[X]Assistant

[wb-frost]

IOS 9.1 - пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅ - пїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅ download

Apple iPad 2
Firmware:Official 9.1

Jailbreak: Not
Description of the problem:
After the upgrade, the main camera stopped working - only a black screen. The shutter does not click. When switching to video, the black screen remains, the shooting button is not pressed. Front camera is working normally. When you switch back to the main camera, a picture captured by the front camera remains on the screen.

There have been actions:
Reboot the device. Shut down for a few minutes. Reset to factory settings. Recovery from Aytyuns. Rollback to 9.0.2

Similar problems are described on the Apple forum with iPhones 5 and 5S.

Post has been editedwb-frost - 24.10.15, 10:40

[LMAO12]

wb-frost
try to roll back to 9.0.2

[wb-frost]

Rolled back. Did not help ((

[dynia]

Similar problem ... what to do?

[dynia]

Yes, in fact, this problem has appeared in many, hard reset, rollback to 9.0.2 does not help.Here is the linkOn Apple's forum ... while there are no recipes for treatment. One user shared the information that he had earned after turning on / off power saving. but it didn't work for me (i have 5s).

Post has been editeddynia - 24.10.15, 21:14

[wb-frost]

And you did not try to change through DFU?

[bu2bu2bu]

5s 9.1 is the same problem. The black screen when the main camera is turned on, sometimes switching the front-base-front-base, or closing the camera (it does not work the first time) helps, then you can shoot. once wrote, "iphone requires cooling before using the flash", although there was no overheating, after a reboot it disappeared

[wb-frost]

The worst thing is that Apple does not recognize that this is a iOS 9 glitch. People are told that this is a problem with hardware. I think that they did something there with the work of the camera, which does not work on all cameras. Most likely namudri with power to reduce energy consumption. But the individual features of some cameras appear and they are not included in this mode. So we get problems with a black screen. Naturally, this is due to a specific iron. If, when switching to the next version of the operating system, a brick is obtained from the camera, then this is a glitch of the manufacturer regardless of the fact that this is manifested on a small number of devices. Sucks that Apple doesn't recognize this ...

[wb-frost]

I upgraded to 6.1.3 using the utility for windows. The camera did not work. Can really iron ...

Post has been editedwb-frost - 01.11.15, 12:10

[bu2bu2bu]

In short, in the topic on the epl forum, the guys found a fix. It is necessary to reconnect the camera cable, I have not tried it on my own yet. If your hands reach carry to the workshop - accomplish your goal

[bu2bu2bu]

Generally tried. He took the guys, disassembled, reconnected the camera loop, turned on - the same story, black screen. I decided to flash it through dfu. After recovery, the camera earned from the first time, but literally 10 minutes, then the glorious square of Malevich. I decided to try again, but for a longer period. I waited about a minute, then gathered back. With vklyuyuchenii worked through time, but with an already stable pattern. After 30 minutes of testing the launch of the camera, a black screen appeared 1 to 20-30 starts the camera. Maybe someone useful info

[pistolpit86]

Hello, the same problem, only the flashlight still does not work and when you turn on the camera it says: the flash is turned off before using the iPhone you need to cool ... How can a camera replacement help? I tried all the methods listed above, nothing helped ... A couple of times after rebooting from two buttons, the camera and the flashlight turned on, but now they don’t work ...

[bu2bu2bu]

I wrote above what needs to be done, reconnect the camera and restore via dfu

[pistolpit86]

I did all this, but with no result ... Can I try to upgrade to 9.2?

[bu2bu2bu]

I would have indicated that the device. Try to change the camera then

[pistolpit86]

iPhone 5 16gb

[zxer]

On 5s, the camera cable is not under the board, reconnect it for 5 minutes. I lean towards the dead camera.

[pistolpit86]

I, too, am inclined to the dead camera, but I am confused by the fact that it sometimes turns on at one time after hard reboots ...

[cezvit]

The same trouble on the iPad Air-e 2, the upgrade to 9.2 did not bring any results

[Vovochka-s2]

Usually the problem is in the camera itself. How many have already changed them. If the phone has already been dealt with before and they haven’t put the protective cover in place (the masters like to do this) - the camera loop is often just unbuckled by itself. It mainly concerns only 5S.
Shl. I have never met glitches with a camera because of software problems on iPhones.

[Madfile]

Vovochka-s2 @ 12/09/2015, 12:24

I have never met glitches with a camera because of software problems on iPhones.

Here the answer is also relevant
iphone 6s camera problems