The network catches a little worse than cm 13.
5.8.1 dated 08.02.17: ZUM does not work in the camera in video recording mode. Sometimes hangs the camera. In general, I liked the firmware with my ideal balance of a large number of settings and stability. Autonomy standard. Writes a terrible sound on video. Such a feeling that noise problems.
7.1.1 (not updated) by ankurpandeyvns.
5.8.2 dated 03/23/17: It has Ra Kernel. In general, stable firmware. Autonomy standard. The camera also removes not very.
7.1.1 (not updated) by bigbing.
7.1.2 by ankurpandeyvns.
5.8.3 dated 21.04.17: We returned the original kernel. Swipe disappeared on the button.
5.8.3 dated 05/15/17: The interface hangs several times and once the smartphone itself, it is simply unlocked (only the button illumination lights). Spontaneous reboot.
5.8.3 dated 07.07.17:

Slimrom
6.0.1 (not updated) by neohack
0.10 from 19.08.16: few settings and those not translated, the sensor does not work on touch.
1.3 of 09/22/16: With the settings, everything is the same. The scanner works on touch only when unlocking. Sometimes the interface hangs at the desktop output, or rather everything disappears. I think this is the problem of the built-in launcher, because With Nova Launcher there are no such problems. Very low autonomy indicators. The phone overheats.
1.7 dated 10/16/16: the phone is also heated during operation. If you install with a sensor patch, the system does not start.
7.0 (not updated) by neohack
0.1 from 10/19/16: Swiles and tapes on the sensor work. The battery percentage is displayed. From the bugs while noted only small interface pickers during disabling applications from the settings. Sycart settings do not work. Sometimes in a simple phone heats up. Low autonomy is about 4 hours of screen.
7.1 (not updated) by neohack
0.1 dated 11/16/16: Everything works. There is no strong heating. When viewing yout, there is a strong discharge. Autonomy an average of 5.5 hours of screen. When you press the power button, there is no reboot button.
7.1.1 (not updated) by neohack
0.11 dated 02/13/17:
7.1.1 (not updated) by bigbing.
7.1.2 by jyothish1231
1.0 dated 04.07.17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

Team OctOs (not updated)
7.1.1
From 10.06.17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

Temasek (not updated)
6.0.1
9.7 of 07/04/16: Many buns and complete translation, the sensor works. Could squeeze 7 hours of screen with a reduced frequency of the projects to 1200 MHz. The second day of use showed 6 hours of the screen without lowering the processor frequency. Smart was used for social calls, calls and navigator (they used to a greater extent). With some calls there is a distortion of sound (rattling). Apparently work applications from Google, although workers' gaps.
10.1 dated 07.25.16: The best autonomy indicators that I got - 7.5 hours of the screen almost with permanently enabled GPS. Google applications work. The rattling of the conversational dynamics has been preserved.

Tesla (not updated)
7.1.1
3.5 dated 01.27.17:

Tipsy (not updated)
7.1.1
4.9 of 03/13/17:

UNOFFICIAL CM 14 Romodelas1 (not updated) , 2 (not updated) , 3 (now unofficial lineageos)
7.1
From 10/18/16: You can not change the display of the battery in the status bar. In the application menu, some shortcuts are crooked. Many settings are not translated.

Unofficial LineageOS (not updated)
7.1.1
From 30.01.17: Sometimes the conversational speaker is rattling at maximum volume. Once hard hovel when entering applications.

Validus (not updated)
7.1.1
13.9 dated 04/02/17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

ViperOS
7.1.2
2.1 dated 07/14/17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

XenonHD (not updated)
7.1.2
06/09/17: It has Ra Kernel. I believe that test results will be 99% similar to Nuclearom.

XOSP
7.1.2
Release 7 Revision 2 dated 03.06.17: SuperSU is not installed. The shell on an amateur. Ra Kernel. Normal firmware.
dated 09.07.17:

XPerience ROM (not updated)
7.1.1
11.1.1 of 03/19/17:

ZUI CAPTAINEMO'S MOD
6.0.1
2.0.080 ST: Sleep mode is very good. Location definition problems. The same GPS Test is not started. Widgets on the desktop are not updated. The forum has already postedTablet.
2.0.080 ST V2: Not updated and widgets are not started after reboot.
2.3.045 ST: For normal operation of application notifications, it is necessary to make many manipulations with the settings. The approximation sensor does not work during the call. No information is displayed during an incoming call. You can only answer the call using the headset. Average autonomy - 6 hours of screen.
2.3.045 ST V3 +Maud: The location in the room and the window is not determined at all, only in the open sky. Autonomy Some of 6 hours of screen. When talking through a loud connection, I did not hear the interlocutors. After the conversation is completed, the screen does not turn on. Very uncomfortable to switch between running applications. Notifications come from all applications.


Andy kernel
Radioactive Kernel (not updated)
Starcity Kernel.


The firmware that I studied just a couple of hours and for various reasons did not want to continue the tests:

Turbo rom (not updated)4.0 06/29/16: Half settings are not translated, a variety of settings including processor frequency settings as in resurrectionremix.
CandySiX (not updated)
6.0
3.2 dated 08/16/16: The system does not start. Application optimization occurs and long loading, then everything is repeated.
3.2 dated 09.26.16: Finally, the system started. Mobile Internet does not connect, many settings and they are not translated. The scanner works on touch only when unlocking.
7.1
0.1 dated 11/17/16: Sycart settings do not work. Nothing heard when calling. The call itself passes.
Flyme
5.1.11.4R BETA: Contacts from Google are not synchronized.
6.7.6.23R BETA from 06/30/17:
Zui Multilanguage. (not updated)2.3.045 V4 from 10/23/16: Installation of the firmware ends with an error 7.
MIUI v8 (not updated)RC (4): A bunch of Chinese rubbish. It seems to be removing it through the titanium, but after rebooting everything in its places. Google Contacts are synchronized, imprints and taps on the sensor work.

P.S.: Review is complemented as tests.

Post has been editedSynus - 15.08.18, 06:41
Reason for editing: Add-ons



Rep: (761)
* Synus ,
Newcaliar Rum is still optimal on the battery.



Rep: (102)
GaiverXXi @ 07/28/2016, 10:30*
...
What for ?

Because the mobile Internet did not work.



Rep: (761)
* russur ,
Just restart. A little search will solve this problem, the appearance of sound and mobile Internet is solved by the reboot.



Rep: (4)
I decided to flash the phone after a couple of weeks, began to read the instructions, began with this multi instruction for everything! First here
Recommended before the firmware to make ADB Backup, looked pretty. Since the program did not want to see the ini file and did not see it. The parameters managed to enter on the command line directly and the process seems to be done. But after some time on the phone gives a google disk and backup error (it stops on this (it writes something type of backup). Backup file (I choose all the contents) is obtained only at 14 MB.
Has anyone come across it? Is it worth struggling or anyway from this backup after the firmware do not restore anything?



Rep: (188)
Colleagues, which of these two firmware newer: CM-12.1-Yog4PAS7DF-HAM-SIGNED and CM-12.1-YOG4PAS9IG-HAM-SIGNED.
Of course, if you argue logically, then 9ig new 7DF. Is it so?



Rep: (432)
Synus @ 07/29/2016, 02:08*
Is it so?
Synus ,: Yes2:



Rep: (188)
A couple of days ago, experimented with stock firmware and Viper - wanted to defeat sound jumps when unlocking and pulling the curtains. Attempts to my nothing crowned and I began to kastoma. A few hours ago, I noticed the stock firmware YOG4PAS9IG in the header and decided to put the experiment again. My joy was not to come when the Viper earned to the full and the sound was played by that through a ramp, which via vkontakte without jumps of volume with those scenarios, which are described above. The most unusual lies in the fact that I wanted to check again on yog4paas7df and everything became excellent there with sound. I do not know why nothing happened a couple of days ago ...



Rep: (13)
Good day. Question to specialists (Guru) After the firmware of the phone with Lenovo Shop on SM13 Knightley. Flow gang 20?



Rep: (432)
Mnbvcxz1 @ 07.29.16, 08:05*
Flow gang 20?
mnbvcxz1 ,
And you try, then you will reap the team: D

By the way, we had very good nightie. The battery holds about 8 - 8.5 hours of the screen. But the most important thing I have already for 3 days there are no microphone dumps, hear me well, apparently something fixed.
I didn't have dumps only on ZUI
Nightie dated 27.07 with pico gapps dated 09.06.

Attached Image
Attached Image
Attached Image


Post has been editedamraz - 29.07.16, 10:46



Rep: (96)
* amraz , what are the dumps? The microphone does not work just?



Rep: (38)
Synus @ 07/28/2016, 20:22*
Question to those who tried various custom firmware. On which firmware battery is spent the least?
And also my surface observations in a few hours of use (without energy consumption, for this you need to drive each firmware for a couple of days):

Dirty Unicorn. By consumption, stability, buns - the best. I tried everything percentaged in the post.



Rep: (432)
Renatique @ 07.29.16, 11:23*
And what are the dumps? The microphone does not work just?
renatique ,
After the call, he was heard a click and at that end did not hear me, I had to call back. Somewhere 10% of all calls.
I wrote about this in the support service, but I did not receive a concrete answer, because the problem is not common. And in the log of 26.07 there is some kind of fixes with telephony, I don't know it or not, but the problem has not yet been manifested.

Posted on 29/07/2016, 11:38:

GT_555 @ 07.29.16, 11:28*
Dirty Unicorn. By consumption, stability, buns - the best.
I confirm, wait for the update.
Nuclearrom I would add to the list.



Rep: (188)
GT_555 @ 07/29/2016, 11:28*
Dirty unicorn

And where to take it? The list of customs is not.

UPD: Found onXDA. You can add it to the list of customs in the header.

Post has been editedSynus - 29.07.16, 12:35



Rep: (54)
Synus @ 07/29/16, 12:08*
And where to take it? The list of customs is not.

Dirty-Unicorns.


Full version    

Help     rules

Now: 13.01.21, 12:48