S5222XELAF
S5222XELC3
S5222XELL1
S5222XXMJ1_OXEMJ1


How to download them, I follow the download link, the server is not found, reload the files please :(

Post has been editeddima12ak - 08.01.17, 12:56

dima12ak,
there is one.


S5222XXLL1_OXELK1.rar(56.29 MB)

If someone needs firmware, then there is a large selection:
https://1fichier.com/dir/hAi0iEnN

HELP!!!
Has anyone been able to remove the sim code after the firmware?

But how can I fix this miracle?

vasko318,
It is sewn by flashtool. threw in a personal where everything can be downloaded.

kudinov88,
unlock is removed only through the programmer.

Post has been editedcitroen @ - 06.02.17, 20:15

when I connect to the computer the driver is not determined what to do

firmware are located at this address. To download, you need registration.
http://oldph.one/index...downloads&showfile=125

I wish you all good health! For some strange reason, I have problems installing the archive with firmware from this site. Despite the fact that I am registered, he does not allow me to do this and writes the following:

how to overcome the problem.
I bought Samsung on the trash with a new battery, it became a pity.
The battery holds perfectly.
But the telefen problem turns off the SIMs in turn.
started looking for firmware and fletcher.
Itut stumbled upon all kinds of scammers who need both the number of bodies and the date of birth, and the length of my "x"

in short there are two problems
first - lay out non-working "fletcher" (((http: //www.mobilegsm.i...=1305&d=1358849905))))

but there is a working driver packagehttp: //www.mobilegsm.i...ntid=1304&d=1358849905

and working firmware --------https://yadi.sk/d/eTBTcuGe36UKz8
Here she is sweet!
I have passed the norms on my Samsung GT-S5222 (SEK).
Several languages ​​and so on ...


others only have a working fletcher; others have no working drivers

Here is the linkhttp://www.mobilegsm.in.ua/showthread.php?t=887
there is not a working fletcher, but you can take the firmware and others.
and fletcher can be taken in the same resource above.
In short, these are dances with a tambourine and pipes, shaman, try.
I tried several firmware, but I was not satisfied with it.
one came up, but only one SIM works.
On that ordeal ceased.
Not a "duos" but it works stably with a good battery.

--------------------
when a worthless flasher gives out such crap

Device synchronized.
Injecting EBL-Loader (RPSI).
Injecting EBL
Boot-loader is active
EBL version: 2150_OD_KL1_3.1 3..1
Boot mode is: BB
Using: Faster CRC, Writing all blocks, Skip data CRC, Skip protocol CRC
Package length is 16384 - protocol: 3.32
Baud rate set to 921600
Get flash id.
Flash ID is: 003000EC
Boot process finished

Start downloading item 'BOOT CORE PSI: psi.fls' 'from file' C: \ Documents and Settings \ Administrator \ Desktop \ Samsung USB \ USB \ Firmware Ukr \ S5222XXLL1_OXELK1 \ S5222XXLL1_psi.fls ''.
Sending sec-pack.
Load region 0
- Sending data.
Sending end-pack.
Checksum OK (0x0000)
Verify OK
Process time was 851 msec.

Start downloading item 'BOOT CORE SLB: slb.fls' 'from file' C: \ Documents and Settings \ Administrator \ Desktop \ Samsung USB \ USB \ Firmware Ukr \ S5222XXLL1_OXELK1 \ S5222XXLL1_slb.fls ''.
Sending sec-pack.
Load region 0
- Sending data.
Sending end-pack.
Checksum OK (0x0000)
Verify OK
Process time was 761 msec.

Start downloading item 'CODE: CATFISH.fls' 'from file' C: \ Documents and Settings \ Administrator \ Desktop \ Samsung USB \ USB \ Ukrainian Firmware \ S5222XXLL1_OXELK1 \ S5222XXLL1_BSY.fls ''.
Sending sec-pack.
Load region 0
- Sending data.
Load region 1
- Sending data.
Sending end-pack.
Checksum OK (0x0000)
Verify OK
Process time was 57.5 sec.

Start downloading item 'CODE: CATFISH.fls' 'from file' C: \ Documents and Settings \ Administrator \ Desktop \ Samsung USB \ USB \ Ukrainian Firmware \ S5222XXLL1_OXELK1 \ S5222XXLL1_CDS.fls ''.
Sending sec-pack.
Load region 0
- Sending data.
Sending end-pack.
Checksum OK (0x0000)
Verify OK
Process time was 851 msec.

Start downloading item 'CUST: temp_GT-S5222_OXE.dffs' 'from file' C: \ Documents and Settings \ Administrator \ Desktop \ Samsung USB \ USB \ Firmware Ukr \ S5222XXLL1_OXELK1 \ S5222OXELK1_CSC.dffs ''.
Sending sec-pack.
Load region 0
- Sending data.
Process time was 2 min 46 sec.

Stopped at 42% total, 99% current
Timeout occured during packet reception
The phone did not answer within the timeout period. This could be that the communication is interrupted or that the target SW is in an endless loop.
Check the connection to the phone, battery etc. If the problem persists report the error to the developer.
Channel 1 is succesfully closed.

-------------------------------------

Do not be alarmed, the bodies will not turn on anymore (as they say "brick"), but subsequent firmware will fix everything !!!
Do not forget to check the “delete files” fletcher ...
and don't forget to group the files in the correct order

------------
I was especially disappointed with sites where I spent a lot of time registering, but never got there

Windows 7 x64 does not install drivers. Where are the workers?

Files from the firmware should go in order:
psi.fls
slb.fls
BSY.fls
CDS.fls
Csc.fls

who knows how to download firmware S5222XELC3

At whom simlock try to enter five fives or four fives. I also asked for a password after the firmware.

Post has been editedzarafshan65 - 15.05.17, 15:38

Guys, in what form does this phone store passwords and logins that were saved to access sites through a standard browser? Is there any way to transfer or view this data?

Post has been editedTWIST_OF_HATE - 01.06.17, 23:51

People help me with these links:
http://firmware.sgh.ru/looking for S5222

S5222XELAF

S5222XELC3

S5222XELL1

S5222XXMJ1_OXEMJ1
lead to the same site where there is no firmware help

Thank you very good! Your site helped !! I flashed everything easily and clearly

Hello, please help after flashing the phone "white screen" but the music is playing for everyone, there used to be firmware S5222XELC3 (I couldn’t find it on the forum right now).
I requested S5222XELAE immediately at the first start everything went fine without a SIM card, inserted a card and a white screen appeared.
Help me to understand .
I updated everything according to the instructions.

All thanks figured out. When cleaning the phone, I loosely inserted the cable from the Screen.
Everything is working .. :) :)

Post has been editedDroopa - 29.08.17, 17:45

: P